Material Safety Data Sheet
1. IDENTIFICATION OF THE
SUBSTANCE/PREPARATION
Product code NP0005
Product name NUPAGE ANTIOXIDANT
2. COMPOSITION/INFORMATION ON
INGREDIENTS
Hazardous/Non-hazardous Components
Chemical Name |
CAS-No |
EINECS-No. |
Weight % |
Classification |
N,N-Dimethylformamide |
68-12-2 |
200-679-5 |
7-13 |
F;R11 |
Sodium bisulfite |
7631-90-5 |
- |
10-30 |
- |
3. HAZARDS IDENTIFICATION
The product is classified and labelled in accordance with Directive 1999/45/EC
Classification
Indication of danger
Xi - Irritant
R -phrase(s)
R36 - Irritating to eyes
R38 - Irritating to skin
4. FIRST AID MEASURES
Skin contact
Wash off immediately with plenty of water
Eye contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15
minutes
Ingestion
Never give anything by mouth to an unconscious person
Inhalation
Move to fresh air
Notes to physician Treat symptomatically
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media Dry
chemical
Special protective equipment for Wear self-contained breathing
apparatus and protective suit
firefighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment
Methods for cleaning up Soak up
with inert absorbent material
7. HANDLING AND STORAGE
Handling No special handling
advice required
Storage Keep in properly
labelled containers
8. EXPOSURE CONTROLS / PERSONAL
PROTECTION
Exposure limits
Chemical Name
|
EU OEL (TWA) |
EU OEL (STEL) |
EU Skin Notation |
N,N-Dimethylformamide |
- |
- |
- |
Sodium bisulfite |
- |
- |
- |
Chemical Name
|
Austria OEL (MAK) |
Belgium (TWA) |
Denmark (TWA) |
Finland OEL (TWA) |
N,N-Dimethylformamide |
10 ppm
30mg/m³ |
10 ppm
30mg/m³ |
10 ppm
30mg/m³ |
- |
Sodium bisulfite |
- |
5mg/m³ |
5mg/m³ |
- |
Chemical Name |
France OEL (VME) |
Germany OEL (TWA) |
Ireland (TWA) |
Italy OEL (TWA) |
N,N-Dimethylformamide |
30mg/m³ |
10 ppm
30mg/m³ |
10 ppm
30mg/m³ |
- |
Sodium bisulfite |
5mg/m³ |
- |
5mg/m³ |
- |
Chemical Name |
Netherlands OEL (MAC) |
Spain OEL (TWA) |
United Kingdom |
N,N-Dimethylformamide |
5 ppm
15mg/m³ |
10 ppm
30mg/m³ |
10 ppm
30mg/m³ |
Sodium bisulfite |
5mg/m³ |
5mg/m³ |
5mg/m³ |
Engineering measures
Ensure adequate ventilation, especially in confined areas
Personal protective equipment
Respiratory protection
In case of insufficient ventilation wear suitable respiratory equipment
Hand protection
Impervious gloves.
Eye protection
Safety glasses with side-shields
Skin and body protection
Lightweight protective clothing
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice
Environmental exposure controls Prevent product from entering drains
9. PHYSICAL AND CHEMICAL PROPERTIES
General Information
Form
Liquid
10. STABILITY AND REACTIVITY
Stability
Stable under normal conditions.
Materials to avoid
No information available
Hazardous decomposition No information available
products
Polymerization
Hazardous polymerisation does not occur
11. TOXICOLOGICAL INFORMATION
Acute toxicity
Chemical Name |
LD50 (oral,rat/mouse) |
LD50 (dermal,rat/rabbit) |
LC50 (inhalation,rat/mouse) |
N,N-Dimethylformamide |
2800 mg/kg (Rat) |
4720 mg/kg (Rabbit) |
No data available |
Sodium bisulfite |
2 g/kg (Rat) |
No data available |
No data available |
Principle Routes of Exposure/
Potential Health effects
Eyes May
cause eye irritation with susceptible persons.
Skin
May cause skin irritation in susceptible persons.
Inhalation No information available
Ingestion No information available
Specific effects
Carcinogenic effects No information available
Mutagenic effects No information
available
Reproductive toxicity No information available
Sensitization
No information available
Target Organ Effects Eyes. Skin.
12. ECOLOGICAL INFORMATION
Ecotoxicity effects No information available.
Mobility
No information available.
Biodegradation No information
available.
Bioaccumulation No information
available.
13. DISPOSAL CONSIDERATIONS
Dispose of in accordance with local regulations
14. TRANSPORT INFORMATION
IATA
Proper shipping name Not classified as dangerous in the
meaning of transport regulations
Hazard Class
No information available
Subsidiary Class
No information available
Packing group
No information available
UN-No
No information available
15. REGULATORY INFORMATION
Indication of danger
Xi - Irritant
R -phrase(s)
R36 - Irritating to eyes
R38 - Irritating to skin
S -phrase(s)
S24/25 - Avoid contact with skin and eyes
International Inventories
Chemical Name |
EINECS |
ELINCS |
PICCS |
ENCS |
N,N-Dimethylformamide |
Listed |
- |
Listed |
Listed |
Sodium bisulfite |
Listed |
- |
Listed |
Listed |
Chemical Name |
TSCA |
CHINA |
AICS |
KECL |
N,N-Dimethylformamide |
Listed |
Listed |
Listed |
Listed |
Sodium bisulfite |
Listed |
Listed |
Listed |
Listed |
16. OTHER INFORMATION
This material is sold for research and development purposes only. It is not for
any human or animal therapeutic or clinical
diagnostic use. It is not intended for food, drug, household, agricultural, or
cosmetic use. An individual technically qualified
to handle potentially hazardous chemicals must supervise the use of this
material.
The above information was acquired by diligent search and/or investigation and
the recommendations are based on
prudent application of professional judgment. The information shall not be taken
as being all inclusive and is to be used
only as a guide. All materials and mixtures may be present unknown hazards and
should be used with caution. Since
Invitrogen Corporation cannot control the actual methods, volumes, or conditions
of use, the Company shall not be held
liable for any damages or losses resulting from the handling or from contact
with the product as described herein. THE
INFORMATION IN THIS MSDS DOES NOT CONSTITUTE A WARRANTY, EXPRESS OR IMPLIED,
INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTCULAR PURPOSE.
|