W P I |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cat. No. |
Description |
|
|
|
|
|
|
####-A |
Syringe Pump Audible Alarm (add “A” to end of SP Pump part number) |
|
|
|
|
|
|
####-P |
Programmable Ramp Option (SP200 Series) (add "P" to end of pump part
number when ordering) |
|
|
|
|
|
|
100042 |
ISO-HPO-2 Electrolyte (10ml) |
|
|
|
|
|
|
100084 |
ISO-H2S2 Filling Solution |
|
|
|
|
|
|
121 |
Window Discriminator |
|
|
|
|
|
|
1300M |
Microelectrode Beveler & start-up kit |
|
|
|
|
|
|
13024 |
Single Rackmount Kit (TBM4M & BP-1) |
|
|
|
|
|
|
13025 |
Dual Rackmount Kit (TBM4M & BP-1) |
|
|
|
|
|
|
13142 |
Nanoliter Injector Footswitch |
|
|
|
|
|
|
13156-100 |
Female Luer Fitting for 1/16" ID Tubing (pkg 100) |
|
|
|
|
|
|
13157-100 |
Female Luer Fitting for 3/32" ID Tubing (pkg 100) |
|
|
|
|
|
|
13158-100 |
Female Luer Fitting for 1/8" ID Tubing (pkg 100) |
|
|
|
|
|
|
13159-100 |
Female Luer Fitting for 5/32" ID Tubing (pkg 100) |
|
|
|
|
|
|
13160-100 |
Male Luer Fitting for 1/16" ID Tubing (pkg 100) |
|
|
|
|
|
|
13161-100 |
Male Luer Fitting for 3/32" ID Tubing (pkg 100) |
|
|
|
|
|
|
13162-100 |
Male Luer Fitting for 1/8" ID Tubing (pkg 100) |
|
|
|
|
|
|
13163-100 |
Male Luer Fitting for 5/32" ID Tubing (pkg 100) |
|
|
|
|
|
|
13246 |
Power Jumper Cable |
|
|
|
|
|
|
13316 |
Mini Glue Gun and (3) Glue Sticks |
|
|
|
|
|
|
13324 |
Adapter, double-banana (female), BNC (female) |
|
|
|
|
|
|
13338 |
Ring Light Adapter for PZM Series |
|
|
|
|
|
|
13347 |
BNC-to-double banana adapter |
|
|
|
|
|
|
13370 |
SMA Half-length Bulkhead Connector |
|
|
|
|
|
|
13388 |
Adapter, mini-banana plug to 2mm socket |
|
|
|
|
|
|
13395 |
SMA Bulkhead Feedthru Connector/Coupler, D-hole |
|
|
|
|
|
|
13410 |
UV Safety Goggles |
|
|
|
|
|
|
13451 |
Adapter, two 2 mm pins to BNC (F) |
|
|
|
|
|
|
1350M |
Micropositioner and Magnetic Stand |
|
|
|
|
|
|
13555 |
Serial Cable, DB9 (male) to DB9 (female), 6 ft (1.8 m) |
|
|
|
|
|
|
1358 |
Cable, Beetrodes, BNC (male), 2 mm pin, 3 ft (0.9 m) |
|
|
|
|
|
|
13620 |
Low-noise cable, 2 mm gold pin to 2 mm gold jack, 2 ft (0.6 m) |
|
|
|
|
|
|
13685 |
Cable, linking, SP Series pump-to-pump, modular phone plugs, 7 ft (2.1
m) |
|
|
|
|
|
|
13740 |
Ultrasonic Detergent (4 lb) |
|
|
|
|
|
|
13776 |
Adapts ref. electrode to VF4 ground jack, Banana (male), 2 mm jack |
|
|
|
|
|
|
13822-10 |
Side Clamp for 1/8" Tubing (pkg 10) |
|
|
|
|
|
|
13834 |
2.5 mm Square Box Filament, 2.5 mm wide |
|
|
|
|
|
|
13835 |
Trough Filament, 2 mm wide |
|
|
|
|
|
|
13836 |
Trough Filament, 3 mm wide |
|
|
|
|
|
|
13854 |
BNC T-connector |
|
|
|
|
|
|
13893 |
Replacement 3-pin connector |
|
|
|
|
|
|
13962 |
Footswitch fˇ(c)or SP200 Series Pumps |
|
|
|
|
|
|
14003 |
Vannas Scissors, 8cm, straight 5mm blades, 0.1mm tip |
|
|
|
|
|
|
14003-G |
Vannas Scissors, 8cm, straight 5mm blades, 0.1mm tip (G) |
|
|
|
|
|
|
14011 |
Luer Valve Assortment Kit |
|
|
|
|
|
|
14012 |
Luer-to-Tubing Coupler Assortment Kit (Polypropylene) |
|
|
|
|
|
|
14034-40 |
Injection Site, Male Luer Lock (pkg 40) |
|
|
|
|
|
|
14035-10 |
3-Way Stopcock with Luer Lock (pkg 10) |
|
|
|
|
|
|
14036-15 |
4-Way Luer Stopcock, Blue Tint (pkg 15) |
|
|
|
|
|
|
14039-10 |
Check Valve, Male/Female Luer Locks (pkg 10) |
|
|
|
|
|
|
14040-50 |
Pinch Clamp for 7mm Tubing (pkg 50) |
|
|
|
|
|
|
14041-60 |
Roller Clamp for 3/16" Tubing (pkg 60) |
|
|
|
|
|
|
14042-100 |
Slide Clamp for 2.5 mm OD Tubing (pkg 100) |
|
|
|
|
|
|
14043-20 |
Roller Clamp, Large Bore (pkg 20) |
|
|
|
|
|
|
14044-5 |
Check Valve, Double, Syringe Activated (pkg 5) |
|
|
|
|
|
|
14045-20 |
Check Valve, Slip Luer Lock, Needleless Syringe (pkg 20) |
|
|
|
|
|
|
14047-10 |
4-Port Infusion Y Swivel Thread (pkg 10) |
|
|
|
|
|
|
14048-20 |
3-Port Infusion Y Swivel Thread (pkg 20) |
|
|
|
|
|
|
14051-100 |
Pinch Clamp, Natural for 5mm Tubing (pkg 100) |
|
|
|
|
|
|
14054-10 |
1-Way Stopcock with Luer Slip (pkg 10) |
|
|
|
|
|
|
14055-2 |
4-Port Manifold (pkg 2) |
|
|
|
|
|
|
14057-10 |
4-Way Stopcock with Luer Lock, Blue (pkg 10) |
|
|
|
|
|
|
14058-10 |
4-Way Stopcock with Luer Lock, Red (pkg 10) |
|
|
|
|
|
|
14059-2 |
3-Port Manifold (pkg 2) |
|
|
|
|
|
|
14061-60 |
Male/Female Luer Plug (pkg 60) |
|
|
|
|
|
|
14073-4 |
Open-sided Frame Clamp (pkg of 4) |
|
|
|
|
|
|
14074 |
3 mm Square Box Filament, 2 mm wide |
|
|
|
|
|
|
14079 |
Forceps, 14cm, round hollow handle, straight, 0.15mm tips with tying
plates |
|
|
|
|
|
|
14080 |
Needle Holder, round handle, 14cm, 0.3mm tip, straight smooth jaws |
|
|
|
|
|
|
14080-G |
Needle Holder, round handle, 14cm, 0.3mm tip, straight smooth jaws (G) |
|
|
|
|
|
|
14081 |
Needle Holder, round handle, 14cm, 0.4mm tip, curved smooth jaws |
|
|
|
|
|
|
14081-G |
Needle Holder, round handle, 14cm, 0.4mm tip, curved smooth jaws (G) |
|
|
|
|
|
|
14084 |
Approximator, 20g pressure for 0.5 to 1.0 mm vessel |
|
|
|
|
|
|
14088 |
Power Cord, Australian 240V, 6 ft (1.8 m) |
|
|
|
|
|
|
14089 |
Rongeur, Friedman, 13cm, jaw width 2.5mm |
|
|
|
|
|
|
14089-G |
Rongeur, Friedman, 13cm, jaw width 2.5mm (G) |
|
|
|
|
|
|
14090 |
Rongeur, Mini Blumenthal, 11cm, jaw width 2mm |
|
|
|
|
|
|
14090-G |
Rongeur, Mini Blumenthal, 11cm, jaw width 2mm (G) |
|
|
|
|
|
|
14091 |
Rongeur, Blumenthal, 15cm, jaw width 3mm |
|
|
|
|
|
|
14091-G |
Rongeur, Blumenthal, 15cm, jaw width 3mm (G) |
|
|
|
|
|
|
14095 |
Tweezer, Dumont #5, Stainless steel, Medical Biology, 11cm, 0.05 x 0.01
mm tip |
|
|
|
|
|
|
14096 |
Tweezer, Dumont #5, Titanium, 11cm, 0.1 x 0.06 mm tip |
|
|
|
|
|
|
14097 |
Tweezer, Dumont #7, Inox, 12cm, 0.17 x 0.1 mm tip |
|
|
|
|
|
|
14098 |
Tweezer, Dumont #5, Dumoxel, non-magnetic, 11cm, 0.1 x 0.06 mm tip |
|
|
|
|
|
|
14099 |
Tweezer, Dumont #55, Inox, Biology, 11cm, 0.05 x 0.01 mm tip |
|
|
|
|
|
|
14101 |
Tweezer, Dumont #5, Stainless steel, Medical Biology, 45°bent, 11cm,
0.05 x 0.01 mm tip |
|
|
|
|
|
|
14104 |
Record/Inject Electrode Holder for MPM10 & MPM20 |
|
|
|
|
|
|
14106 |
Footswitch for MPM10 & MPM20 |
|
|
|
|
|
|
14109 |
Needle Holder, extra delicate, 12.5cm, straight serrated jaws |
|
|
|
|
|
|
14109-G |
Needle Holder, extra delicate, 12.5cm, straight serrated jaws (G) |
|
|
|
|
|
|
14110 |
Needle Holder, 14cm, straight serrated jaws |
|
|
|
|
|
|
14110-G |
Needle Holder, 14cm, straight serrated jaws (G) |
|
|
|
|
|
|
14111 |
Spring scissors, 14cm, round handle, 6.5mm blade, straight |
|
|
|
|
|
|
14111-G |
Spring scissors, 14cm, round handle, 6.5mm blade, straight (G) |
|
|
|
|
|
|
14112 |
Spring scissors, 14cm, round handles, 7mm blade, curved |
|
|
|
|
|
|
14112-G |
Spring scissors, 14cm, round handles, 7mm blade, curved (G) |
|
|
|
|
|
|
14113 |
Forceps, 15cm, round hollow handle, straight, 0.15 mm tip |
|
|
|
|
|
|
14113-G |
Forceps, 15cm, round hollow handle, straight, 0.15 mm tip (G) |
|
|
|
|
|
|
14114 |
Forceps, 15cm, round hollow handle, curved, 0.3 mm tip |
|
|
|
|
|
|
14114-G |
Forceps, 15cm, round hollow handle, curved, 0.3 mm tip (G) |
|
|
|
|
|
|
14115 |
Needle Holder with scissors, round handle, 14cm, 0.3mm tip, straight
smooth jaws |
|
|
|
|
|
|
14116 |
Johns Hopkins Bulldog Clamp, 6.5cm, straight serrated jaws |
|
|
|
|
|
|
14116-G |
Johns Hopkins Bulldog Clamp, 6.5cm, straight serrated jaws (G) |
|
|
|
|
|
|
14117 |
Johns Hopkins Bulldog Clamp, 6.5cm, curved serrated jaws |
|
|
|
|
|
|
14117-G |
Johns Hopkins Bulldog Clamp, 6.5cm, curved serrated jaws (G) |
|
|
|
|
|
|
14118 |
Small Bulldog Clamp, 6cm, straight serrated jaws |
|
|
|
|
|
|
14118-G |
Small Bulldog Clamp, 6cm, straight serrated jaws (G) |
|
|
|
|
|
|
14119 |
Micro Bulldog Clamp, 3cm, curved, 8 x 1.2 mm serrated jaws |
|
|
|
|
|
|
14119-G |
Micro Bulldog Clamp, 3cm, curved, 8 x 1.2 mm serrated jaws (G) |
|
|
|
|
|
|
14120 |
Vessel Clips, 30g pressure, 5 x 1.5 mm jaws (pkg 5) |
|
|
|
|
|
|
14121 |
Vessel Clips, 60g pressure, 8 x 1.5 mm jaws (pkg 5) |
|
|
|
|
|
|
14122 |
Vannas Scissors, 8cm, curved, 5mm blade, 0.1 mm tip |
|
|
|
|
|
|
14122-G |
Vannas Scissors, 8cm, curved, 5mm blade, 0.1 mm tip (G) |
|
|
|
|
|
|
14124 |
McPherson-Vannas Scissors, 8cm, straight 5mm blade, 0.1mm tip |
|
|
|
|
|
|
14124-G |
McPherson-Vannas Scissors, 8cm, straight 5mm blade, 0.1mm tip (G) |
|
|
|
|
|
|
14125 |
Spring Scissors, 12cm, 12mm extra fine & long blades, straight |
|
|
|
|
|
|
14126 |
Spring Scissors, 12cm, 12mm extra fine & long blades, curved |
|
|
|
|
|
|
14127 |
Spring Scissors, 10.5cm, 8mm blade, curved |
|
|
|
|
|
|
14127-G |
Spring Scissors, 10.5cm, 8mm blade, curved (G) |
|
|
|
|
|
|
14128 |
Barraquer Iris scissors, 6cm, 7mm blades, sharp point |
|
|
|
|
|
|
14128-G |
Barraquer Iris scissors, 6cm, 7mm blades, sharp point (G) |
|
|
|
|
|
|
14129 |
Knapp Speculum 8.3cm, 15 x 6 mm blades, maximum spread 25mm |
|
|
|
|
|
|
14129-G |
Knapp Speculum 8.3cm, 15 x 6 mm blades, maximum spread 25mm (G) |
|
|
|
|
|
|
14130 |
Wire Speculum, 5cm, 10mm blades, maximum spread 13mm |
|
|
|
|
|
|
14130-G |
Wire Speculum, 5cm, 10mm blades, maximum spread 13mm (G) |
|
|
|
|
|
|
14131 |
Stevenson Retractor, 8 cm, 3x3 prongs, 3 mm deep, maximum spread 15mm |
|
|
|
|
|
|
14131-G |
Stevenson Retractor, 8 cm, 3x3 prongs, 3 mm deep, maximum spread 15mm
(G) |
|
|
|
|
|
|
14132 |
Needle Holder, round handle, 12.5cm, 0.4mm tip, curved smooth jaws |
|
|
|
|
|
|
14133 |
Stevens Needle Holder, 13cm, 1mm tip, straight serrated jaw |
|
|
|
|
|
|
14133-G |
Stevens Needle Holder, 13cm, 1mm tip, straight serrated jaw (G) |
|
|
|
|
|
|
14134 |
Razor blade holder, round tip, 12.5cm, convex/concave jaw |
|
|
|
|
|
|
14134-G |
Razor blade holder, round tip, 12.5cm, convex/concave jaw (G) |
|
|
|
|
|
|
14135 |
Micro Dissecting Knife, 13cm, 1mm blade, right angle |
|
|
|
|
|
|
14136 |
Tyrell Hook, sharp, 13cm |
|
|
|
|
|
|
14136-G |
Tyrell Hook, sharp, 13cm (G) |
|
|
|
|
|
|
14137 |
Castroviejo needle holder, 14cm, straight 1.2mm wide serrated tips with
lock |
|
|
|
|
|
|
14137-G |
Castroviejo needle holder, 14cm, straight 1.2mm wide serrated tips with
lock (G) |
|
|
|
|
|
|
14139 |
Razor Blade Holder, 12.5cm, round tip, S-shape jaw |
|
|
|
|
|
|
14140 |
Graefe Forceps, 7cm long, 1 x 2 teeth, 0.7 mm straight tip |
|
|
|
|
|
|
14140-G |
Graefe Forceps, 7cm long, 1 x 2 teeth, 0.7 mm straight tip (G) |
|
|
|
|
|
|
14141 |
Graefe Forceps, 7cm long, 1 x 2 teeth, 0.7 mm curved tip |
|
|
|
|
|
|
14141-G |
Graefe Forceps, 7cm long, 1 x 2 teeth, 0.7 mm curved tip (G) |
|
|
|
|
|
|
14142 |
Graefe Forceps, 7cm long, serrated, 0.7 mm straight tip |
|
|
|
|
|
|
14142-G |
Graefe Forceps, 7cm long, serrated, 0.7 mm straight tip (G) |
|
|
|
|
|
|
14177 |
McPherson-Vannas Dissecting Spring Scissors, 8cm, straight 3mm blades,
0.1mm tip |
|
|
|
|
|
|
14177-G |
McPherson-Vannas Dissecting Spring Scissors, 8cm, straight 3mm blades,
0.1mm tip (G) |
|
|
|
|
|
|
14187 |
Tweezer, Dumont #7, Titanium, 12cm, 0.17 x 0.1 mm tip |
|
|
|
|
|
|
14188 |
Tweezer, Dumont #7, Dumoxel, Stainless steel, non-magnetic, 12cm, 0.17 x
0.1 mm tips |
|
|
|
|
|
|
14189 |
Applying Forceps, 10cm, for #14084 & Vessel Clips #14120, #15911 &
#14121 |
|
|
|
|
|
|
14192 |
Scissors, Operating, 14cm, straight, sharp/blunt |
|
|
|
|
|
|
14192-G |
Scissors, Operating, 14cm, straight, sharp/blunt (G) |
|
|
|
|
|
|
14206 |
Needle holder, round hollow handles, 14cm, curved smooth jaws |
|
|
|
|
|
|
14207 |
Needle Holder, round hollow handles, 14cm, straight smooth jaws |
|
|
|
|
|
|
14208 |
Scissors, round hollow handles, 14cm, curved |
|
|
|
|
|
|
14209 |
Forceps, 15cm, round hollow handles, 45°bent, 0.15mm tip |
|
|
|
|
|
|
14210 |
Forceps, 14cm, round hollow handles, straight, 0.3mm tips with tying
plates |
|
|
|
|
|
|
14211 |
Forceps, 14cm, round hollow handles, straight, 0.15mm tip |
|
|
|
|
|
|
14212 |
Scissors, round hollow handles, 14cm, straight |
|
|
|
|
|
|
14213 |
Instruments Case, stainless steel, 197 x 107 x 32mm |
|
|
|
|
|
|
14214 |
Scissors, Metzenbaum, Supercut, 12.5cm, straight |
|
|
|
|
|
|
14214-G |
Scissors, Metzenbaum, Supercut, 12.5cm, straight (G) |
|
|
|
|
|
|
14215 |
Scissors, Metzenbaum, Supercut, 12.5cm, curved |
|
|
|
|
|
|
14215-G |
Scissors, Metzenbaum, Supercut, 12.5cm, curved (G) |
|
|
|
|
|
|
14216 |
Supercut scissors, Mayo, 14cm, straight |
|
|
|
|
|
|
14216-G |
Supercut scissors, Mayo, 14cm, straight (G) |
|
|
|
|
|
|
14217 |
Supercut scissors, Mayo, 14cm, curved |
|
|
|
|
|
|
14217-G |
Supercut scissors, Mayo, 14cm, curved (G) |
|
|
|
|
|
|
14218 |
Scissors, Iris, Supercut, 10cm, straight |
|
|
|
|
|
|
14218-G |
Scissors, Iris, Supercut, 10cm, straight (G) |
|
|
|
|
|
|
14219 |
Scissors, Iris, Supercut, 10cm, curved |
|
|
|
|
|
|
14219-G |
Scissors, Iris, Supercut, 10cm, curved (G) |
|
|
|
|
|
|
14220 |
Supercut scissors, Tenotomy, 12.5cm, straight, sharp tip |
|
|
|
|
|
|
14220-G |
Supercut scissors, Tenotomy, 12.5cm, straight, sharp tip (G) |
|
|
|
|
|
|
14221 |
Supercut scissors, Tenotomy, 12.5cm, curved, sharp tip |
|
|
|
|
|
|
14221-G |
Supercut scissors, Tenotomy, 12.5cm, curved, sharp tip (G) |
|
|
|
|
|
|
14224 |
Scissors, Iris, Supercut, 12.5cm, curved |
|
|
|
|
|
|
14224-G |
Scissors, Iris, Supercut, 12.5cm, curved (G) |
|
|
|
|
|
|
14225 |
Scissors, Iris, Supercut, 12.5cm, straight |
|
|
|
|
|
|
14225-G |
Scissors, Iris, Supercut, 12.5cm, straight (G) |
|
|
|
|
|
|
14226 |
Adson Forceps, 12cm, serrated tip |
|
|
|
|
|
|
14226-G |
Adson Forceps, 12cm, serrated tip (G) |
|
|
|
|
|
|
14239 |
Eagle Pipetter Stand |
|
|
|
|
|
|
14240 |
ALM self-retaining Retractor, 4x4 prongs, 7cm, maximum spread 55mm |
|
|
|
|
|
|
14240-G |
ALM self-retaining Retractor, 4x4 prongs, 7cm, maximum spread 55mm (G) |
|
|
|
|
|
|
14253 |
Replacement Lamp, 20W/6V (pkg of 5) |
|
|
|
|
|
|
14254 |
BNC Straight Adapter (female-female) |
|
|
|
|
|
|
14292 |
Rongeur, Micro Friedman, 16cm, jaw width 1.3mm |
|
|
|
|
|
|
14292-G |
Rongeur, Micro Friedman, 16cm, jaw width 1.3mm (G) |
|
|
|
|
|
|
14342 |
Ultrasonic Detergent (1 gal) |
|
|
|
|
|
|
14361 |
Needle holder, Titanium, 14cm, straight smooth jaws |
|
|
|
|
|
|
14364 |
Vannas Scissors, Titanium, 8cm, straight 3mm blade |
|
|
|
|
|
|
14365 |
Vannas Scissors, Titanium, 8cm, angled, 3mm blade |
|
|
|
|
|
|
14393 |
Dissecting Scissors, 10cm, straight |
|
|
|
|
|
|
14393-G |
Dissecting Scissors, 10cm, straight (G) |
|
|
|
|
|
|
14394 |
Dissecting Scissors, 10cm, curved |
|
|
|
|
|
|
14394-G |
Dissecting Scissors, 10cm, curved (G) |
|
|
|
|
|
|
14395 |
Supercut Scissors, Tenotomy, 10cm, straight, sharp tip |
|
|
|
|
|
|
14395-G |
Supercut Scissors, Tenotomy, 10cm, straight, sharp tip (G) |
|
|
|
|
|
|
14396 |
Supercut scissors, Tenotomy, 10cm, curved, sharp tips |
|
|
|
|
|
|
14396-G |
Supercut scissors, Tenotomy, 10cm, curved, sharp tips (G) |
|
|
|
|
|
|
14404 |
Dry Sterilizer, 110V |
|
|
|
|
|
|
14405 |
Extra Glass Beads |
|
|
|
|
|
|
14417-F-xxx-yy |
Heated Stage Insert, Flat Center Top & Controller |
|
|
|
|
|
|
14417-R-xxx-yy |
Heated Stage Insert, Raised Center Top & Controller |
|
|
|
|
|
|
15590 |
Clear hose, 2.5" diam, 4.5 ft |
|
|
|
|
|
|
15623 |
Serial cable, SP Series pump, 9-pin “D” connector, 5 ft (1.5 m) |
|
|
|
|
|
|
15624 |
Serial cable, SP Series pump, Macintosh connector, 5 ft (1.5 m) |
|
|
|
|
|
|
15657 |
Cable, Grass Transducer to TBM4M |
|
|
|
|
|
|
15676 |
Serial cable, SP Series pump, 25-pin “D” connector, 5 ft (1.5 m) |
|
|
|
|
|
|
1571 |
Clear Silicone Rubber Sealant (4.7 oz) |
|
|
|
|
|
|
15790 |
Replacement Probe Handle |
|
|
|
|
|
|
15807 |
Cleaning Solution Concentrate (125 ml) |
|
|
|
|
|
|
15810 |
Microsensor Adapter Cable |
|
|
|
|
|
|
15867 |
Footswitch for Micro4 |
|
|
|
|
|
|
15873 |
Optional Angled Electrode Holder (13 cm long) |
|
|
|
|
|
|
15905 |
Spring Scissors, 14cm, 8mm blade, straight |
|
|
|
|
|
|
15905-G |
Spring Scissors, 14cm, 8mm blade, straight (G) |
|
|
|
|
|
|
15906 |
Spring Scissors, 14cm, 8mm blade, curved |
|
|
|
|
|
|
15906-G |
Spring Scissors, 14cm, 8mm blade, curved (G) |
|
|
|
|
|
|
15908 |
Dressing Forceps, Ultra Fine, 12.5 cm, serrated, straight sharp tip |
|
|
|
|
|
|
15910 |
Dilator Forceps, 14 cm, round hollow handles, straight, 0.15mm tip |
|
|
|
|
|
|
15911 |
Vessel Clips, 10g pressure, 5 x 0.8 mm jaws (pkg 5) |
|
|
|
|
|
|
15914 |
Iris Forceps, serrated, 10cm, 0.8 mm straight tip |
|
|
|
|
|
|
15914-G |
Iris Forceps, serrated, 10cm, 0.8 mm straight tip (G) |
|
|
|
|
|
|
15915 |
Iris Forceps, serrated, 10cm, 0.8 mm curved tip |
|
|
|
|
|
|
15915-G |
Iris Forceps, serrated, 10cm, 0.8 mm curved tip (G) |
|
|
|
|
|
|
15916 |
Iris Forceps, 1 x 2 teeth, 10cm, 0.8 mm straight tip |
|
|
|
|
|
|
15916-G |
Iris Forceps, 1 x 2 teeth, 10cm, 0.8 mm straight tip (G) |
|
|
|
|
|
|
15917 |
Iris Forceps, 1 x 2 teeth, 10cm, 0.8 mm curved tip |
|
|
|
|
|
|
15917-G |
Iris Forceps, 1 x 2 teeth, 10cm, 0.8 mm curved tip (G) |
|
|
|
|
|
|
15918 |
Tissue Forceps, 12.5 cm, 1 x 2 teeth |
|
|
|
|
|
|
15918-G |
Tissue Forceps, 12.5 cm, 1 x 2 teeth (G) |
|
|
|
|
|
|
15920 |
Mosquito Hemostatic Forceps, 12.5 cm, straight |
|
|
|
|
|
|
15920-G |
Mosquito Hemostatic Forceps, 12.5 cm, straight (G) |
|
|
|
|
|
|
15921 |
Mosquito Hemostatic Forceps, 12.5 cm, curved |
|
|
|
|
|
|
15921-G |
Mosquito Hemostatic Forceps, 12.5 cm, curved (G) |
|
|
|
|
|
|
15922 |
Dissecting Scissors, 12.5 cm, straight |
|
|
|
|
|
|
15922-G |
Dissecting Scissors, 12.5 cm, straight (G) |
|
|
|
|
|
|
15923 |
Dissecting Scissors, 12.5cm, curved |
|
|
|
|
|
|
15923-G |
Dissecting Scissors, 12.5cm, curved (G) |
|
|
|
|
|
|
15924 |
Scissors, Operating, 18cm, straight, sharp/sharp |
|
|
|
|
|
|
15924-G |
Scissors, Operating, 18cm, straight, sharp/sharp (G) |
|
|
|
|
|
|
15926 |
Needle Holder, 14cm, serrated tungsten carbide jaws |
|
|
|
|
|
|
15926-G |
Needle Holder, 14cm, serrated tungsten carbide jaws (G) |
|
|
|
|
|
|
15934 |
Replacement Beveler Disk Plate |
|
|
|
|
|
|
15975 |
Adapter, 2 mm socket, 1 mm pin |
|
|
|
|
|
|
15976 |
Adapter, 1 mm socket, 2 mm pin |
|
|
|
|
|
|
15978 |
P-5 & P-7 Adapter for use with PUL-100 puller |
|
|
|
|
|
|
15997 |
Replacement ISO-DAM Cable |
|
|
|
|
|
|
1965 |
Foam Ring for 0.75 - 1.0 mm glass |
|
|
|
|
|
|
1966 |
Foam Ring for 1.2 - 1.5 mm glass |
|
|
|
|
|
|
1967 |
Foam Ring for 2.0 mm glass |
|
|
|
|
|
|
1B100-3 |
Glass, Single Capillary, 1.0 mm x 3" (76 mm), Pkg/500 |
|
|
|
|
|
|
1B100-4 |
Glass, Single Capillary, 1.0 mm x 4" (102 mm), Pkg/500 |
|
|
|
|
|
|
1B100-6 |
Glass, Single Capillary, 1.0 mm x 6" (152 mm), Pkg/500 |
|
|
|
|
|
|
1B100F-3 |
Glass, Single Capillary, 1.0 mm x 3" (76 mm), Fil, Pkg/500 |
|
|
|
|
|
|
1B100F-4 |
Glass, Single Capillary, 1.0 mm x 4" (102 mm), Fil, Pkg/500 |
|
|
|
|
|
|
1B100F-6 |
Glass, Single Capillary, 1.0 mm x 6" (152 mm), Fil, Pkg/500 |
|
|
|
|
|
|
1B120-3 |
Glass, Single Capillary, 1.2 mm x 3" (76 mm), Pkg/350 |
|
|
|
|
|
|
1B120-4 |
Glass, Single Capillary, 1.2 mm x 4" (102 mm), Pkg/350 |
|
|
|
|
|
|
1B120-6 |
Glass, Single Capillary, 1.2 mm x 6" (152 mm), Pkg/350 |
|
|
|
|
|
|
1B120F-3 |
Glass, Single Capillary, 1.2 mm x 3" (76 mm), Fil, Pkg/350 |
|
|
|
|
|
|
1B120F-4 |
Glass, Single Capillary, 1.2 mm x 4" (102 mm), Fil, Pkg/400 |
|
|
|
|
|
|
1B120F-6 |
Glass, Single Capillary, 1.2 mm x 6" (152 mm), Fil, Pkg/350 |
|
|
|
|
|
|
1B150-3 |
Glass, Single Capillary, 1.5 mm x 3" (76 mm), Pkg/300 |
|
|
|
|
|
|
1B150-4 |
Glass, Single Capillary, 1.5 mm x 4" (102 mm), Pkg/300 |
|
|
|
|
|
|
1B150-6 |
Glass, Single Capillary, 1.5 mm x 6" (152 mm), Pkg/225 |
|
|
|
|
|
|
1B150F-3 |
Glass, Single Capillary, 1.5 mm x 3" (76 mm), Fil, Pkg/300 |
|
|
|
|
|
|
1B150F-4 |
Glass, Single Capillary, 1.5 mm x 4" (102 mm), Fil, Pkg/225 |
|
|
|
|
|
|
1B150F-6 |
Glass, Single Capillary, 1.5 mm x 6" (152 mm), Fil, Pkg/225 |
|
|
|
|
|
|
1B200-4 |
Glass, Single Capillary, 2.0 mm x 4" (102 mm), Pkg/200 |
|
|
|
|
|
|
1B200-6 |
Glass, Single Capillary, 2.0 mm x 6" (152 mm), Pkg/125 |
|
|
|
|
|
|
1B200F-4 |
Glass, Single Capillary, 2.0 mm x 4" (102 mm), Fil, Pkg/125 |
|
|
|
|
|
|
1B200F-6 |
Glass, Single Capillary, 2.0 mm x 6" (152 mm), Fil, Pkg/125 |
|
|
|
|
|
|
2026-10 |
Socket, 2 mm unwired (pkg of 10) |
|
|
|
|
|
|
2033 |
Black Insulated Mini-Banana Plug |
|
|
|
|
|
|
2034 |
Red Insulated Mini-Banana Plug |
|
|
|
|
|
|
2035 |
Uninsulated Mini-Banana Plug |
|
|
|
|
|
|
2101 |
9V Alkaline Battery |
|
|
|
|
|
|
2131 |
Cable, shielded transducer stock none none 25 ft (7.6 m) |
|
|
|
|
|
|
2478 |
Replacement Mirrored Disk |
|
|
|
|
|
|
2479 |
Replacement “O” Ring |
|
|
|
|
|
|
2505 |
Ľ" (6.3 mm) diameter handle |
|
|
|
|
|
|
2541 |
Driven guard shield for 705PF Probe |
|
|
|
|
|
|
2547 |
Driven Guard Shield for 712P, 715P & FD223P Probes |
|
|
|
|
|
|
260 |
Dual Microiontophoresis Current Generator |
|
|
|
|
|
|
2851 |
BNC-to-BNC Cable (6 ft) |
|
|
|
|
|
|
2932 |
Rack Mount Kit, 3.5" high |
|
|
|
|
|
|
2933 |
Rack Mount Kit, 5Ľ" high |
|
|
|
|
|
|
2935 |
Rackmount Kit, 8ľ" high |
|
|
|
|
|
|
2B150F-4 |
Glass, Two-Barrel, 1.5 mm x 4" (102 mm), Fil, Pkg/100 |
|
|
|
|
|
|
2B150F-6 |
Glass, Two-Barrel, 1.5 mm x 6" (152 mm), Fil, Pkg/100 |
|
|
|
|
|
|
300033 |
Adapter for Micro4 |
|
|
|
|
|
|
300035 |
6/32 stability button for SP200 series pumps |
|
|
|
|
|
|
300040 |
Adapter Extension, 2 mm sockets, 4" (10 cm) |
|
|
|
|
|
|
300051 |
Fiber Optic Collimator (SMA) |
|
|
|
|
|
|
300052 |
Fiber Optic Collimator (ST) |
|
|
|
|
|
|
300102 |
Adapter Extension, 2mm socket to 0.31" socket, 4" length |
|
|
|
|
|
|
300276 |
Replacement platinum temperature probe |
|
|
|
|
|
|
300305 |
ATP Adapter (0.031 |
|
|
|
|
|
|
3006 |
Power Cord, US 120V, grounded, 6 ft (1.8 m) |
|
|
|
|
|
|
3072 |
6 Replacement Modular Cables (DAM50 & DAM70) |
|
|
|
|
|
|
3161 |
8-pin DIN Plug |
|
|
|
|
|
|
3259 |
Optional Footswitch |
|
|
|
|
|
|
3260 |
Optional Footswitch |
|
|
|
|
|
|
3294 |
Ground wire for DAM80 probe, Clip, 3 ft (0.9 m) |
|
|
|
|
|
|
3301 |
Power Cord, European 240V, 6 ft (1.8 m) |
|
|
|
|
|
|
3302 |
Power Cord, British 240V, 6 ft (1.8 m) |
|
|
|
|
|
|
3316 |
Replacement Input Kit |
|
|
|
|
|
|
3414 |
9V NIMH Battery |
|
|
|
|
|
|
3417-10 |
2 mm plug, unwired (pkg of 10) |
|
|
|
|
|
|
3468 |
Dual Rack Mount Kit |
|
|
|
|
|
|
3469 |
Single Rack Mount Kit |
|
|
|
|
|
|
3484 |
Rackmount Kit for DAM Series amplifiers |
|
|
|
|
|
|
3485 |
Ringstand Mounting Kit |
|
|
|
|
|
|
3491 |
Extension for any 8-pin DIN (male), DIN (female), 5 ft (1.5 m) |
|
|
|
|
|
|
3492 |
Connector, adapts WPI transducers to non-WPI equipment, DIN (female),
unwired |
|
|
|
|
|
|
3508 |
BNC-to-US Standard pH Adapter |
|
|
|
|
|
|
3517 |
Cable, shielded, Modular phone plug, 4-wire, 3 ft (0.9 m), Pkg/2 |
|
|
|
|
|
|
3531 |
Alumina Abrasive, 0.05 mm (5 g) |
|
|
|
|
|
|
3545 |
120V AC Adapter |
|
|
|
|
|
|
3546 |
240V AC Adapter (Euro) |
|
|
|
|
|
|
3547 |
240V AC Adapter (UK) |
|
|
|
|
|
|
3551 |
Alumina Abrasive, 0.30 mm (5 g) |
|
|
|
|
|
|
3578 |
Adapter cable for Ag/AgCl pellets, 2 mm pin, 5 ft (1.5 m) |
|
|
|
|
|
|
3579-20 |
Replacement luer fittings for tubing connections (pkg of 20) |
|
|
|
|
|
|
3669 |
Tubing Kit (flexible hose and luer fittings) |
|
|
|
|
|
|
3670 |
Double banana plug with solder turret terminals |
|
|
|
|
|
|
3718 |
8-Pin DIN Plug Start-up Kit (pkg 4) |
|
|
|
|
|
|
3742-20 |
Female "T" Luer Fitting (pkg 20) |
|
|
|
|
|
|
3955 |
EKV Cartridges, 35 mm (pkg of 12) |
|
|
|
|
|
|
3960 |
EKC Cartridges, 58 mm (pkg of 12) |
|
|
|
|
|
|
3993 |
Electrode Adapter (for electrodes with 2mm pins) |
|
|
|
|
|
|
3B120F-4 |
Glass, Three-Barrel, 1.2 mm x 4" (102 mm), Fil, Pkg/100 |
|
|
|
|
|
|
3B120F-6 |
Glass, Three-Barrel, 1.2 mm x 6" (152 mm), Fil, Pkg/100 |
|
|
|
|
|
|
4038-10 |
1-Way Stopcock Luer Lock, Pack of 10 |
|
|
|
|
|
|
40500 |
RS-232 Cable, 9-pin “D” connector |
|
|
|
|
|
|
47024 |
Tissue Bath (25ml volume) |
|
|
|
|
|
|
47025 |
Tissue Bath (10ml volume) |
|
|
|
|
|
|
47026 |
Tissue Bath (50ml volume) |
|
|
|
|
|
|
47030 |
Tissue Holder AS, Atria with stimulation (standard) |
|
|
|
|
|
|
47040 |
Tissue Holder V, Vascular (standard) |
|
|
|
|
|
|
47050 |
Tissue Holder VS, Vascular with stimulation (standard) |
|
|
|
|
|
|
47060 |
Tissue Holder B, Blank with stimulation (standard) |
|
|
|
|
|
|
47070 |
Tissue Holder MH, Microtissue strips (optional) |
|
|
|
|
|
|
47075 |
Tissue Holder MHS1, Microtissue strips with stimulation (optional) |
|
|
|
|
|
|
47110 |
Tissue Holder MV100, Microvessels (optional) |
|
|
|
|
|
|
47120 |
Tissue Holder MVS100 (optional) |
|
|
|
|
|
|
47127 |
Tissue Bath (2ml volume) |
|
|
|
|
|
|
47128 |
Tissue Bath (5ml volume) |
|
|
|
|
|
|
47130 |
Tissue Holder MVS200 (optional) |
|
|
|
|
|
|
47230 |
Atria Holder with Stimulation |
|
|
|
|
|
|
47240 |
Vascular Holder |
|
|
|
|
|
|
47245 |
Mini Vessel Holder |
|
|
|
|
|
|
47250 |
Vascular Holder with Simulation |
|
|
|
|
|
|
47255 |
Mini Vessel Holder with Stimulation, Size 1 |
|
|
|
|
|
|
47256 |
Mini Vessel Holder with Stimulation, Size 2 |
|
|
|
|
|
|
47260 |
Blank Holder with Simulation |
|
|
|
|
|
|
47270 |
Mini Tissue Strip Holder |
|
|
|
|
|
|
47275 |
Mini Strip-tissue Holder with Stimulation |
|
|
|
|
|
|
47610 |
FORT-100 Transducer and Adapter Sleeve (standard) |
|
|
|
|
|
|
48000 |
SYSTEM 48000 MICROBEVELER |
|
|
|
|
|
|
48014-03 |
FILM,LAPPING .1u DIAMOND 3 PK |
|
|
|
|
|
|
48014-05 |
FILM,LAPPING .5u DIAMOND 3 PK |
|
|
|
|
|
|
48014-10 |
FILM,LAPPING 1u DIAMOND 3 PK |
|
|
|
|
|
|
48014-30 |
FILM,LAPPING 3u DIAMOND 3 PK |
|
|
|
|
|
|
48015-03 |
FILM,LAPPING .3u ALUMINA 50PK |
|
|
|
|
|
|
48015-10 |
FILM,LAPPING 1u ALUMINA 50 PK |
|
|
|
|
|
|
48015-30 |
FILM,LAPPING 3u ALUMINA 50 PK |
|
|
|
|
|
|
48025 |
Fiber Optic Cable & Holder for FOIMPH |
|
|
|
|
|
|
48200 |
PZM Tool Holder |
|
|
|
|
|
|
48300 |
PZMIII Tilt Base Assembly |
|
|
|
|
|
|
4878 |
Replacement 3.5" glass capillaries (300) |
|
|
|
|
|
|
4879 |
Replacement 7" glass capillaries (300) |
|
|
|
|
|
|
4886 |
Scotch-Weld 2216 (2 oz.) |
|
|
|
|
|
|
4898 |
Silver Epoxy (1 oz.) |
|
|
|
|
|
|
500023 |
Olsen-Hegar Needle Holder with Suture Scissors, 14cm, serrated jaws |
|
|
|
|
|
|
500023-G |
Olsen-Hegar Needle Holder with Suture Scissors, 14cm, serrated jaws (G) |
|
|
|
|
|
|
500028 |
ADAPTER,VIDEO,ADJUSTABLE,PZMT |
|
|
|
|
|
|
500046 |
Supercut Scissors, 30°angle to side, 10cm |
|
|
|
|
|
|
500047 |
Scissors, 30°angle to side, 14cm, sharp/sharp |
|
|
|
|
|
|
500047-G |
Scissors, 30°angle to side, 14cm, sharp/sharp (G) |
|
|
|
|
|
|
500064 |
Tweezer, Dumont #3C, Dumostar, Biology, non-magnetic, non-corrosive,
11cm, 0.08 x 0.04mm tip |
|
|
|
|
|
|
500075 |
Ear Punch, 2mm diameter, 5cm long |
|
|
|
|
|
|
500076 |
Ear Punch, 1mm diameter, 10cm long |
|
|
|
|
|
|
500077 |
Ear Punch, 2mm diameter, 10cm long |
|
|
|
|
|
|
500079 |
Corneoscleral Punch, 8cm, 2mm wide |
|
|
|
|
|
|
500081 |
Adapter IBM PC Comm Port, DB9 (male), DB9 (female) |
|
|
|
|
|
|
500082 |
Adapter BNC/RCA MM, BNC (female), RCA (male) |
|
|
|
|
|
|
500085 |
Tweezer, Dumont #5, Dumostar, Medical Biology, non-magnetic,
non-corrosive, 12cm, 0.025 x 0.015mm |
|
|
|
|
|
|
500086 |
Vannas Scissors, 8.5cm, straight 7mm blade, 0.025 x 0.015 mm tip, ultra
fine |
|
|
|
|
|
|
500087 |
Silver clip, Micro Vascular 0.5 x 0.8mm, 100/box |
|
|
|
|
|
|
500087-G |
Silver clip, Micro Vascular 0.5 x 0.8mm, 100/box (G) |
|
|
|
|
|
|
500088 |
Applying Forceps for Silver Clips (# 500087), 18cm |
|
|
|
|
|
|
500088-G |
Applying Forceps for Silver Clips (# 500087), 18cm (G) |
|
|
|
|
|
|
500092 |
Adson Forceps, 12 cm, 1 x 2 teeth |
|
|
|
|
|
|
500092-G |
Adson Forceps, 12 cm, 1 x 2 teeth (G) |
|
|
|
|
|
|
500121 |
Dry Sterilizer, 220V |
|
|
|
|
|
|
500126 |
Surgical Instrument Lubricant (8 fl oz) |
|
|
|
|
|
|
500128 |
BNC Zero Ohm Terminator, BNC (male) |
|
|
|
|
|
|
500131 |
Cable for Biode® Snap Electrodes, 2 mm pin, snap, 5 ft (1.5 m), Pkg/5 |
|
|
|
|
|
|
500133 |
Tungsten dissecting probe, 5cm, 0.125mm diameter rod |
|
|
|
|
|
|
500134 |
Tungsten dissecting probe, 5cm, 0.25mm diameter rod |
|
|
|
|
|
|
500135 |
Tungsten dissecting probe, 5cm, 0.5mm diameter rod |
|
|
|
|
|
|
500137 |
Cuticle nipper with ring handles, 11cm, angle |
|
|
|
|
|
|
500137-G |
Cuticle nipper with ring handles, 11cm, angle (G) |
|
|
|
|
|
|
500143 |
Corneoscleral Punch, 8cm, 1.5mm wide |
|
|
|
|
|
|
500162 |
Replacement Lamp, 12V, 100W |
|
|
|
|
|
|
500168 |
4-Way Switchbox |
|
|
|
|
|
|
500177 |
Adson-Brown Forceps, Tungsten Carbide, 12 cm, 7 x 7 side grasping teeth |
|
|
|
|
|
|
500177-G |
Adson-Brown Forceps, Tungsten Carbide, 12 cm, 7 x 7 side grasping teeth
(G) |
|
|
|
|
|
|
500178 |
Adson Forceps, Tungsten Carbide, 12cm, 1 x 2 teeth |
|
|
|
|
|
|
500178-G |
Adson Forceps, Tungsten Carbide, 12cm, 1 x 2 teeth (G) |
|
|
|
|
|
|
500184 |
Standard BNC Cable (male-male), 10ft (3 m) |
|
|
|
|
|
|
500186 |
Bifurcated Light Guide (with lenses) |
|
|
|
|
|
|
500191 |
Universal Pipetter Tips, 0.1-10 µl (bulk 1000) |
|
|
|
|
|
|
500192 |
Universal Pipetter Tips, 0.1-10 µl (10 racks of 96) |
|
|
|
|
|
|
500193 |
Universal Pipetter Tips, 5-200 µl (bulk 1000) |
|
|
|
|
|
|
500194 |
Universal Pipetter Tips, 5-200 µl (10 racks of 96) |
|
|
|
|
|
|
500195 |
Universal Pipetter Tips, 100-1000 µl (bulk 1000) |
|
|
|
|
|
|
500196 |
Universal Pipetter Tips, 100-1000 µl (10 racks of 100) |
|
|
|
|
|
|
500197 |
Universal Pipetter Tips, 500-5000 µl (bulk 250) |
|
|
|
|
|
|
500198 |
Universal Pipetter Tips, 500-5000 µl (10 racks of 50) |
|
|
|
|
|
|
500199 |
Universal Pipetter Tips, 0.1-10 µl (10 racks of 96) |
|
|
|
|
|
|
500200 |
Universal Pipetter Tips, 10-200 µl (10 racks of 96) |
|
|
|
|
|
|
500201 |
Universal Pipetter Tips, 100-1000 µl (10 racks of 100) |
|
|
|
|
|
|
500202 |
Universal Pipetter Tips, 0.1-10 µl (rack of 200) |
|
|
|
|
|
|
500203 |
Universal Pipetter Tips, 0.1-10 µl (rack of 200) |
|
|
|
|
|
|
500204 |
Universal Pipetter Tips, 0.1-10 µl (rack of 200) |
|
|
|
|
|
|
500205 |
Universal Pipetter Tips, 0.5-200 µl (bulk 1000) |
|
|
|
|
|
|
500206 |
Universal Pipetter Tips, 0.5-200 µl (rack of 200) |
|
|
|
|
|
|
500207 |
Universal Pipetter Tips, 0.5-200 µl (rack of 200) |
|
|
|
|
|
|
500216 |
Iris Scissors, Tungsten Carbide, 11cm, straight |
|
|
|
|
|
|
500216-G |
Iris Scissors, Tungsten Carbide, 11cm, straight (G) |
|
|
|
|
|
|
500217 |
Iris Scissors, Tungsten Carbide, 11cm, curved |
|
|
|
|
|
|
500217-G |
Iris Scissors, Tungsten Carbide, 11cm, curved (G) |
|
|
|
|
|
|
500218 |
Scissors, Mayo, Tungsten Carbide, 14cm, straight |
|
|
|
|
|
|
500218-G |
Scissors, Mayo, Tungsten Carbide, 14cm, straight (G) |
|
|
|
|
|
|
500219 |
Scissors, Mayo, Tungsten Carbide, 14cm, curved |
|
|
|
|
|
|
500219-G |
Scissors, Mayo, Tungsten Carbide, 14cm, curved (G) |
|
|
|
|
|
|
500220 |
Scissors, Mayo, Tungsten Carbide, 17.5cm, straight |
|
|
|
|
|
|
500220-G |
Scissors, Mayo, Tungsten Carbide, 17.5cm, straight (G) |
|
|
|
|
|
|
500221 |
Scissors, Mayo, Tungsten Carbide, 17.5cm, curved |
|
|
|
|
|
|
500221-G |
Scissors, Mayo, Tungsten Carbide, 17.5cm, curved (G) |
|
|
|
|
|
|
500222 |
Adson Forceps, Tungsten Carbide, 12 cm, serrated tip |
|
|
|
|
|
|
500222-G |
Adson Forceps, Tungsten Carbide, 12 cm, serrated tip (G) |
|
|
|
|
|
|
500223 |
Castroviejo Needle Holder, Tungsten Carbide, 14 cm, straight serrated
jaws with lock |
|
|
|
|
|
|
500223-G |
Castroviejo Needle Holder, Tungsten Carbide, 14 cm, straight serrated
jaws with lock (G) |
|
|
|
|
|
|
500224 |
Crilewood Needle Holder, 14.5cm, serrated tungsten carbide jaws |
|
|
|
|
|
|
500224-G |
Crilewood Needle Holder, 14.5cm, serrated tungsten carbide jaws (G) |
|
|
|
|
|
|
500225 |
Mathieu Fine Needle Holder, 14cm, serrated tungsten carbide jaws |
|
|
|
|
|
|
500225-G |
Mathieu Fine Needle Holder, 14cm, serrated tungsten carbide jaws (G) |
|
|
|
|
|
|
500226 |
Ryder Needle Holder, 13 cm, serrated tungsten carbide jaws |
|
|
|
|
|
|
500226-G |
Ryder Needle Holder, 13 cm, serrated tungsten carbide jaws (G) |
|
|
|
|
|
|
500227 |
Olsen Hegar Needle Holder with suture scissors, 14cm, serrated tungsten
carbide jaws |
|
|
|
|
|
|
500227-G |
Olsen Hegar Needle Holder with suture scissors, 14cm, serrated tungsten
carbide jaws (G) |
|
|
|
|
|
|
500228 |
Noyes Scissors, 12cm, 15mm blades, sharp/sharp tip |
|
|
|
|
|
|
500228-G |
Noyes Scissors, 12cm, 15mm blades, sharp/sharp tip (G) |
|
|
|
|
|
|
500229 |
Tweezer, Dumont #1, Stainless steel, Medical Biology, 12cm, 0.10 x 0.06
mm tips |
|
|
|
|
|
|
500230 |
Tweezer, Dumont #2, Stainless steel, Medical Biology, 12cm, 0.17 x 0.07
mm tips |
|
|
|
|
|
|
500231 |
Tweezer, Dumont #4, Stainless steel, Medical Biology, 11cm, 0.02 x 0.06
mm Mod tips |
|
|
|
|
|
|
500232 |
Tweezer, Dumont #5, Stainless steel, Medical Biology, 11cm, 0.02 x 0.06
mm half curved tips |
|
|
|
|
|
|
500233 |
Tweezer, Dumont #5, Dumostar, non-magnetic, non-corrosive, 11cm, 0.10 x
0.06 mm tips |
|
|
|
|
|
|
500234 |
Tweezer, Dumont, #5B, Inox, Biology, 11cm, 45°bent, 0.05 x 0.01 mm tips |
|
|
|
|
|
|
500235 |
Tweezer, Dumont #55, Dumostar, non-magnetic, non-corrosive, 11cm, 0.05 x
0.01 mm tips |
|
|
|
|
|
|
500236 |
Scalpel Handle #3, stainless steel, 13cm |
|
|
|
|
|
|
500236-G |
Scalpel Handle #3, stainless steel, 13cm (G) |
|
|
|
|
|
|
500237 |
Scalpel Handle #4, stainless steel, 14cm |
|
|
|
|
|
|
500237-G |
Scalpel Handle #4, stainless steel, 14cm (G) |
|
|
|
|
|
|
500238 |
Scalpel Handle #7, stainless steel, 16cm |
|
|
|
|
|
|
500238-G |
Scalpel Handle #7, stainless steel, 16cm (G) |
|
|
|
|
|
|
500239 |
Scalpel Blades #10, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500240 |
Scalpel Blades #11, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500241 |
Scalpel Blades #12, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500242 |
Scalpel Blades #15, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500243 |
Scalpel Blades #20, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500244 |
Scalpel Blades #21, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500245 |
Scalpel Blades #22, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500246 |
Scalpel Blades #23, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500247 |
Scalpel Blades #24, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500248 |
Scalpel Blades #25, stainless steel, sterile, 100pcs/box |
|
|
|
|
|
|
500249 |
Microsurgical knife, stainless steel, 13.5cm, 15°5mm blade, sterile,
6pcs/box |
|
|
|
|
|
|
500250 |
Roundstock Ophthalmic knife, stainless steel, 13.5cm, 15°5.7mm blade,
sterile, 6pcs/box |
|
|
|
|
|
|
500252 |
Sterilizer Tray, 6 x 2.5 x 0.75", Base, Silicone Mat, Lid |
|
|
|
|
|
|
500253 |
Sterilizer Tray, 7.5 x 4 x 0.75", Base, Silicone Mat, Lid |
|
|
|
|
|
|
500254 |
Sterilizer Tray, 10 x 6 x 0.75", Base, Silicone Mat, Lid |
|
|
|
|
|
|
500255 |
Silicone Mat, 15 x 10" |
|
|
|
|
|
|
500256 |
BNC Right Angle Adapter |
|
|
|
|
|
|
500257 |
Standard BNC Cable (male-male), 6" (15 cm) |
|
|
|
|
|
|
500258 |
Standard BNC Cable (male-male), 12" (30 cm) |
|
|
|
|
|
|
500259 |
Standard BNC Cable (male-male), 18" (46 cm) |
|
|
|
|
|
|
500260 |
Vannas Scissors, 8cm, 45°angled-to-side 5mm blade, 0.1mm tip |
|
|
|
|
|
|
500260-G |
Vannas Scissors, 8cm, 45°angled-to-side 5mm blade, 0.1mm tip (G) |
|
|
|
|
|
|
500261 |
0.3x CCD Camera Coupler, C-mount |
|
|
|
|
|
|
500262 |
0.5x CCD Camera Coupler, C-mount |
|
|
|
|
|
|
500263 |
0.75x CCD Camera Coupler, C-mount |
|
|
|
|
|
|
500280 |
Octyl cyanoacrylate adhesive, 1.5g |
|
|
|
|
|
|
500282 |
Mityflex Peristaltic Pump (110 V) |
|
|
|
|
|
|
500283 |
Mityflex Peristaltic Pump (220 V) |
|
|
|
|
|
|
500291 |
Peri-Star Peristaltic Pump, 2-channel, 0.1-80ml/min (110V) |
|
|
|
|
|
|
500292 |
Optional Eyepieces (15x) for H600 Series Microscopes (pair) |
|
|
|
|
|
|
500299 |
Pistons, 5-pack |
|
|
|
|
|
|
500313 |
Sapphire Blade, single edge, 1mm, 30° |
|
|
|
|
|
|
500314 |
Sapphire Blade, double edge lance, 1mm, 35° |
|
|
|
|
|
|
500315 |
Sapphire Blade, single edge, 2mm, 30° |
|
|
|
|
|
|
500316 |
Sapphire Blade, double edge lance, 2mm, 60° |
|
|
|
|
|
|
500317 |
Sapphire knife handle, retractable, stainless steel, 13cm |
|
|
|
|
|
|
500325 |
Sapphire Blade, single edge, 1.4mm wide, 35° |
|
|
|
|
|
|
500326 |
Sapphire Blade, double edge lance, 1.7mm wide, 60° |
|
|
|
|
|
|
500329 |
25x Long-Working Distance Objective, 5mm/0.50 |
|
|
|
|
|
|
500330 |
Snap electrode cable (40"), 1.5mm safelead (7 wires) |
|
|
|
|
|
|
500335 |
Tweezer, Dumont #1, Inox, 12cm, 0.20x0.12 mm tips |
|
|
|
|
|
|
500336 |
Tweezer, Dumont #2, Inox, 12cm, 0.34 x 0.14 mm tips |
|
|
|
|
|
|
500337 |
Tweezer, Dumont #3, Dumostar, Biology, non-magnetic, non-corrosive,
12cm, 0.08 x 0.04mm tips |
|
|
|
|
|
|
500338 |
Tweezer, Dumont #3, Inox, 12cm, 0.17 x 0.10 mm tips |
|
|
|
|
|
|
500339 |
Tweezer, Dumont #4, Dumostar, Biology, non-magnetic, non-corrosive,
11cm, 0.06 x 0.02mm tips |
|
|
|
|
|
|
500340 |
Tweezer, Dumont #4, Inox, 11cm, 0.13 x 0.08 mm tips |
|
|
|
|
|
|
500341 |
Tweezer, Dumont #5, Inox, Biology, 11cm, 0.05 x 0.01 mm tips |
|
|
|
|
|
|
500342 |
Tweezer, Dumont #5, Inox, 11cm, 0.10 x 0.06 mm tips |
|
|
|
|
|
|
500343 |
Reflex Clip Applier, 11cm, for 7mm clips only |
|
|
|
|
|
|
500344 |
Reflex Clips, stainless steel, non-sterile, 7mm, for use with 500343,
100/box |
|
|
|
|
|
|
500345 |
Reflex Clip Applier, 11cm, for 9mm clips only |
|
|
|
|
|
|
500346 |
Reflex Clips, stainless steel, non-sterile, 9mm, for use with 500345,
100/box |
|
|
|
|
|
|
500347 |
Reflex clip removing forceps, 12cm, for 7mm and 9mm clips |
|
|
|
|
|
|
500348 |
Disposable Scalpel, #10, sterile, 10/box |
|
|
|
|
|
|
500349 |
Disposable Scalpel, #11, sterile, 10/box |
|
|
|
|
|
|
500350 |
Disposable Scalpel, #12, sterile, 10/box |
|
|
|
|
|
|
500351 |
Disposable Scalpel, #15, sterile, 10/box |
|
|
|
|
|
|
500352 |
Disposable Scalpel, #20, sterile, 10/box |
|
|
|
|
|
|
500353 |
Disposable Scalpel, #21, sterile, 10/box |
|
|
|
|
|
|
500354 |
Disposable Scalpel, #22, sterile, 10/box |
|
|
|
|
|
|
500355 |
Disposable Scalpel, #23, sterile, 10/box |
|
|
|
|
|
|
500356 |
Disposable Scalpel, #24, sterile, 10/box |
|
|
|
|
|
|
500358 |
Liston Bone Cutting Forceps, straight, 19cm |
|
|
|
|
|
|
500362 |
Nail nippers, concave jaws, double spring, 14cm |
|
|
|
|
|
|
500362-G |
Nail nippers, concave jaws, double spring, 14cm (G) |
|
|
|
|
|
|
500363 |
Dressing Forceps, 15.5cm, serrated tip |
|
|
|
|
|
|
500363-G |
Dressing Forceps, 15.5cm, serrated tip (G) |
|
|
|
|
|
|
500364 |
Dressing Forceps, 25.5cm, serrated tip |
|
|
|
|
|
|
500364-G |
Dressing Forceps, 25.5cm, serrated tip (G) |
|
|
|
|
|
|
500365 |
Dressing Forceps, 30.5cm, serrated tip |
|
|
|
|
|
|
500365-G |
Dressing Forceps, 30.5cm, serrated tip (G) |
|
|
|
|
|
|
500366 |
Eye scissors, 10cm, blunt probe points, straight |
|
|
|
|
|
|
500366-G |
Eye scissors, 10cm, blunt probe points, straight (G) |
|
|
|
|
|
|
500367 |
Eye scissors, 10cm, blunt probe points, curved |
|
|
|
|
|
|
500367-G |
Eye scissors, 10cm, blunt probe points, curved (G) |
|
|
|
|
|
|
500368 |
Wire Retractors, 5cm, 15mm wire blades, maximum spread 25mm |
|
|
|
|
|
|
500368-G |
Wire Retractors, 5cm, 15mm wire blades, maximum spread 25mm (G) |
|
|
|
|
|
|
500369 |
Barraquer retractor, 4cm, 10mm wire blades, maximum spread 3 cm |
|
|
|
|
|
|
500369-G |
Barraquer retractor, 4cm, 10mm wire blades, maximum spread 3 cm (G) |
|
|
|
|
|
|
500370 |
Wide Field Binocular Loup, 2.5X, 35~50 cm working distance, lightweight
(72g) |
|
|
|
|
|
|
500372 |
Microintraocular scissors, 14cm, 25°angled blades |
|
|
|
|
|
|
500372-T |
SCISSORS, MICROINTRAOCULAR |
|
|
|
|
|
|
500373 |
Microintraocular forceps, 14cm, 2.5 x 0.3 x 0.25 mm titanium jaws, 1.5mm
max. opening |
|
|
|
|
|
|
500373-T |
FORCEPS, MICROINTRAOCULAR 14cm |
|
|
|
|
|
|
500374 |
Microintraocular scissors, 14cm, 50°angled blades |
|
|
|
|
|
|
500376 |
Microintraocular scissors, 14cm, 90°angled blades |
|
|
|
|
|
|
500377 |
Vessel Cannulation forceps for 0.5mm diameter cannula, 10cm |
|
|
|
|
|
|
500378 |
Scissors, Operating, 18cm, straight, sharp/blunt |
|
|
|
|
|
|
500378-G |
Scissors, Operating, 18cm, straight, sharp/blunt (G) |
|
|
|
|
|
|
500379 |
Scissors, Operating, 18cm, straight, blunt/blunt |
|
|
|
|
|
|
500379-G |
Scissors, Operating, 18cm, straight, blunt/blunt (G) |
|
|
|
|
|
|
500380 |
Ligature scissors, 9cm |
|
|
|
|
|
|
500380-G |
Ligature scissors, 9cm (G) |
|
|
|
|
|
|
500381 |
Biemer scissors, 13cm, straight |
|
|
|
|
|
|
500388 |
Adjustable high-temperature cautery, Fine Tip, 1500-2100°F, sterile,
10/box |
|
|
|
|
|
|
500389 |
High-temperature cautery, 2200°F, two replaceable (AA) batteries &
interchangeable tip |
|
|
|
|
|
|
500390 |
Low Temperature Cautery, 800°F, one replaceable (AA) battery & tip
#500396 |
|
|
|
|
|
|
500391 |
Low Temperature Cautery Kit, 800°F, contains [1] 500390 handle, [2]
500396 tips, & [2] 500395 tips |
|
|
|
|
|
|
500392 |
High Temperature Cautery Kit, 2000°F, contains [1] 500389 handle, [2]
500394 tips, & [2] 500393 tips |
|
|
|
|
|
|
500393 |
Disposable High Temp Loop Tips, 2000°F (for use with #500389 & #500392),
10/box |
|
|
|
|
|
|
500394 |
Disposabel High Temp Fine Tips, 2200°F (for use with #500389 & #500392),
10/box |
|
|
|
|
|
|
500395 |
Disposable Low Temp Elongated Fine Tips, 1100°F (for use with #500390 &
#500391), 10/box |
|
|
|
|
|
|
500396 |
Disposable Low Temp Fine Tips, 1300°F (for use with #500390 & #500391),
10/box |
|
|
|
|
|
|
500397 |
High Frequency Dessicator (110V, 60Hz) |
|
|
|
|
|
|
500421 |
High Frequency Electrosurgical Generator (110V, 60Hz) |
|
|
|
|
|
|
500444 |
Lister Bandage Scissors, 15cm, 4cm blades |
|
|
|
|
|
|
500444-G |
Lister Bandage Scissors, 15cm, 4cm blades (G) |
|
|
|
|
|
|
500445 |
Micro Alligator Scissors, 45°angle, 7cm shaft, 1.5mm blades |
|
|
|
|
|
|
500446 |
Micro Alligator Forceps, 8cm shaft, 0.5 x 4.5 mm serrated jaw |
|
|
|
|
|
|
500446-G |
Micro Alligator Forceps, 8cm shaft, 0.5 x 4.5 mm serrated jaw (G) |
|
|
|
|
|
|
500448 |
Handle for Probe, stainless steel, 11cm |
|
|
|
|
|
|
500449 |
Titanium Flexible Fine Probe, 5cm, <5µ tip, 2/pkg |
|
|
|
|
|
|
500450 |
Titanium Wire Cutter, 15cm, 1.5cm Tungsten Carbide blades, light weight
(60g) |
|
|
|
|
|
|
500451 |
Micro Hemostatic Forceps, 12.5cm, straight, serrated, 0.4 x 0.8 mm tip |
|
|
|
|
|
|
500451-G |
Micro Hemostatic Forceps, 12.5cm, straight, serrated, 0.4 x 0.8 mm tip
(G) |
|
|
|
|
|
|
500452 |
Micro Hemostatic Forceps, 12.5cm, curved, serrated, 0.4 x 0.8 mm tip |
|
|
|
|
|
|
500452-G |
Micro Hemostatic Forceps, 12.5cm, curved, serrated, 0.4 x 0.8 mm tip (G) |
|
|
|
|
|
|
500453 |
Vessel Cannulation Forceps for 1.0mm diameter cannula, 10cm |
|
|
|
|
|
|
500455 |
Filter Forceps, Polypropylene finger grip, 11cm, straight flat jaw |
|
|
|
|
|
|
500456 |
Filter Forceps, 11cm, straight flat jaw |
|
|
|
|
|
|
500456-G |
Filter Forceps, 11cm, straight flat jaw (G) |
|
|
|
|
|
|
500457 |
Filter Forceps, 11cm, bent flat jaw |
|
|
|
|
|
|
500458 |
Straight Dissecting Needles, 14cm, 12/box |
|
|
|
|
|
|
500460 |
Curved Dissecting Needles, 14cm, 12/box |
|
|
|
|
|
|
500462 |
Liston Bone Cutting Forceps, straight, 14cm |
|
|
|
|
|
|
500475 |
Ball Joint, 7cm long for 8mm diameter holder |
|
|
|
|
|
|
500476 |
Ball Joint, 4cm long for 4mm diameter holder |
|
|
|
|
|
|
500778 |
Nanoliter Injector Universal Adapter |
|
|
|
|
|
|
500787 |
Haake DC10-P5/U Circulating Bath (115 V) |
|
|
|
|
|
|
500788 |
Haake DC10-P5/U Circulating Bath (230 V) |
|
|
|
|
|
|
500789 |
Haake DC10-P5/U Circulating Bath (100 V) |
|
|
|
|
|
|
500801 |
Filters for E5000, 5 pk |
|
|
|
|
|
|
500811 |
Trinocular Head |
|
|
|
|
|
|
500812 |
Video (C-Mount) Adapter for 500811 |
|
|
|
|
|
|
500813 |
EYEPIECE TUBE ADPTR FOR 500811 |
|
|
|
|
|
|
500814 |
Photo Tube (T-Mount) Adapter for 500811 |
|
|
|
|
|
|
500815 |
BULB REPL.6V/20W FOR MOD MODEL |
|
|
|
|
|
|
500816 |
Replacement Bulb, Halogen, 12V/30W |
|
|
|
|
|
|
500820-F-xxx-yy |
Flat Center Cooled Stage Insert & Controller |
|
|
|
|
|
|
500821 |
Eyepiece, 15x, wide field, FN11 |
|
|
|
|
|
|
500822 |
Objective, 20x, 0.40 achromatic, brightfield |
|
|
|
|
|
|
500823 |
Objective, 60x, 1.0-0.70 achromatic, oil, brightfield |
|
|
|
|
|
|
500825 |
Teaching Pointer Eyepiece with Eyecup, 10x |
|
|
|
|
|
|
500826 |
Dual-View Teaching Attachment, requires P/N 500825 |
|
|
|
|
|
|
500827 |
Micrometer eyepiece, 1x, 10 mm/div. |
|
|
|
|
|
|
500828 |
Stage Micrometer, reflected light, 1 mm/200div. |
|
|
|
|
|
|
500871 |
Magnetic Ball Joint |
|
|
|
|
|
|
500876 |
6-Place Pipetter Rack |
|
|
|
|
|
|
500877 |
Pette-Clamp, pkg 3 |
|
|
|
|
|
|
500890 |
BARBED TUBING ASSORTMENT |
|
|
|
|
|
|
500895 |
Luer-to-Tubing Coupler Assortment Kit (Nylon) |
|
|
|
|
|
|
501090 |
Adjustable Low Temperature Cautery, Fine Tip, sterile, 700-1200°F,
10/box |
|
|
|
|
|
|
501200 |
Castroviejo Caliper, 20mm scale, 75mm |
|
|
|
|
|
|
501201 |
Dumont #5, Medical, 90°bent, 11cm, 0.05 x 0.01 mm |
|
|
|
|
|
|
501202 |
Dumont #5, Inox, Biology, self-closing, 11cm, 0.05 x 0.01 mm |
|
|
|
|
|
|
501203 |
Dumont #5, Dumoxel, self-closing, 11cm, 0.1 x 0.06 mm |
|
|
|
|
|
|
501204 |
Dumont #6, Medical, Stainless steel, 12cm, 0.17 x 0.1 mm sharp & hooked
points |
|
|
|
|
|
|
501205 |
Dumont #7, Inox, Biology, self-closing, 12cm, 0.07 x 0.03 mm, curved
tips |
|
|
|
|
|
|
501206 |
Dumont #7, Dumoxel, Biology, self-closing, 12 cm, 0.08 x 0.04 mm |
|
|
|
|
|
|
501207 |
Zirconia Forceps, 14cm, 9mm Ceramic straight tips |
|
|
|
|
|
|
501208 |
Forcep, Dumont #3, Dumoxel, 12cm, 0.4 x 0.3 mm self-closing replaceable
Ceramic tips |
|
|
|
|
|
|
501209 |
Forcep, Dumont #3C, Dumoxel, 11cm, 0.4 x 0.3 mm replaceable Ceramic tips |
|
|
|
|
|
|
501210 |
Forcep, Dumont #3, Dumoxel, 13.5cm, 0.4 x 0.3 mm replaceable Ceramic
tips |
|
|
|
|
|
|
501211 |
Micro Crocodile Forceps, 7.5cm shaft, 3mm serrated jaw |
|
|
|
|
|
|
501212 |
Microintraocular forceps, 14cm, 3 x 0.6 x 0.4 mm jaws, 1.4mm max.
opening |
|
|
|
|
|
|
501212-T |
FORCEPS, MICROINTRAOCULAR 14cm |
|
|
|
|
|
|
501213 |
High Frequency Electrosurgical Generator (220V) |
|
|
|
|
|
|
501214 |
High Frequency Dessicator (220V) |
|
|
|
|
|
|
501215 |
Graefe Forceps, 7cm long, serrated, 0.7 mm curved tip |
|
|
|
|
|
|
501215-G |
Graefe Forceps, 7cm long, serrated, 0.7 mm curved tip (G) |
|
|
|
|
|
|
501216 |
Tissue Forceps, 12.5 cm, 1 x 2 teeth, curved tip |
|
|
|
|
|
|
501216-G |
Tissue Forceps, 12.5 cm, 1 x 2 teeth, curved tip (G) |
|
|
|
|
|
|
501217 |
Dressing Forceps, 12.5cm, serrated tip |
|
|
|
|
|
|
501217-G |
Dressing Forceps, 12.5cm, serrated tip (G) |
|
|
|
|
|
|
501218 |
Scissors, Operating, 14cm, straight, sharp/sharp |
|
|
|
|
|
|
501218-G |
Scissors, Operating, 14cm, straight, sharp/sharp (G) |
|
|
|
|
|
|
501219 |
Scissors, Operating, 14cm, straight, blunt/blunt |
|
|
|
|
|
|
501219-G |
Scissors, Operating, 14cm, straight, blunt/blunt (G) |
|
|
|
|
|
|
501220 |
Scissors, Operating, 14cm, curved, sharp/sharp |
|
|
|
|
|
|
501220-G |
Scissors, Operating, 14cm, curved, sharp/sharp (G) |
|
|
|
|
|
|
501221 |
Scissors, Operating, 14cm, curved, sharp/blunt |
|
|
|
|
|
|
501221-G |
Scissors, Operating, 14cm, curved, sharp/blunt (G) |
|
|
|
|
|
|
501222 |
Scissors, Operating, 14cm, curved, blunt/blunt |
|
|
|
|
|
|
501222-G |
Scissors, Operating, 14cm, curved, blunt/blunt (G) |
|
|
|
|
|
|
501223 |
Scissors, Operating, 16cm, straight, sharp/blunt |
|
|
|
|
|
|
501223-G |
Scissors, Operating, 16cm, straight, sharp/blunt (G) |
|
|
|
|
|
|
501224 |
Scissors, Operating, 16cm, straight, blunt/blunt |
|
|
|
|
|
|
501224-G |
Scissors, Operating, 16cm, straight, blunt/blunt (G) |
|
|
|
|
|
|
501225 |
Scissors, Operating, 16cm, straight, sharp/sharp |
|
|
|
|
|
|
501225-G |
Scissors, Operating, 16cm, straight, sharp/sharp (G) |
|
|
|
|
|
|
501226 |
Scissors, Operating, 16cm, curved, sharp/blunt |
|
|
|
|
|
|
501226-G |
Scissors, Operating, 16cm, curved, sharp/blunt (G) |
|
|
|
|
|
|
501227 |
Scissors, Operating, 16cm, curved, blunt/blunt |
|
|
|
|
|
|
501227-G |
Scissors, Operating, 16cm, curved, blunt/blunt (G) |
|
|
|
|
|
|
501228 |
Scissors, Operating, 16cm, curved, sharp/sharp |
|
|
|
|
|
|
501228-G |
Scissors, Operating, 16cm, curved, sharp/sharp (G) |
|
|
|
|
|
|
501229 |
Scissors, Operating, 18cm, curved, sharp/blunt |
|
|
|
|
|
|
501229-G |
Scissors, Operating, 18cm, curved, sharp/blunt (G) |
|
|
|
|
|
|
501230 |
Scissors, Operating, 18cm, curved, blunt/blunt |
|
|
|
|
|
|
501230-G |
Scissors, Operating, 18cm, curved, blunt/blunt (G) |
|
|
|
|
|
|
501231 |
Scissors, Operating, 18cm, curved, sharp/sharp |
|
|
|
|
|
|
501231-G |
Scissors, Operating, 18cm, curved, sharp/sharp (G) |
|
|
|
|
|
|
501232 |
Vannas Scissors, 8.5cm, curved 7mm blade, 0.025 x 0.015 mm tip, ultra
fine |
|
|
|
|
|
|
501233 |
McPherson-Vannas Scissors, 7cm, curved 3mm blade, 0.1mm tip |
|
|
|
|
|
|
501234 |
McPherson-Vannas Scissors, 8cm, curved 5mm blade, 0.1 mm tip |
|
|
|
|
|
|
501234-G |
McPherson-Vannas Scissors, 8cm, curved 5mm blade, 0.1 mm tip (G) |
|
|
|
|
|
|
501235 |
Spring Scissors, 10.5cm, 8mm blades, straight |
|
|
|
|
|
|
501236 |
Noyes Scissors, 12cm, 15mm blade, curved, sharp/sharp tip |
|
|
|
|
|
|
501236-G |
Noyes Scissors, 12cm, 15mm blade, curved, sharp/sharp tip (G) |
|
|
|
|
|
|
501237 |
Noyes Scissors, 14cm, 20mm blade, straight, sharp/sharp tip |
|
|
|
|
|
|
501238 |
Noyes Scissors, 14cm, 20mm blade, curved, sharp/sharp tip |
|
|
|
|
|
|
501239 |
DeBakey Forceps, 15cm, delicate, jaw width 1.5 mm |
|
|
|
|
|
|
501239-G |
DeBakey Forceps, 15cm, delicate, jaw width 1.5 mm (G) |
|
|
|
|
|
|
501240 |
Mixter Hemostatic Forceps, "Baby", 14cm, right angle |
|
|
|
|
|
|
501240-G |
Mixter Hemostatic Forceps, "Baby", 14cm, right angle (G) |
|
|
|
|
|
|
501241 |
Kelly Hemostatic Forceps, 14cm, straight |
|
|
|
|
|
|
501241-G |
Kelly Hemostatic Forceps, 14cm, straight (G) |
|
|
|
|
|
|
501242 |
Crile Hemostatic Forceps, 14cm, straight |
|
|
|
|
|
|
501242-G |
Crile Hemostatic Forceps, 14cm, straight (G) |
|
|
|
|
|
|
501243 |
Rochester-Carmalt Hemostatic Forceps, 16cm, curved |
|
|
|
|
|
|
501243-G |
Rochester-Carmalt Hemostatic Forceps, 16cm, curved (G) |
|
|
|
|
|
|
501244 |
Micro Adson Tissue Forceps, 12cm, 1 x 2 teeth, 0.8 mm fine point tip |
|
|
|
|
|
|
501244-G |
Micro Adson Tissue Forceps, 12cm, 1 x 2 teeth, 0.8 mm fine point tip (G) |
|
|
|
|
|
|
501245 |
Micro Adson Dressing Forceps, 12cm, serrated, fine point tip |
|
|
|
|
|
|
501245-G |
Micro Adson Dressing Forceps, 12cm, serrated, fine point tip (G) |
|
|
|
|
|
|
501246 |
Derf Needle Holder, 12cm |
|
|
|
|
|
|
501246-G |
Derf Needle Holder, 12cm (G) |
|
|
|
|
|
|
501247 |
Round Knurled Blade Handle, stainless steel, 10cm |
|
|
|
|
|
|
501247-G |
Round Knurled Blade Handle, stainless steel, 10cm (G) |
|
|
|
|
|
|
501248 |
Hex Blade Handle, stainless steel, 10cm |
|
|
|
|
|
|
501248-G |
Hex Blade Handle, stainless steel, 10cm (G) |
|
|
|
|
|
|
501249 |
Needle Blades, pkg 6 |
|
|
|
|
|
|
501250 |
Miniature Edged Blades, curved tip, pkg 12 |
|
|
|
|
|
|
501251 |
Miniature Edged Blades, round tip, pkg 12 |
|
|
|
|
|
|
501252 |
Scissors, Metzenbaum, 14.5cm, straight |
|
|
|
|
|
|
501252-G |
Scissors, Metzenbaum, 14.5cm, straight (G) |
|
|
|
|
|
|
501253 |
Scissors, Metzenbaum, 14.5cm, curved |
|
|
|
|
|
|
501253-G |
Scissors, Metzenbaum, 14.5cm, curved (G) |
|
|
|
|
|
|
501254 |
Scissors, Metzenbaum, 17.5cm, straight |
|
|
|
|
|
|
501254-G |
Scissors, Metzenbaum, 17.5cm, straight (G) |
|
|
|
|
|
|
501255 |
Scissors, Metzenbaum, 17.5cm, curved |
|
|
|
|
|
|
501255-G |
Scissors, Metzenbaum, 17.5cm, curved (G) |
|
|
|
|
|
|
501256 |
Ceramic Scissors, 14cm, 2" ceramic blades, straight |
|
|
|
|
|
|
501259 |
SCISSORS, SUPERCUT MAYO, TC |
|
|
|
|
|
|
501259-G |
SuperCut Scissors, Mayo, Tungsten Carbide, 17cm, straight (G) |
|
|
|
|
|
|
501260 |
SCISSORS, SUPERCUT MAYO, TC |
|
|
|
|
|
|
501260-G |
SuperCut Scissors, Mayo, Tungsten Carbide, 17cm, curved (G) |
|
|
|
|
|
|
501261 |
SCISSORS, SUPERCUT METZ, TC |
|
|
|
|
|
|
501261-G |
Scissors, Metzenbaum, SuperCut, Tungsten Carbide, 15cm, curved |
|
|
|
|
|
|
501262 |
SCISSORS, SUPERCUT METZ, TC |
|
|
|
|
|
|
501262-G |
Scissors, Metzenbaum, SuperCut, Tungsten Carbide, 18cm, curved |
|
|
|
|
|
|
501263 |
SCISSORS, SUPERCUT IRIS, TC |
|
|
|
|
|
|
501263-G |
Scissors, Iris, Tungsten Carbide, Supercut, 11cm, straight (G) |
|
|
|
|
|
|
501264 |
SCISSORS, SUPERCUT IRIS, TC |
|
|
|
|
|
|
501264-G |
Scissors, Iris, Tungsten Carbide, Supercut, 11cm, curved (G) |
|
|
|
|
|
|
501265 |
Gillies Dissecting Forceps, Tungsten Carbide, 15.5cm, 1 x 2 teeth |
|
|
|
|
|
|
501265-G |
Gillies Dissecting Forceps, Tungsten Carbide, 15.5cm, 1 x 2 teeth (G) |
|
|
|
|
|
|
501266 |
Gillies Dissecting Forceps, 15.5cm, 1 x 2 teeth |
|
|
|
|
|
|
501266-G |
Gillies Dissecting Forceps, 15.5cm, 1 x 2 teeth (G) |
|
|
|
|
|
|
501267 |
McIndoe Dressing Forceps, Tungsten Carbide, 15.5cm, serrated tip |
|
|
|
|
|
|
501267-G |
McIndoe Dressing Forceps, Tungsten Carbide, 15.5cm, serrated tip (G) |
|
|
|
|
|
|
501268 |
McIndoe Dressing Forceps, 15.5cm, serrated tip |
|
|
|
|
|
|
501268-G |
McIndoe Dressing Forceps, 15.5cm, serrated tip (G) |
|
|
|
|
|
|
501269 |
Malleus Nipper, 11cm, 9mm serrated blade |
|
|
|
|
|
|
501273 |
Handpiece for electrodes, 1.6mm diameter shaft |
|
|
|
|
|
|
501274 |
Electrosurgical Unit, 110 V |
|
|
|
|
|
|
501275 |
Indifference Plate |
|
|
|
|
|
|
501277 |
Footswitch |
|
|
|
|
|
|
501278 |
Diamond Shape Loop Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501279 |
Small Loop Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501280 |
Large Loop Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501281 |
Fine Wire Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501282 |
Wire Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501283 |
Small Oval Loop electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501284 |
Ball Electrode, 1.6mm diameter shaft |
|
|
|
|
|
|
501285 |
Electrosurgery Unit, 220V |
|
|
|
|
|
|
501286 |
Set of 7 electrodes |
|
|
|
|
|
|
501287 |
Rochester-Carmalt Hemostatic Forceps, 16cm, straight |
|
|
|
|
|
|
501287-G |
Rochester-Carmalt Hemostatic Forceps, 16cm, straight (G) |
|
|
|
|
|
|
501288 |
Kelly Hemostatic Forceps, 14cm, curved |
|
|
|
|
|
|
501288-G |
Kelly Hemostatic Forceps, 14cm, curved (G) |
|
|
|
|
|
|
501289 |
Snook Ovariectomy Hook, 16cm |
|
|
|
|
|
|
501291 |
Mosquito Hemostatic Forceps, 9cm, 3.5", curved |
|
|
|
|
|
|
501291-G |
Mosquito Hemostatic Forceps, 9cm, 3.5", curved (G) |
|
|
|
|
|
|
501292 |
Thermal Cautery Unit, 110V |
|
|
|
|
|
|
501293 |
Thermal Cautery Unit, 220V |
|
|
|
|
|
|
501294 |
Cautery Handpiece for 501292 & 501293 |
|
|
|
|
|
|
501295 |
Loop Tip |
|
|
|
|
|
|
501296 |
Fine Tip-Flat |
|
|
|
|
|
|
501297 |
Loop Tip-Angled |
|
|
|
|
|
|
501298 |
Ball Point |
|
|
|
|
|
|
501299 |
Fine Tip |
|
|
|
|
|
|
501300 |
Wall Bracket for 501292 & 501293 |
|
|
|
|
|
|
501301 |
Handle for Probe, stainless steel, 7cm |
|
|
|
|
|
|
501302 |
Dumont #7, stainless steel, 11cm, 0.07 x 0.03mm curved, serrated tips |
|
|
|
|
|
|
501303 |
Wafer Handling Forceps, 11cm, angled 30°jaw |
|
|
|
|
|
|
501304 |
Sapphire Blade, single edge, 1mm wide, 40° |
|
|
|
|
|
|
501312 |
Olsen-Hegar Needle Holder with suture scissors, 12cm, serrated tungsten
carbide jaws |
|
|
|
|
|
|
501313 |
Probe, stainless steel, 14cm, 0.5mm diameter |
|
|
|
|
|
|
501314 |
Weitlaner Retractor, self-retaining, 4", 2x3 prongs, sharp |
|
|
|
|
|
|
501314-G |
Weitlaner Retractor, self-retaining, 4", 2x3 prongs, sharp (G) |
|
|
|
|
|
|
501316 |
Tungsten Dissecting Probe, 5cm, 0.125mm diameter rod |
|
|
|
|
|
|
501317 |
Tungsten Dissecting Probe, 5cm, 0.25mm diameter rod |
|
|
|
|
|
|
501318 |
Tungsten Dissecting Probe, 5cm, 0.5mm diameter rod |
|
|
|
|
|
|
501319 |
Instrument Storage Portfolio |
|
|
|
|
|
|
501320 |
Backhaus Towel Clamp, 3.5" |
|
|
|
|
|
|
501320-G |
Backhaus Towel Clamp, 3.5" (G) |
|
|
|
|
|
|
501321 |
Roger Wirecutting Scissors, 12cm long notched blade |
|
|
|
|
|
|
501321-G |
Roger Wirecutting Scissors, 12cm long notched blade (G) |
|
|
|
|
|
|
501322 |
Utility Scissor, 5.5" |
|
|
|
|
|
|
501322-G |
Utility Scissor, 5.5" (G) |
|
|
|
|
|
|
501324 |
Allis Tissue Forceps, 6", 4 x 5 teeth |
|
|
|
|
|
|
501324-G |
Allis Tissue Forceps, 6", 4 x 5 teeth (G) |
|
|
|
|
|
|
501325 |
Rochester-Pean Hemostatic Forceps, 16cm, straight |
|
|
|
|
|
|
501325-G |
Rochester-Pean Hemostatic Forceps, 16cm, straight (G) |
|
|
|
|
|
|
501326 |
Rochester-Oschner Hemostatic Forceps, 16cm, straight |
|
|
|
|
|
|
501326-G |
Rochester-Oschner Hemostatic Forceps, 16cm, straight (G) |
|
|
|
|
|
|
501327 |
Senn Retractor, 7", sharp |
|
|
|
|
|
|
501327-G |
Senn Retractor, 7", sharp (G) |
|
|
|
|
|
|
501328 |
Weitlaner Retractor, self-retaining, 4", 2x3 prongs, blunt |
|
|
|
|
|
|
501328-G |
Weitlaner Retractor, self-retaining, 4", 2x3 prongs, blunt (G) |
|
|
|
|
|
|
501329 |
Gelpi Retractor, 3.5" |
|
|
|
|
|
|
501330 |
US Army Retractor, set of 2 |
|
|
|
|
|
|
501330-G |
US Army Retractor, set of 2 (G) |
|
|
|
|
|
|
501331 |
4x Binocular Loupe |
|
|
|
|
|
|
501332 |
Rongeur, MicroFriedman, 16cm long, jaw width 0.8mm |
|
|
|
|
|
|
501333 |
Rongeur, MicroFriedman, 16cm long, jaw width 1.0mm |
|
|
|
|
|
|
501335 |
Blade Safe Surgical Blade Remover |
|
|
|
|
|
|
501336 |
Student Dissecting Kit |
|
|
|
|
|
|
501337 |
Disposable Safety Scalpels, Size #10, pkg 10 |
|
|
|
|
|
|
501338 |
Disposable Safety Scalpels, Size #11, pkg 10 |
|
|
|
|
|
|
501339 |
Disposable Safety Scalpels, Size #15, pkg 10 |
|
|
|
|
|
|
501340 |
Tip Protectors, Assorted Pack |
|
|
|
|
|
|
501341 |
Tip Protectors, Size 1, 1.6mm x 19mm, White, Pkg 50 |
|
|
|
|
|
|
501342 |
Tip Protectors, Size 2, 2mm x 19mm, Blue, Pkg 50 |
|
|
|
|
|
|
501343 |
Tip Protectors, Size 3, 2.8mm x 19mm, Green, Pkg 50 |
|
|
|
|
|
|
501344 |
Tip Protectors, Size 4, 3.2mm x 25.4mm, Red, Pkg 50 |
|
|
|
|
|
|
501345 |
Tip Protectors, Size 5, 4.8mm x 25.4mm, Yellow, Pkg 50 |
|
|
|
|
|
|
501346 |
Tip Protectors, Size 6, 10.3mm x 19mm, Maroon, Pkg 50 |
|
|
|
|
|
|
501347 |
Tip Protectors, Size 7, 1.6mm x 9.5mm x 25.4mm, Orange, Pkg 50 |
|
|
|
|
|
|
501348 |
Tip Protectors, Size 8, 2mm x 16mm x 25.4mm, Brown, Pkg 50 |
|
|
|
|
|
|
501349 |
Tip Protectors, Size 9, 3.2mm x 25.4mm x 25.4mm, Black, Pkg 50 |
|
|
|
|
|
|
501352 |
PZMIII Binocular Body, pair of 10x eyepieces & eyeguards |
|
|
|
|
|
|
501353 |
Post Stand with 76mm Focus Mount |
|
|
|
|
|
|
501367 |
Universal Focus Mount, 83mm ID for PZM Body |
|
|
|
|
|
|
501369 |
Wide Field 10x Eyepieces (pair) |
|
|
|
|
|
|
501370 |
Wide Field 15x Eyepieces (pair) |
|
|
|
|
|
|
501371 |
Wide Field 20x Eyepieces (pair) |
|
|
|
|
|
|
501372 |
Wide Field 25x Eyepieces (pair) |
|
|
|
|
|
|
501373 |
0.3x Long Working Distance Objective Lens |
|
|
|
|
|
|
501375 |
0.5x Long Working Distance Objective Lens |
|
|
|
|
|
|
501376 |
0.75x Long Working Distance Objective Lens |
|
|
|
|
|
|
501377 |
1.5x Long Working Distance Objective Lens |
|
|
|
|
|
|
501378 |
2.0x Long Working Distance Objective Lens |
|
|
|
|
|
|
501379 |
PZMTIII Trinocular Body, pair of 10x eyepieces & eyeguards |
|
|
|
|
|
|
501381 |
0.5x C-Mount CCD Camera Coupler |
|
|
|
|
|
|
501384 |
Digital Camera Adapter Kit |
|
|
|
|
|
|
501601 |
Digital Caliper |
|
|
|
|
|
|
501603 |
Black Cuvette Cover (optional) |
|
|
|
|
|
|
501607 |
Cable for MS314 and DC3001 |
|
|
|
|
|
|
501608 |
Tripod Stand for BAT-12 |
|
|
|
|
|
|
501609 |
Waveguide Cleaning Kit |
|
|
|
|
|
|
501610 |
Magnetic Stirrer |
|
|
|
|
|
|
501622 |
Universal Micromanipulator Stand (30cm high) |
|
|
|
|
|
|
501623 |
Universal Micromanipulator Stand (45cm high) |
|
|
|
|
|
|
501624 |
Optional Rotation Clamp |
|
|
|
|
|
|
501629 |
Inspection Microscope, integrally mounted |
|
|
|
|
|
|
501630 |
Cold Light Source, integrally mounted |
|
|
|
|
|
|
501631 |
Ceramic Blades, (pkg 5) |
|
|
|
|
|
|
501632 |
New Stainless Steel Blades (pkg 50) |
|
|
|
|
|
|
501634 |
Magnifying Glass, integrally mounted |
|
|
|
|
|
|
501635 |
Professional Quality Screwdriver Set |
|
|
|
|
|
|
501636 |
Video Adapter with "C" Mount (requires 501637) |
|
|
|
|
|
|
501637 |
Beam Splitter |
|
|
|
|
|
|
501638 |
Objective Lens F250 |
|
|
|
|
|
|
501639 |
Objective Lens F300 |
|
|
|
|
|
|
501640 |
Objective Lens F350 |
|
|
|
|
|
|
501641 |
MiniTip fiber-optic oxygen sensor (2.3mm OD) |
|
|
|
|
|
|
501642 |
MiniFlow flow-through cell with integrated planar oxygen sensor |
|
|
|
|
|
|
501643 |
MiniFoil planar oxygen-sensitive foils, 1cm2 |
|
|
|
|
|
|
501644 |
Polymer optical fiber with 1 SMA connector |
|
|
|
|
|
|
501651 |
Magnetic Base, 75 (OD) mm x 20 (h) mm |
|
|
|
|
|
|
501652 |
MOBITY™ Magnetic Clamping System |
|
|
|
|
|
|
501653 |
Magnetic Base, 65 x 65 x 20 mm |
|
|
|
|
|
|
501656 |
Needle-type housing fiber-optic oxygen |
|
|
|
|
|
|
501657 |
Flow-through housed oxygen microsensor |
|
|
|
|
|
|
501658 |
Implantable oxygen microsensors |
|
|
|
|
|
|
501669 |
Objective Lens F100 |
|
|
|
|
|
|
501670 |
Coaxial Adapter BNC, Female to mini-double banana |
|
|
|
|
|
|
501700 |
Backhaus Towel Clamp, 5.25" |
|
|
|
|
|
|
501700-G |
Backhaus Towel Clamp, 5.25" (G) |
|
|
|
|
|
|
501701 |
Lister Bandage Scissors, 8.75cm |
|
|
|
|
|
|
501701-G |
Lister Bandage Scissors, 8.75cm (G) |
|
|
|
|
|
|
501702 |
Lister Bandage Scissors, 10.75cm |
|
|
|
|
|
|
501702-G |
Lister Bandage Scissors, 10.75cm (G) |
|
|
|
|
|
|
501703 |
Ligature Scissors, 10.75cm |
|
|
|
|
|
|
501703-G |
Ligature Scissors, 10.75cm (G) |
|
|
|
|
|
|
501704 |
Ligature Scissors, 13.25cm |
|
|
|
|
|
|
501704-G |
Ligature Scissors, 13.25cm (G) |
|
|
|
|
|
|
501705 |
Mosquito Hemostatic Forceps, 9cm, straight |
|
|
|
|
|
|
501705-G |
Mosquito Hemostatic Forceps, 9cm, straight (G) |
|
|
|
|
|
|
501706 |
Rochester-Pean Hemostatic Forceps, 16cm, curved |
|
|
|
|
|
|
501706-G |
Rochester-Pean Hemostatic Forceps, 16cm, curved (G) |
|
|
|
|
|
|
501707 |
Rochester-Pean Hemostatic Forceps, 19cm, straight |
|
|
|
|
|
|
501707-G |
Rochester-Pean Hemostatic Forceps, 19cm, straight (G) |
|
|
|
|
|
|
501708 |
Rochester-Pean Hemostatic Forceps, 19cm, curved |
|
|
|
|
|
|
501708-G |
Rochester-Pean Hemostatic Forceps, 19cm, curved (G) |
|
|
|
|
|
|
501709 |
Rochester-Oschner Hemostatic Forceps, 14cm, straight |
|
|
|
|
|
|
501709-G |
Rochester-Oschner Hemostatic Forceps, 14cm, straight (G) |
|
|
|
|
|
|
501710 |
Rochester-Oschner Hemostatic Forceps, 14cm, curved |
|
|
|
|
|
|
501710-G |
Rochester-Oschner Hemostatic Forceps, 14cm, curved (G) |
|
|
|
|
|
|
501711 |
Rochester-Oschner Hemostatic Forceps, 16cm, curved |
|
|
|
|
|
|
501711-G |
Rochester-Oschner Hemostatic Forceps, 16cm, curved (G) |
|
|
|
|
|
|
501712 |
Crile Hemostatic Forceps, 15.5cm, straight |
|
|
|
|
|
|
501712-G |
Crile Hemostatic Forceps, 15.5cm, straight (G) |
|
|
|
|
|
|
501713 |
Crile Hemostatic Forceps, 15.5cm, curved |
|
|
|
|
|
|
501713-G |
Crile Hemostatic Forceps, 15.5cm, curved (G) |
|
|
|
|
|
|
501714 |
Kelly Hemostatic Forceps, 15.5cm, straight |
|
|
|
|
|
|
501714-G |
Kelly Hemostatic Forceps, 15.5cm, straight (G) |
|
|
|
|
|
|
501715 |
Kelly Hemostatic Forceps, 15.5cm, curved |
|
|
|
|
|
|
501715-G |
Kelly Hemostatic Forceps, 15.5cm, curved (G) |
|
|
|
|
|
|
501716 |
Rochester-Carmalt Hemostatic Forceps, 20cm, curved |
|
|
|
|
|
|
501716-G |
Rochester-Carmalt Hemostatic Forceps, 20cm, curved (G) |
|
|
|
|
|
|
501717 |
Rochester-Carmalt Hemostatic Forceps, 20cm, straight |
|
|
|
|
|
|
501717-G |
Rochester-Carmalt Hemostatic Forceps, 20cm, straight (G) |
|
|
|
|
|
|
501718 |
Senn Retractor, 7", blunt |
|
|
|
|
|
|
501718-G |
Senn Retractor, 7", blunt (G) |
|
|
|
|
|
|
501719 |
Gelpi Retractor, 4.5" |
|
|
|
|
|
|
501720 |
Gelpi Retractor, 5.5" |
|
|
|
|
|
|
501720-G |
Gelpi Retractor, 5.5" (G) |
|
|
|
|
|
|
501721 |
Weitlaner Retractor, self-retaining, 5.5", 3x4 prongs, sharp |
|
|
|
|
|
|
501721-G |
Weitlaner Retractor, self-retaining, 5.5", 3x4 prongs, sharp (G) |
|
|
|
|
|
|
501722 |
Weitlaner Retractor, self-retaining, 5.5", 3x4 prongs, blunt |
|
|
|
|
|
|
501722-G |
Weitlaner Retractor, self-retaining, 5.5", 3x4 prongs, blunt (G) |
|
|
|
|
|
|
501723 |
Weitlaner Retractor, self-retaining, 6.5", 3x4 prongs, sharp |
|
|
|
|
|
|
501723.G |
Weitlaner Retractor, self-retaining, 6.5", 3x4 prongs, sharp (G) |
|
|
|
|
|
|
501724 |
Weitlaner Retractor, self-retaining, 6.5", 3x4 prongs, blunt |
|
|
|
|
|
|
501724-G |
Weitlaner Retractor, self-retaining, 6.5", 3x4 prongs, blunt (G) |
|
|
|
|
|
|
501725 |
Olsen-Hegar Needle Holder with Suture Scissors, 16.5cm, serrated
tungsten carbide jaws |
|
|
|
|
|
|
501725-G |
Olsen-Hegar Needle Holder with Suture Scissors, 16.5cm, serrated
tungsten carbide jaws (G) |
|
|
|
|
|
|
501726 |
Disposable Skin Stapler, 7mm staples |
|
|
|
|
|
|
501727-G |
Micro Tweezer, 15cm, serrated, angled tip (G) |
|
|
|
|
|
|
501728 |
Sterilizer Tray, 10 x 6 x 1.5", base, insert tray, lid, 2 mats |
|
|
|
|
|
|
501729 |
Sterilizer Tray for Sapphire Knife 6 x 2.5 x 0.75", base, lide 2 bars |
|
|
|
|
|
|
501730 |
Crile Hemostatic Forceps, 14cm, curved |
|
|
|
|
|
|
501730-G |
Crile Hemostatic Forceps, 14cm, curved (G) |
|
|
|
|
|
|
501731 |
Microsurgical Knife, 13.5cm, 15°3mm blade, pkg 6 |
|
|
|
|
|
|
501733 |
Scissors, Metzenbaum, Tungsten Carbide, 14.5cm, straight |
|
|
|
|
|
|
501733-G |
Scissors, Metzenbaum, Tungsten Carbide, 14.5cm, straight (G) |
|
|
|
|
|
|
501734 |
Scissors, Metzenbaum, Tungsten Carbide, 14.5cm, curved |
|
|
|
|
|
|
501734-G |
Scissors, Metzenbaum, Tungsten Carbide, 14.5cm, curved (G) |
|
|
|
|
|
|
501735 |
Sapphire Blade, single edge, 1mm wide, 60° |
|
|
|
|
|
|
501736 |
Sapphire Blade, single edge, 1mm wide, 90° |
|
|
|
|
|
|
501739 |
Scissors, Metzenbaum, Tungsten Carbide, 11.5cm, straight |
|
|
|
|
|
|
501739-G |
Scissors, Metzenbaum, Tungsten Carbide, 11.5cm, straight (G) |
|
|
|
|
|
|
501740 |
Scissors, Metzenbaum, Tungsten Carbide, 11.5cm, curved |
|
|
|
|
|
|
501740-G |
Scissors, Metzenbaum, Tungsten Carbide, 11.5cm, curved (G) |
|
|
|
|
|
|
501741-G |
Tissue Forceps, 15cm, 2 x 3 teeth, straight tip (G) |
|
|
|
|
|
|
501742-G |
Tissue Forceps, 15cm, 1 x 2 teeth, straight tip (G) |
|
|
|
|
|
|
501743 |
Scissors, Operating, 11.5cm, straight, blunt/blunt |
|
|
|
|
|
|
501743-G |
Scissors, Operating, 11.5cm, straight, blunt/blunt (G) |
|
|
|
|
|
|
501744 |
Scissors, Metzenbaum, Tungsten Carbide, 18cm, straight |
|
|
|
|
|
|
501744-G |
Scissors, Metzenbaum, Tungsten Carbide, 18cm, straight (G) |
|
|
|
|
|
|
501745 |
Scissors, Metzenbaum, Tungsten Carbide, 18cm, curved |
|
|
|
|
|
|
501745-G |
Scissors, Metzenbaum, Tungsten Carbide, 18cm, curved (G) |
|
|
|
|
|
|
501747 |
Scissors, Metzenbaum, 11.5cm, straight |
|
|
|
|
|
|
501747-G |
Scissors, Metzenbaum, 11.5cm, straight (G) |
|
|
|
|
|
|
501748 |
Scissors, Metzenbaum, 11.5cm, curved |
|
|
|
|
|
|
501748-G |
Scissors, Metzenbaum, 11.5cm, curved (G) |
|
|
|
|
|
|
501749 |
Scissors, Mayo, 14cm, straight |
|
|
|
|
|
|
501749-G |
Scissors, Mayo, 14cm, straight (G) |
|
|
|
|
|
|
501750 |
Scissors, Mayo, 14cm, curved |
|
|
|
|
|
|
501750-G |
Scissors, Mayo, 14cm, curved (G) |
|
|
|
|
|
|
501751 |
Scissors, Mayo, 17cm, straight |
|
|
|
|
|
|
501751-G |
Scissors, Mayo, 17cm, straight (G) |
|
|
|
|
|
|
501752 |
Scissors, Mayo, 17cm, curved |
|
|
|
|
|
|
501752-G |
Scissors, Mayo, 17cm, curved (G) |
|
|
|
|
|
|
501753 |
Scissors, Operating, 11.5cm, straight, sharp/blunt |
|
|
|
|
|
|
501753-G |
Scissors, Operating, 11.5cm, straight, sharp/blunt (G) |
|
|
|
|
|
|
501754 |
Scissors, Operating, 11.5cm, straight, sharp/sharp |
|
|
|
|
|
|
501754-G |
Scissors, Operating, 11.5cm, straight, sharp/sharp (G) |
|
|
|
|
|
|
501755 |
Scissors, Operating, 11.5cm, curved, sharp/sharp |
|
|
|
|
|
|
501755-G |
Scissors, Operating, 11.5cm, curved, sharp/sharp (G) |
|
|
|
|
|
|
501756 |
Scissors, Operating, 11.5cm, curved, sharp/blunt |
|
|
|
|
|
|
501756-G |
Scissors, Operating, 11.5cm, curved, sharp/blunt (G) |
|
|
|
|
|
|
501757 |
Scissors, Operating, 11.5cm, curved, blunt/blunt |
|
|
|
|
|
|
501757-G |
Scissors, Operating, 11.5cm, curved, blunt/blunt (G) |
|
|
|
|
|
|
501758 |
Scissors, Iris, 11cm, straight |
|
|
|
|
|
|
501758-G |
Scissors, Iris, 11cm, straight (G) |
|
|
|
|
|
|
501759 |
Scissors, Iris, 11cm, curved |
|
|
|
|
|
|
501759-G |
Scissors, Iris, 11cm, curved (G) |
|
|
|
|
|
|
501760 |
Sapphire Blade, single edge, 1mm wide, 15° |
|
|
|
|
|
|
501761 |
Crescent Sapphire Blade, 2.8mm wide (for handles 501763 & 501812) |
|
|
|
|
|
|
501762 |
Phaco Sapphire Blade, 2.7/3.4mm wide (for handles 501763 & 501812) |
|
|
|
|
|
|
501763 |
Stainless Angled Handle for Sapphire Knife, 13cm, retractable |
|
|
|
|
|
|
501764 |
Mini Dumont #M5S, Stainless Steel, 8.2cm, 0.09 x 0.05 mm tip |
|
|
|
|
|
|
501767 |
Scissors, Iris, Ribbon Handle, 11cm, straight |
|
|
|
|
|
|
501768 |
Scissors, Iris, Ribbon Handle, 11cm, curved |
|
|
|
|
|
|
501770 |
Jansen Retractor, 11.5cm, 3x3 prongs, blunt |
|
|
|
|
|
|
501770-G |
Jansen Retractor, 11.5cm, 3x3 prongs, blunt (G) |
|
|
|
|
|
|
501771 |
Bone Wax, Sterile, 3g |
|
|
|
|
|
|
501772 |
Wecker Spatula, 14cm, 2mm wide blade |
|
|
|
|
|
|
501772-G |
Wecker Spatula, 14cm, 2mm wide blade (G) |
|
|
|
|
|
|
501773 |
Meyhoefer Curette, 14cm, 1.5mm diameter |
|
|
|
|
|
|
501773-G |
Meyhoefer Curette, 14cm, 1.5mm diameter (G) |
|
|
|
|
|
|
501775 |
Bishop Harmon Forceps, Straight, 3.5", Serrated tips |
|
|
|
|
|
|
501775-G |
Bishop Harmon Forceps, Straight, 3.5", Serrated tips (G) |
|
|
|
|
|
|
501776 |
Bishop Harmon Forceps, Straight, 3.5", 1 x 2 teeth |
|
|
|
|
|
|
501776-G |
Bishop Harmon Forceps, Straight, 3.5", 1 x 2 teeth (G) |
|
|
|
|
|
|
501777 |
Student Vannas Scissors, 9cm, 8mm blade, 500um tips |
|
|
|
|
|
|
501778 |
Vannas Scissors, 8cm, straight, 0.015 x 0.015 mm, super fine |
|
|
|
|
|
|
501779-G |
Micro Vessel Clips, 0.75 x 4 mm straight, serrated jaws (G) |
|
|
|
|
|
|
501780-G |
Micro Vessel Clips, 0.8 x 6 mm straight, serrated jaws (G) |
|
|
|
|
|
|
501781-G |
Micro Vessel Clips, 1x 8 mm straight, serrated jaws (G) |
|
|
|
|
|
|
501782-G |
Micro Vessel Clips, 1.5 x 10 mm straight, serrated jaws (G) |
|
|
|
|
|
|
501783-G |
Micro Vessex Clips, 1 x 6 mm slightly curved jaws (G) |
|
|
|
|
|
|
501784-G |
Micro Vessex Clips, 1 x 6 mm fully curved jaws (G) |
|
|
|
|
|
|
501785-G |
Micro Vessex Clips, 1 x 6 mm 45°angle jaws (G) |
|
|
|
|
|
|
501786-G |
Schwartz Vessel Clips, 1.7 x 8 mm straight jaws (G) |
|
|
|
|
|
|
501787-G |
Schwartz Vessel Clips, 1.7 x 8 mm slightly angled jaws (G) |
|
|
|
|
|
|
501788-G |
Schwartz Vessel Clips, 1.7 x 8 mm strong angled jaws (G) |
|
|
|
|
|
|
501789 |
Applicator Spears, Pkg/200 |
|
|
|
|
|
|
501790 |
Vannas Scissors, 8cm, 5mm angled-on-flat blades, 0.1mm tip |
|
|
|
|
|
|
501791 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501792 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501793 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501794 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501795 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501796 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501797 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501798 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501799 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501800 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501801 |
NEEDLES,CUTTING,1/2 CIRCLE |
|
|
|
|
|
|
501802 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501803 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501804 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501805 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501806 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501807 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501808 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501809 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501810 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501811 |
Sapphire knife handle, retractable, titanium, 13cm |
|
|
|
|
|
|
501812 |
Titanium Angled Handle for Sapphire Knife, 13cm, retractable |
|
|
|
|
|
|
501816 |
Disposable Biopsy Punch, 1.5mm diameter, pkg 50 |
|
|
|
|
|
|
501817 |
Disposable Biopsy Punch, 2.0mm diameter, pkg 50 |
|
|
|
|
|
|
501818 |
Disposable Biopsy Punch, 3.0mm diameter, pkg 50 |
|
|
|
|
|
|
501819 |
Micro Burr System, 110V |
|
|
|
|
|
|
501830 |
Staple Remover |
|
|
|
|
|
|
501839 |
SCISSORS,SUPERFINE VANNAS,CVD |
|
|
|
|
|
|
501842 |
BALL MILL, CARBIDE #7, PK OF 5 |
|
|
|
|
|
|
501844 |
ALM Retractor 2x2 Prong |
|
|
|
|
|
|
501846 |
RETRACTOR,AGRICOLA,4CM |
|
|
|
|
|
|
501850 |
Abrading Tip, Rubber, Pkg 20 |
|
|
|
|
|
|
501851 |
Abrading Tip, Stone, Pkg 21 |
|
|
|
|
|
|
501852 |
Accessory Stand for Drill Kit |
|
|
|
|
|
|
501853 |
Ball Mill, Carbide, #1, 5 pk |
|
|
|
|
|
|
501854 |
Ball Mill, Carbide, #2, 5 pk |
|
|
|
|
|
|
501855 |
Ball Mill, Carbide, #3, 5 pk |
|
|
|
|
|
|
501856 |
Ball Mill, Carbide, #4, 5 pk |
|
|
|
|
|
|
501857 |
Ball Mill, Carbide, #5, 5 pk |
|
|
|
|
|
|
501858 |
Ball Mill, Carbide, #6, 5 pk |
|
|
|
|
|
|
501859 |
Retractor, Jansen, 4.5", Sharp |
|
|
|
|
|
|
501860 |
Ball Mill, Carbide, #1/4, 5 pk |
|
|
|
|
|
|
501861 |
Ball Mill, Carbide, #1/2, 5 pk |
|
|
|
|
|
|
501862 |
Cutoff Disk, pkg 20 |
|
|
|
|
|
|
501863 |
Mandrel, Screw, pkg 5 |
|
|
|
|
|
|
501864 |
Mandrel, Threaded, pkg 5 |
|
|
|
|
|
|
501866 |
Ear Tags, Pk 100 (Seq 000-099) |
|
|
|
|
|
|
501867 |
Ear Tags, Pk 100 (Seq 100-199) |
|
|
|
|
|
|
501868 |
Ear Tags, Pk 100 (Seq 200-299) |
|
|
|
|
|
|
501869 |
Ear Tags, Pk 100 (Seq 300-399) |
|
|
|
|
|
|
501870 |
Ear Tags, Pk 100 (Seq 400-499) |
|
|
|
|
|
|
501871 |
Ear Tags, Pk 100 (Seq 500-599) |
|
|
|
|
|
|
501872 |
Ear Tags, Pk 100 (Seq 600-699) |
|
|
|
|
|
|
501873 |
Ear Tags, Pk 100 (Seq 700-799) |
|
|
|
|
|
|
501874 |
Ear Tags, Pk 100 (Seq 800-899) |
|
|
|
|
|
|
501875 |
Ear Tags, Pk 100 (Seq 900-999) |
|
|
|
|
|
|
501876 |
Ear Tag Applicator |
|
|
|
|
|
|
501888 |
TurtleSkin Gloves, small |
|
|
|
|
|
|
501889 |
TurtleSkin Gloves, medium |
|
|
|
|
|
|
501890 |
TurtleSkin Gloves, large |
|
|
|
|
|
|
501891 |
TurtleSkin Gloves, x-large |
|
|
|
|
|
|
501892 |
Small Acrylic Surgery Tray |
|
|
|
|
|
|
501895 |
Mouse Vessel Cannulation Kit |
|
|
|
|
|
|
501897 |
Mouse Eyelid Retractor, small |
|
|
|
|
|
|
501898 |
Mouse Eyelid Retractor, medium |
|
|
|
|
|
|
501899 |
Mouse Eyelid Retractor, large |
|
|
|
|
|
|
501900 |
Demagnetizer |
|
|
|
|
|
|
501902 |
Frog Clips, ring tipped |
|
|
|
|
|
|
501903 |
Frog Clips, pointy tips |
|
|
|
|
|
|
501904 |
Frog Clips, paddle tips |
|
|
|
|
|
|
501905 |
Harris Uni-Core Biopsy Punch, 0.5mm |
|
|
|
|
|
|
501906 |
Harris Uni-Core Biopsy Punch, 0.75mm |
|
|
|
|
|
|
501907 |
Harris Uni-Core Biopsy Punch, 1.25mm |
|
|
|
|
|
|
501908 |
Harris Uni-Core Biopsy Punch, 2mm |
|
|
|
|
|
|
501909 |
Harris Uni-Core Biopsy Punch, 5mm |
|
|
|
|
|
|
501910 |
Harris Uni-Core Biopsy Punch, 6mm |
|
|
|
|
|
|
501911 |
Harris Uni-Core Biopsy Punch, 7mm |
|
|
|
|
|
|
501912 |
Harris Uni-Core Biopsy Punch, 8mm |
|
|
|
|
|
|
501913 |
Aluminum Sterilization Tray, 300x140x40mm |
|
|
|
|
|
|
501914 |
Aluminum Sterilization Tray, 300x140x70mm |
|
|
|
|
|
|
501915 |
Filters for aluminum trays, pkg 100 |
|
|
|
|
|
|
501916 |
Indication papers for aluminum trays, pkg 100 |
|
|
|
|
|
|
501923 |
NEEDLE HOLDER, TITANUM, 14CM |
|
|
|
|
|
|
501924 |
SCISSORS, SPRING, 12.5CM, STR |
|
|
|
|
|
|
501925 |
SCISSORS, SPRING, 12.5CM, CVD |
|
|
|
|
|
|
501930 |
SCISSORS, STUDENT VANNAS |
|
|
|
|
|
|
501934 |
CASE,INSTRUMENT 230X150X50MM |
|
|
|
|
|
|
501935 |
NEEDLES,CUTTING,3/8 CIRCLE |
|
|
|
|
|
|
501936 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501937 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501938 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501939 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501940 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501941 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501942 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501943 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501944 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501945 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501946 |
NEEDLES,TAPER PT,1/2 CIRCLE |
|
|
|
|
|
|
501947 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501948 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501949 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501950 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501951 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501952 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501953 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501954 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501955 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501956 |
NEEDLES,TAPER PT,3/8 CIRCLE |
|
|
|
|
|
|
501957 |
NEEDLES,CUTTING,5/16 CIRCLE |
|
|
|
|
|
|
501958 |
NEEDLES,CUTTING,5/16 CIRCLE |
|
|
|
|
|
|
501959 |
NEEDLES,CUTTING,5/16 CIRCLE |
|
|
|
|
|
|
501960 |
NEEDLES,CUTTING,5/16 CIRCLE |
|
|
|
|
|
|
501961 |
NEEDLES,CUTTING,5/16 CIRCLE |
|
|
|
|
|
|
501962 |
NEEDLES,TAPER PT,5/16 CIRCLE |
|
|
|
|
|
|
501963 |
NEEDLES,TAPER PT,5/16 CIRCLE |
|
|
|
|
|
|
501964 |
NEEDLES,TAPER PT,5/16 CIRCLE |
|
|
|
|
|
|
501965 |
NEEDLES,TAPER PT,5/16 CIRCLE |
|
|
|
|
|
|
501966 |
NEEDLES,TAPER PT,5/16 CIRCLE |
|
|
|
|
|
|
501967 |
Goldstein Retractor, small |
|
|
|
|
|
|
501968 |
Goldstein Retractor, medium |
|
|
|
|
|
|
501969 |
Goldstein Retractor, large |
|
|
|
|
|
|
501986 |
Silicone Dissecting Pad Kit |
|
|
|
|
|
|
502000 |
PZMIV Binocular Body (0.1-5.0x objective range) |
|
|
|
|
|
|
502001 |
PZMIV Trinocular Body (0.1-5.0x objective range) |
|
|
|
|
|
|
502004 |
Boom Stand without focus mount |
|
|
|
|
|
|
502005 |
Ball Bearing Boom Stand without focus mount |
|
|
|
|
|
|
502006 |
Boom Clamp Stand |
|
|
|
|
|
|
502007 |
Articulated Arm with Table Clamp, without Focus Mount |
|
|
|
|
|
|
502009 |
Universal Focus Mount |
|
|
|
|
|
|
502010 |
10x Wide Field Eyepiece, High Eye Point, distortion-free for PZMIV
(pair) |
|
|
|
|
|
|
502011 |
16x Wide Field Eyepiece for PZMIV (pair) |
|
|
|
|
|
|
502012 |
20x Wide Field Eyepiece for PZMIV (pair) |
|
|
|
|
|
|
502013 |
25x Wide Field Eyepiece for PZMIV (pair) |
|
|
|
|
|
|
502015 |
Ring Light Adapter for PZMIV |
|
|
|
|
|
|
502016 |
0.32x Planachromatic Objective (distortion-free) |
|
|
|
|
|
|
502017 |
0.50x Planachromatic Objective (distortion-free) |
|
|
|
|
|
|
502018 |
0.63x Planachromatic Objective (distortion-free) |
|
|
|
|
|
|
502019 |
1.0x Planachromatic Objective (distortion-free) |
|
|
|
|
|
|
502032 |
Heated Stage Insert, Transparent, 108mm diam, for microscope stage |
|
|
|
|
|
|
502033 |
Heated Stage Insert, Transparent, 110mm diam, for microscope stage |
|
|
|
|
|
|
502034 |
Heated Stage Insert, Transparent, 110mm diam, for bench mounting |
|
|
|
|
|
|
502040 |
Mini Cover Slip, 5mm diameter, pkg/100 |
|
|
|
|
|
|
502041 |
Mini Cover Slip, 8mm diameter, pkg/100 |
|
|
|
|
|
|
502045 |
U-Frame, Base Plate & Rat Adapter only, w/o manipulator arm |
|
|
|
|
|
|
502063 |
Mouse/Neonatal Rat Adapter for 502044 |
|
|
|
|
|
|
502080 |
Jaw Holder Cuffs, set of 2 |
|
|
|
|
|
|
502102 |
Non-rotating Spindle Digital Micrometer |
|
|
|
|
|
|
502109 |
Color-coded Polyurethane Tubing, 1/16" ID x 8 Channels, 15ft |
|
|
|
|
|
|
502110 |
Micromanifold, 100µm ID tip, 5pk |
|
|
|
|
|
|
502111 |
Adjustable Bandpass Linear Variable Filter |
|
|
|
|
|
|
502112 |
Adapter for a cuvette holder |
|
|
|
|
|
|
502113 |
Cuvette-shaped PTFE Block for redirecting Excitation Energy |
|
|
|
|
|
|
502114 |
In-line filter holder for linear variable filters |
|
|
|
|
|
|
502115 |
Kit consisting of 502111, 502112, 502113 and 502114 |
|
|
|
|
|
|
502116 |
Slave Channel for SPECTRA-MC |
|
|
|
|
|
|
502117 |
USB Interface Module for SPECTRA-MC |
|
|
|
|
|
|
502119 |
pH MiniTip fiber optic pH sensors, 4mm OD (pkg 5) |
|
|
|
|
|
|
502120 |
pH MiniFlow fiber optic pH flow sensor (pkg 5) |
|
|
|
|
|
|
502121 |
pH MiniFoil fiber optic pH foil sensor, 3cm2 |
|
|
|
|
|
|
502122 |
pH MiniSpot fiber optic pH spot sensor, 5mm OD (pkg 10) |
|
|
|
|
|
|
502123 |
pH MicroTip fiber optic pH sensor, 140µm OD (pkg 5) |
|
|
|
|
|
|
502124 |
pH MicroImplant fiber optic pH implantable sensor, 140µm OD (pkg 5) |
|
|
|
|
|
|
502125 |
Micromanifold, 200µm ID tip, 5pk |
|
|
|
|
|
|
502126 |
Single-filter Slide for High-pass Applications |
|
|
|
|
|
|
502127 |
Single-filter Slide for Low-pass Applications |
|
|
|
|
|
|
502128 |
Double-filter Slide for High-pass Applications |
|
|
|
|
|
|
502129 |
Double-filter Slide for Low-pass Applications |
|
|
|
|
|
|
502157 |
Replacement Battery (package of 10) |
|
|
|
|
|
|
502160 |
STAND, TRK,H-F LIT,FAN PZMIV |
|
|
|
|
|
|
502161 |
Adaptor 0.3X |
|
|
|
|
|
|
502162 |
Adaptor 0.5X |
|
|
|
|
|
|
502163 |
Wall Mount Plate for Articulated Arm System |
|
|
|
|
|
|
502166 |
EYEPIECE 15X W/RETICLE |
|
|
|
|
|
|
502167 |
LAMP REPL, FLUORESCENT 5W |
|
|
|
|
|
|
502168 |
LAMP REPL, TUNGSTEN H 6V 15W |
|
|
|
|
|
|
502190 |
Bigfoot Non-Magnetic Stand |
|
|
|
|
|
|
502193-4 |
Parallel Frame Clamp (pkg of 4) |
|
|
|
|
|
|
502194 |
Heating Coil, Nickel-Chromium, for PUL-2, 5 pk |
|
|
|
|
|
|
502195 |
Small Heating Plate w/ built-in RTD sensor, 10x15cm |
|
|
|
|
|
|
502196 |
Medium Heating Plate w/built-in RTD sensor, 15x25cm |
|
|
|
|
|
|
502197 |
Rectal Temperature Probe |
|
|
|
|
|
|
502198 |
Transducer Positioner |
|
|
|
|
|
|
502201 |
V-clamp for Stereotaxic Frame |
|
|
|
|
|
|
502600 |
Lab Standard with 18°Ear Bars |
|
|
|
|
|
|
502603 |
Dual Manipulator Lab Standard with 18°Ear Bars |
|
|
|
|
|
|
502650 |
Lab Standard with 45°Ear Bars |
|
|
|
|
|
|
502653 |
Dual Manipulator Lab Standard with 45°Ear Bars |
|
|
|
|
|
|
502859 |
Flared O-Ring Kit |
|
|
|
|
|
|
502900 |
Digital Lab Standard with LED Display, 18°Ear Bars |
|
|
|
|
|
|
502903 |
Digital Dual Manipulator Lab Standard with LED Display, 18°Ear Bars |
|
|
|
|
|
|
502950 |
Digital Lab Standard with LED Display, 45°Ear Bars |
|
|
|
|
|
|
502953 |
Digital Dual Manipulator Lab Standard with LED Display, 45°Ear Bars |
|
|
|
|
|
|
503022 |
replacement silicone tubing, 1m, 1.6 mm i.d., #14, with stops |
|
|
|
|
|
|
503023 |
replacement -silicone tubing, 1m, 6.4 mm i.d., #17 |
|
|
|
|
|
|
503036 |
Digital Micrometer |
|
|
|
|
|
|
503041 |
Large Clamp with Rod (157 mm), opens up to 85 mm |
|
|
|
|
|
|
503042 |
Medium Clamp with rod (157 mm), opens up to 45 mm |
|
|
|
|
|
|
503049 |
replacement tubing cartridge, large |
|
|
|
|
|
|
503050 |
replacement tubing cartridge, small |
|
|
|
|
|
|
503051 |
Manual Stage for PZMiii |
|
|
|
|
|
|
503066 |
Flared Glass, 100 pieces |
|
|
|
|
|
|
503067 |
BLPR2 Transducer without cable |
|
|
|
|
|
|
503070 |
Polished Stainless Steel Post, 12mm OD, 25cm long, no thread |
|
|
|
|
|
|
503071 |
Polished Stainless Steel Post, 12mm OD, 50cm long, no thread |
|
|
|
|
|
|
503072 |
Polished Stainless Steel Post, 12mm OD, 75cm long, no thread |
|
|
|
|
|
|
503073 |
Polished Stainless Steel Post, 12mm OD, 25cm long, M8 thread |
|
|
|
|
|
|
503074 |
Polished Stainless Steel Post, 12mm OD, 50cm long, M8 thread |
|
|
|
|
|
|
503075 |
Polished Stainless Steel Post, 12mm OD, 60cm long, M8 thread |
|
|
|
|
|
|
503076 |
Polished Stainless Steel Post, 12mm OD, 75cm long, M8 thread |
|
|
|
|
|
|
503077 |
Polished Stainless Steel Post, 12mm OD, 80cm long, M8 thread |
|
|
|
|
|
|
503078-4 |
T-joint Frame Clamp (pkg of 4) |
|
|
|
|
|
|
503079-4 |
In-line Frame Clamp (pkg of 4) |
|
|
|
|
|
|
503080-4 |
Frame Clamp with Parallel Surface Mount (including two 10-32 mounting
screws)(pkg of 4) |
|
|
|
|
|
|
503081-4 |
Vertical Surface Mount, M8 Threaded (including three 10-32 mounting
screws) (pkg of 4) |
|
|
|
|
|
|
503082-4 |
Board Frame Clamp, opens up to 8.5 mm (pkg of 4) ...... |
|
|
|
|
|
|
503083 |
Light Rectangular Base (with M8 thread mount and thumbscrew mount),
23ˇ-15.6 cm, 0.5 lb |
|
|
|
|
|
|
503084 |
Small V-base with M8 Thread Mount ......... |
|
|
|
|
|
|
503085 |
Large V-base with M8 Thread Mount |
|
|
|
|
|
|
503086 |
Small Clamp with rod (157 mm), opens up to 16 mm |
|
|
|
|
|
|
503088-10 |
Thumbscrew, M5ˇ-20 mm (pkg of 10) |
|
|
|
|
|
|
503120 |
TTL Control Module |
|
|
|
|
|
|
503121 |
Silicone Tubing w/stops 2.4mmID x 0.8mm wall x 1mm |
|
|
|
|
|
|
503122 |
Silicone Tubing w/stops 1mmID x 1mmwall x 1m |
|
|
|
|
|
|
503201 |
Glass Hook |
|
|
|
|
|
|
503204 |
Framework Starter Kit |
|
|
|
|
|
|
503205 |
Framework Small Assembly |
|
|
|
|
|
|
503206 |
Framework Large Assembly |
|
|
|
|
|
|
503207 |
Framework V-Assembly |
|
|
|
|
|
|
503208 |
Frameword V-Assembly Large |
|
|
|
|
|
|
503211 |
Small Vascular Measure |
|
|
|
|
|
|
503212 |
Micro Forceps, Straight, Atraumatic |
|
|
|
|
|
|
503213 |
Micro Forceps, Cvd Atraumatic |
|
|
|
|
|
|
503214 |
Vannas Scissors, 45 Degree Angle |
|
|
|
|
|
|
503215 |
McPherson-Vannas 0.2mm Tips |
|
|
|
|
|
|
503216 |
Vannas 0.49MM Round Tips |
|
|
|
|
|
|
503217 |
McPherson-Vannas 0.32mm Tips |
|
|
|
|
|
|
503219 |
Holding Forceps - Needle Holder |
|
|
|
|
|
|
503220 |
Holding Forceps - Needle Holder |
|
|
|
|
|
|
503221 |
Graeffe Hook |
|
|
|
|
|
|
503222 |
Wescott Scissors 11cm Blunt |
|
|
|
|
|
|
503223 |
Wescott Scissors 11cm Sharp |
|
|
|
|
|
|
503224 |
Iris Scissors 11cm Angular SMO |
|
|
|
|
|
|
503225 |
Iris Scissors 11cm Angular Serr |
|
|
|
|
|
|
503226 |
Rogeur#5 Side Cutter ME |
|
|
|
|
|
|
503227 |
Crile Hemostatic Forceps, Strt |
|
|
|
|
|
|
503228 |
Crile Hemostatic Forceps, Curve |
|
|
|
|
|
|
503229 |
Crile Hemostatic Forceps Curve |
|
|
|
|
|
|
503230 |
Cirle Hemostatic Forceps, Strt |
|
|
|
|
|
|
503232 |
Dumont Flat and rounded tips |
|
|
|
|
|
|
503233 |
Dumont Wide and Square tips |
|
|
|
|
|
|
503234 |
Dumont Flat end Round tips SE |
|
|
|
|
|
|
503235 |
Dumont Flat End Long, Narro |
|
|
|
|
|
|
503236 |
Glover Bulldog Clamp, Straight |
|
|
|
|
|
|
503237 |
Glover Bulldog Clamp, Curved |
|
|
|
|
|
|
503238 |
Glover Bulldog Clamp Str |
|
|
|
|
|
|
503239 |
Glover Bulldog Clamp Cvd |
|
|
|
|
|
|
503240 |
Dissecting Miniature Scissors 9.5cm, sharp tips, handles #1 |
|
|
|
|
|
|
503241 |
Dissecting Miniature Scissors 9.5cm, sharp tips handles #2 |
|
|
|
|
|
|
503242 |
Dissecting Miniature Scissors, 9.5cm long, sharp fine tips, sq handles
#3 |
|
|
|
|
|
|
503243 |
Dissecting Miniature Scissors, 9.5cm , sharp med tips #4 |
|
|
|
|
|
|
503244 |
Dissecting Miniature Scissors, 9.5cm long, round tips #5 |
|
|
|
|
|
|
503245 |
Dissecting Miniature Scissors, 9.5cm, round tips #6 |
|
|
|
|
|
|
503246 |
La Grange Scissors, S-shape, S/S 11cm |
|
|
|
|
|
|
503247 |
Plastic Surgery Scissors, SS, 11cm, curved |
|
|
|
|
|
|
503248 |
Wilmer Iris Scissors, angled on flat, 10.5cn |
|
|
|
|
|
|
503249 |
Potts-Smith Scissors, Angled 25 degree 18cm |
|
|
|
|
|
|
503250 |
Potts-Smith Scissors, Angled 45 degree 18cm |
|
|
|
|
|
|
503251 |
Potts-Smith Scissors, Angled 460 degree 18cm |
|
|
|
|
|
|
503252 |
Bone Cutter, strong tips, str, 10.5cm |
|
|
|
|
|
|
503253 |
Bone Cutter, strong serrated tips, str, 10.5cm |
|
|
|
|
|
|
503254 |
Bone Cutter, strips tips, crvd, 10.5cm |
|
|
|
|
|
|
503255 |
Bone Cutter, strong serrated tips, cvd, 10.5cm |
|
|
|
|
|
|
503256 |
Goldman Fox scissors, cvd, serrated, 13cm |
|
|
|
|
|
|
503257 |
Castroviejo needle holder w/lock, smooth tips, str |
|
|
|
|
|
|
503258 |
Castroviejo needle holder w/lock, smooth tips, cvd |
|
|
|
|
|
|
503259 |
Iris Scissors, supercut, str, 11.5cm |
|
|
|
|
|
|
503260 |
Iris Scissors, supercut, cvd, 11.5cm |
|
|
|
|
|
|
503261 |
Iris Scissors, supercut, str 14cm |
|
|
|
|
|
|
503262 |
Iris Scissors, supercut, cvd, 14cm |
|
|
|
|
|
|
503263 |
Tenotomy Scissors, supercut, str, sharp, 11.5cm |
|
|
|
|
|
|
503264 |
Tenotomy Scissors, supercut, cvd, sharp, 11.5cm |
|
|
|
|
|
|
503265 |
Tenotomy Scissors, supercut, str, sharp, 14cm |
|
|
|
|
|
|
503266 |
Tenotomy Scissors, supercut, cvd, sharp, 14cm |
|
|
|
|
|
|
503267 |
Tenotomy Scissors, supercut, str, sharp, 16cm |
|
|
|
|
|
|
503268 |
Tenotomy Scissors, supercut, cvd, sharp 16cm |
|
|
|
|
|
|
503269 |
Metzenbaum Scissors, supercut, str 11.5cm |
|
|
|
|
|
|
503270 |
Metzenbaum Scissors, supercut, cvd 11.5cm |
|
|
|
|
|
|
503271 |
Metzenbaum Scissors, supercut, str 16cm |
|
|
|
|
|
|
503272 |
Metzenbaum Scissors, supercut, cvd 16cm |
|
|
|
|
|
|
503273 |
Metzenbaum Scissors, supercut str 20cm |
|
|
|
|
|
|
503274 |
Metzenbaum Scissors, supercut, cvd, 20cm |
|
|
|
|
|
|
503275 |
Metzenbaum Scissors, supercut, str 25 cm |
|
|
|
|
|
|
503276 |
Metzenbaum Scissors, supercut, cvd 25cm |
|
|
|
|
|
|
503277 |
Mayo Scissors, str, 16cm |
|
|
|
|
|
|
503278 |
Mayo Scissors, cvd, 16cm |
|
|
|
|
|
|
503279 |
Mayo Scissors, supercut, str, 20cm |
|
|
|
|
|
|
503280 |
Mayo Scissors, supercut, cvd 20cm |
|
|
|
|
|
|
503281 |
Mayo Scissors, supercut, str, 25com |
|
|
|
|
|
|
503282 |
Mayo Scissors, supercut, cvd, 25cm |
|
|
|
|
|
|
503284 |
Dingo Titanium Vessel Clip, .4mm-1.00mm |
|
|
|
|
|
|
503285 |
Dingo Tinanium Vessel Clip, .6mm-1.5mm |
|
|
|
|
|
|
503286 |
Dingo Tinanium Vessel Clip, 1mm-2mm |
|
|
|
|
|
|
503287 |
Dingo Titanium Vessel Clip, 1.5mm-3mm |
|
|
|
|
|
|
503288 |
Dingo Titanium Vessel Clip, 2mm-4mm |
|
|
|
|
|
|
503289 |
Dingo Titanium Vessel Clip, 3mm-5mm |
|
|
|
|
|
|
503290 |
Dumont Fine Tip, 45 degree bent tips, 135mm, SS, non-magnetic |
|
|
|
|
|
|
503291 |
Dumont Fine Tip, str tips, 135mm, SS, non-magnetic |
|
|
|
|
|
|
5052 |
Steel base plate, 8˝" x 12" (10 lb) |
|
|
|
|
|
|
5153 |
Support Stand |
|
|
|
|
|
|
5210 |
Glass Circulation Reservoir, Large (20 ml per side) |
|
|
|
|
|
|
5233 |
Replacement Stopper for 5210 |
|
|
|
|
|
|
5326 |
Blood Pressure Transducer without cable |
|
|
|
|
|
|
5332 |
Replacement Liquid Trap |
|
|
|
|
|
|
5340 |
Nanoliter Injector Spare Parts Kit |
|
|
|
|
|
|
5361 |
Replacement Stopper for 5362 |
|
|
|
|
|
|
5362 |
Glass Circulation Reservoir, Small (10 ml per side) |
|
|
|
|
|
|
5371 |
Low-noise cable, 2 mm gold pins, 2 ft (0.6 m) |
|
|
|
|
|
|
5372 |
Low-noise cable, 2 mm gold jacks, 2 ft (0.6 m) |
|
|
|
|
|
|
5373 |
Low-noise cable, Combination pin/jacks, 2 ft (0.6 m) |
|
|
|
|
|
|
5374 |
Low-noise cable, BNC (male), 2 mm gold pin, 4 ft (1.2 m) |
|
|
|
|
|
|
5375 |
Low-noise cable, BNC (male), 2 mm gold jack, 4 ft (1.2 m) |
|
|
|
|
|
|
5377 |
Replacement Start-up Kit for ISO2 |
|
|
|
|
|
|
5378 |
Replacement Electrode Sleeve Kit (pkg of 4) |
|
|
|
|
|
|
5381 |
Rack Mount Kit (up to 4 units) |
|
|
|
|
|
|
5399 |
T-Adapter Flow-Through Kit |
|
|
|
|
|
|
5430-10 |
PicoNozzle Kit (MPH6S for 1.0 mm pipette & 5-ft tubing assembly) |
|
|
|
|
|
|
5430-12 |
PicoNozzle Kit (MPH6S for 1.2 mm pipette & 5-ft tubing assembly) |
|
|
|
|
|
|
5430-15 |
PicoNozzle Kit (MPH6S for 1.5 mm pipette & 5-ft tubing assembly) |
|
|
|
|
|
|
5430-20 |
PicoNozzle Kit (MPH6S for 2.0 mm pipette & 5-ft tubing assembly) |
|
|
|
|
|
|
5430-ALL |
PicoNozzle Kit (for 1.0, 1.2, 1.5, and 1.65 mm pipettes & 5-ft tubing
assembly) |
|
|
|
|
|
|
5435 |
NO Replacement Start-Up Kit |
|
|
|
|
|
|
5436 |
Replacement Sleeve Kit for 2 mm sensor (pkg of 5) |
|
|
|
|
|
|
5440 |
PolyFil Multi-Barrel Micropipette Coupling Kit |
|
|
|
|
|
|
5444 |
3/16" (4.8 mm) diameter handle |
|
|
|
|
|
|
5447 |
Electrode Adapter |
|
|
|
|
|
|
5450 |
Replacement Belts for VSL (pkg of 4) |
|
|
|
|
|
|
5451 |
Replacement Belts for NVSLM1 (pkg of 8) |
|
|
|
|
|
|
5464 |
5-lb Weight for Tilting Base |
|
|
|
|
|
|
5468 |
2 mm receptacle to 0.031-inch jack (for mega-Tip-Z) |
|
|
|
|
|
|
5469 |
Adapts mini-banana plug to 0.031-inch receptacle |
|
|
|
|
|
|
5470 |
0.031-inch jack, 28 ga. wire, 12 inch (pkg of 4) |
|
|
|
|
|
|
5475 |
Adapter for SMA-terminated Fiber Optic Cables |
|
|
|
|
|
|
5479 |
Steel base plate, 12 x 24 x 3/8" (32 lb) |
|
|
|
|
|
|
5482 |
Pins, 0.031-inch, gold-plated (pkg of 50) |
|
|
|
|
|
|
5483 |
Sockets, 0.031-inch gold-plated (pkg of 50) |
|
|
|
|
|
|
5489 |
Adapter for Metal Microelectrode (DAM50 & DAM70) |
|
|
|
|
|
|
555001FT |
Forceps, Titanium, 8.5cm, straight with tying plates |
|
|
|
|
|
|
555005FT |
Forceps, Titanium, 8.5cm, angled with tying plates |
|
|
|
|
|
|
555007FT |
Tying forceps, 11.5cm, standard, straight, 0.25 x 0.15 mm tips, with 4mm
tying platform |
|
|
|
|
|
|
555041FT |
Forceps, 8.5cm, straight, 1x2 teeth |
|
|
|
|
|
|
555042FT |
Colibri forceps, Titanium, 8.5cm, curved, 1 x 2 teeth |
|
|
|
|
|
|
555043FT |
McPherson 90°toothed forceps, 8.5cm, 12mm straight shafts, 1x2 teeth,
0.10mm, with tying platform |
|
|
|
|
|
|
555046FT |
Colibri forceps, 8.5cm, 90°toothed (1x2 teeth), 0.12mm, with tying
platform |
|
|
|
|
|
|
555047FT |
90°toothed forceps (1x2 teeth), 11.5cm, standard, straight, 0.12mm, with
tying platform |
|
|
|
|
|
|
555053FT |
Bishop Harmon Forceps, Titanium, Straight, 3.5", 1 x 2 teeth |
|
|
|
|
|
|
555054FT |
Iris Forceps, Titanium, 1 x 2 teeth, 10cm, 0.8 mm straight tip |
|
|
|
|
|
|
555056FT |
Iris Forceps, Titanium, 1 x 2 teeth, 10cm, 0.8 mm curved tip |
|
|
|
|
|
|
555060FT |
Colibri suturing fine forceps, 7.5cm, 140°toothed (1x2 teeth), 0.1mm,
with tying platform |
|
|
|
|
|
|
555061FT |
Suturing forceps, ultrafine, 8.5cm, straight, 140°toothed (1x2 teeth),
0.12mm, with tying platform |
|
|
|
|
|
|
555063FT |
Suturing forceps, ultrafine, 11.5cm, straight, 140°toothed (1x2 teeth),
0.12mm with tying platform |
|
|
|
|
|
|
555080FT |
Notched forceps, standard, 8.5cm, straight, 1x1 teeth, with tying
platform |
|
|
|
|
|
|
555081FT |
Forceps, Titanium, 8.5cm, straight, notched tip |
|
|
|
|
|
|
555084FT |
Notched forceps, 11.5cm, standard, straight, 1x1 teeth, with tying
platform |
|
|
|
|
|
|
555086FT |
Pierse-Colibri corneal forceps, fine, 7.5cm, 1x1 pierse teeth, with
tying platform |
|
|
|
|
|
|
555190FT |
Kelman-McPherson forceps, very delicate, 8.5cm, 45°angled, 7.5mm long
smooth platform |
|
|
|
|
|
|
555191FT |
Kelman-McPherson forceps, very delicate, 11.5cm, 45°angled, 7.5mm long
smooth platform |
|
|
|
|
|
|
555222F |
Mosquito Hemostatic Forceps, Titanium, 9cm, straight |
|
|
|
|
|
|
555223F |
Mosquito Hemostatic Forceps, Titanium, 9cm, curved |
|
|
|
|
|
|
555227F |
Tweezer, #5 Biology style, Titanium, 11cm, 0.05 x 0.01 mm tips |
|
|
|
|
|
|
555229F |
Tweezer, #5 Biology style, Titanium, 11cm, 0.05 x 0.01 mm 45°bent tips |
|
|
|
|
|
|
555230F |
Tweezer, #7 Biology style, Titanium, 12cm, 0.07 x 0.03 mm half curved
tips |
|
|
|
|
|
|
555400NT |
Needle holder, 12cm, curved, standard range, without lock |
|
|
|
|
|
|
555403NT |
Barraquer Needle Holder, 12cm, curved with lock |
|
|
|
|
|
|
555406NT |
Troutman Needle Holder, 12cm, 10mm light curved jaws, without lock |
|
|
|
|
|
|
555407NT |
Troutman Needle Holder, 12cm, 10mm light curved jaws, with lock |
|
|
|
|
|
|
555419NT |
Castroviejo Needle Holder, Titanium, 14cm, straight 1.2mm wide serrated
tips with lock |
|
|
|
|
|
|
555500S |
McPherson-Westcott scissors, 11cm, flat handle, cuts 4-0 suture, small
blades, curved blunt tips |
|
|
|
|
|
|
555501S |
Conjunctival scissors, 12cm, round handle, small blades, curved blunt
tips |
|
|
|
|
|
|
555521S |
Castroviejo scissors, 11cm, small blades, cuts 4-0 suture, angled right |
|
|
|
|
|
|
555523S |
Castroviejo scissors, 12cm, round handles, strong curve |
|
|
|
|
|
|
555526S |
Castroviejo Corneal Scissors, round handles, 12cm, curved blunt tips,
6/0 traction suture |
|
|
|
|
|
|
555540S |
McPherson-Westcott stitch scissors, 11.5cm, flat handle, small blades,
very sharp |
|
|
|
|
|
|
555541S |
Westcott stitch scissors, 11cm, flat handle, standard blades, very sharp |
|
|
|
|
|
|
555561S |
Iris scissors, 10.5cm, curved |
|
|
|
|
|
|
555580S |
Vannas scissors, 11cm, straight, 10.5mm blades, sharp tips |
|
|
|
|
|
|
555582S |
Vannas scissors, 10.5cm,10.5mm blades, curved sharp tips |
|
|
|
|
|
|
555583S |
Vannas scissors, 10.5cm,12.5mm blades, curved sharp tips |
|
|
|
|
|
|
555584S |
Vannas Scissors, 10.5cm, angled, 10.5mm blades, sharp |
|
|
|
|
|
|
555600S |
Vannas Scissors, 11cm, straight, 13mm blades, sharp |
|
|
|
|
|
|
555620S |
Westcott tenotomy scissors, 11.5cm, flat right handles, standard blades,
curved blunt tips |
|
|
|
|
|
|
555640S |
Vannas Scissors, Titanium, 8cm, 7.5mm blade, straight |
|
|
|
|
|
|
555641S |
Vannas Scissors, Titanium, 8cm, 7.5mm blade, angled |
|
|
|
|
|
|
555646S |
Utility eye scissors, 11cm, straight, standard pointed tips |
|
|
|
|
|
|
555656S |
Lister Bandage Scissors, Titanium |
|
|
|
|
|
|
555709H |
Sinskey lens manipulating hook, 12cm, 0.15mm dia blunt tip, straight
shank, angled to right |
|
|
|
|
|
|
555711H |
Rentsch "Boat Hook" lens manipulator, 11cm |
|
|
|
|
|
|
555712H |
Drysdale nucleus manipulator, Paddle shaped tip |
|
|
|
|
|
|
555715H |
Kansas nucleus bisector, 11cm |
|
|
|
|
|
|
555717H |
Lens loop, 12cm, 3mm wide, serrated |
|
|
|
|
|
|
555718H |
Gass muscle hook, 12.5cm, with oval hole 10mm long |
|
|
|
|
|
|
555752H |
Heveston muscle hook, 8mm, With blunt spatulated tip |
|
|
|
|
|
|
555753H |
Heveston muscle hook, 10mm, With blunt spatulated tip |
|
|
|
|
|
|
555754H |
Heveston muscle hook, 12mm, With blunt spatulated tip |
|
|
|
|
|
|
555757H |
Heveston teaser hook, 6mm hook |
|
|
|
|
|
|
555759H |
Heveston retractors, 9mm |
|
|
|
|
|
|
555801L |
Wire speculum, 4.5cm, 13.5mm blades, maximum spread 20mm |
|
|
|
|
|
|
555803L |
Adustable Wire Speculum, 6.5cm, maximum spread 2.2cm |
|
|
|
|
|
|
555811L |
Crozafon-Delaage trabeculectomy punch, 9.5cm, 1.0mm diameter tip |
|
|
|
|
|
|
555814L |
Lasik instruments flap elevator |
|
|
|
|
|
|
555819L |
Corneal Epithelium Spatulae, 11cm |
|
|
|
|
|
|
555827L |
FORCEPS,PERONE LASIK |
|
|
|
|
|
|
555828L |
FORCEPS,MANCHE LASIK |
|
|
|
|
|
|
56200 |
In-Line Fiber Optic Filter Holder (SMA) |
|
|
|
|
|
|
56300 |
In-Line Fiber Optic Filter Holder (ST) |
|
|
|
|
|
|
58006 |
Sample Injector Assembly |
|
|
|
|
|
|
58450 |
LWCC Adapter Syringe Kit |
|
|
|
|
|
|
5B120F-4 |
Glass, Five-Barrel, 1.2 mm x 4" (102 mm), Fil, Pkg/65 |
|
|
|
|
|
|
5B120F-6 |
Glass, Five-Barrel, 1.2 mm x 6" (152 mm), Fil, Pkg/65 |
|
|
|
|
|
|
600009 |
Replacement Mixing Tips (pkg 10) |
|
|
|
|
|
|
600011 |
ISO-HPO Startup Kit |
|
|
|
|
|
|
600012 |
Replacement Sleeve Kit for ISO-HPO-2 (pkg of 4) |
|
|
|
|
|
|
600015 |
ISO-H2S2 Start-up Kit |
|
|
|
|
|
|
600016 |
ISO-H2S2 Replacement Sleeves, package of 4 |
|
|
|
|
|
|
6820 |
RTV Prime Coat, 400ml (13.5 oz) |
|
|
|
|
|
|
705 |
Electro 705 Electrometer |
|
|
|
|
|
|
705PF |
Replacement probe (includes calibration) |
|
|
|
|
|
|
711P |
Replacement Probe |
|
|
|
|
|
|
7128 |
RTV Coating (3 oz.) |
|
|
|
|
|
|
712P |
Replacement probe (includes calibration) |
|
|
|
|
|
|
715P |
Replacement probe (includes calibration) |
|
|
|
|
|
|
7325 |
ISO-NO Electrolyte (10 ml) |
|
|
|
|
|
|
7326 |
ISO2 Filling Solution (electrolyte) |
|
|
|
|
|
|
7335 |
Carbon Epoxy (2 oz.) |
|
|
|
|
|
|
7341 |
Superglue, low viscosity, 90-120 cps (pkg of 10) |
|
|
|
|
|
|
7342 |
Superglue, high viscosity, 1100-1600 cps (pkg of 10) |
|
|
|
|
|
|
7363 |
Enzol (quart) |
|
|
|
|
|
|
7364 |
Cidex Plus (quart) |
|
|
|
|
|
|
74020 |
Iso-DAM8A Single Channel Module |
|
|
|
|
|
|
74030 |
ISDB Chassis and Power Supply |
|
|
|
|
|
|
74040 |
Iso-DAM8A High Impedance Probe |
|
|
|
|
|
|
74050 |
ISDB Blank Panels |
|
|
|
|
|
|
75070 |
Filament Adjustment Assembly for 10x standard Objective |
|
|
|
|
|
|
7521 |
ISO-NO CO2 ELECTROLYTE (10ML) |
|
|
|
|
|
|
7600 |
Controller & Standard Tissue Bath Cooler |
|
|
|
|
|
|
7600S |
Controller & AutoclavableTissue Bath Cooler |
|
|
|
|
|
|
773 |
Duo 773 Electrometer |
|
|
|
|
|
|
7B100F-4 |
Glass, Seven-Barrel, 1.0 mm x 4" (102 mm), Fil, Pkg/60 |
|
|
|
|
|
|
7B100F-6 |
Glass, Seven-Barrel, 1.0 mm x 6" (152 mm), Fil, Pkg/60 |
|
|
|
|
|
|
7B120F-4 |
Glass, Seven-Barrel, 1.2 mm x 4" (102 mm), Fil, Pkg/75 |
|
|
|
|
|
|
800100 |
Spare Center Chamber Gasket, pk 2 |
|
|
|
|
|
|
800120 |
Replacement Lamp for FO-6000 |
|
|
|
|
|
|
800283 |
Rackmount Kit with Handles |
|
|
|
|
|
|
800292 |
40??Long-Working Distance Objective, 3 mm 0.25NA |
|
|
|
|
|
|
83016 |
Replacement Cable, DLS100-DS8000 |
|
|
|
|
|
|
900A |
Micropressure System |
|
|
|
|
|
|
900AP |
Replacement Probe for 900A |
|
|
|
|
|
|
900APP |
Replacement Pressure Pod for 900A |
|
|
|
|
|
|
A300 |
Pulsemaster™ Multi-Channel Stimulator |
|
|
|
|
|
|
A310 |
Accupulser™ Signal Generator |
|
|
|
|
|
|
A320D |
Isostim™ Stimulator/Isolator |
|
|
|
|
|
|
A320R |
Isostim™ Stimulator/Isolator, rechargeable |
|
|
|
|
|
|
A320RC |
A320R with A362 Charger |
|
|
|
|
|
|
A360LA |
High Voltage Isolator, charger included |
|
|
|
|
|
|
A362 |
Battery Charger for A320R, A360R, A365R, A395R |
|
|
|
|
|
|
A365D |
High Voltage Isolator, Bipolar, alkaline batteries |
|
|
|
|
|
|
A365R |
High Voltage Isolator, Bipolar, rechargeable |
|
|
|
|
|
|
A365RC |
A365R with Charger (A362) |
|
|
|
|
|
|
A382 |
Battery Charger for A385 |
|
|
|
|
|
|
A385R |
High Current Isolator, rechargeable |
|
|
|
|
|
|
A385RC |
A385R with Charger (A382) |
|
|
|
|
|
|
A395D |
Linear Stimulus Isolator |
|
|
|
|
|
|
A395R |
Linear Stimulus Isolator, Rechargeable |
|
|
|
|
|
|
A395RC |
A395R with Charger (A362) |
|
|
|
|
|
|
ABM |
Audible Baseline Monitor |
|
|
|
|
|
|
ADD204 |
Adhesive Discs, 4mm (pkg 100) |
|
|
|
|
|
|
ADD208 |
Adhesive Discs, 8mm (pkg 100) |
|
|
|
|
|
|
ADD212 |
Adhesive Discs, 12mm (pkg 100) |
|
|
|
|
|
|
ADPT-2 |
Footswitch |
|
|
|
|
|
|
AGT0510 |
Silver Wire, Teflon Coated, 0.005" (0.125 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGT05100 |
Silver Wire, Teflon Coated, 0.005" (0.125 mm), 100 ft (30 m) |
|
|
|
|
|
|
AGT0525 |
Silver Wire, Teflon Coated, 0.005" (0.125 mm), 25 ft (7.6 m) |
|
|
|
|
|
|
AGT1010 |
Silver Wire, Teflon Coated, 0.010" (0.25 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGT10100 |
Silver Wire, Teflon Coated, 0.010" (0.25 mm), 100 ft (30 m) |
|
|
|
|
|
|
AGT1025 |
Silver Wire, Teflon Coated, 0.010" (0.25 mm), 25 ft (7.6 m) |
|
|
|
|
|
|
AGT1510 |
Silver Wire, Teflon Coated, 0.015" (0.38 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGT1530 |
Silver Wire, Teflon Coated, 0.015" (0.38 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
AGW0510 |
Silver Wire, 0.005" (0.125 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGW0530 |
Silver Wire, 0.005" (0.125 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
AGW1010 |
Silver Wire, 0.010" (0.25 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGW1030 |
Silver Wire, 0.010" (0.25 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
AGW1510 |
Silver Wire, 0.015" (0.38 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGW1530 |
Silver Wire, 0.015" (0.38 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
AGW2010 |
Silver Wire, 0.020" (0.5 mm), 10 ft (3 m) |
|
|
|
|
|
|
AGW2030 |
Silver Wire, 0.020" (0.5 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
AGW4010 |
Silver Wire, 0.040" (1.0 mm), 10 ft (3 m) |
|
|
|
|
|
|
AIRTHERMY-ATX |
Air-Therm Heater 120 V, U.S. |
|
|
|
|
|
|
AIRTHERMZ-ATX |
Air-Therm Heater 240 V Specify line cord |
|
|
|
|
|
|
ALADDIN |
Syringe Pump Programmable 100V |
|
|
|
|
|
|
ALADDIN2 |
Dual Programmable Syringe Pump |
|
|
|
|
|
|
APEH1 |
Holder, Right, Male, Pellet, No Port, 2 Caps |
|
|
|
|
|
|
APEH2 |
Holder, Right, Male, Wire, No Port, 2 Caps |
|
|
|
|
|
|
APOLLO-1000 |
Free Radical Analyzer, Sngl Channle |
|
|
|
|
|
|
APOLLO-4000-4 |
4-Channel Free Radical Analyzer System |
|
|
|
|
|
|
ATC1000 |
Animal Temperature Controller (110V) w/rectal probe, heating plate or
pad |
|
|
|
|
|
|
AUW0170 |
Gold Wire, 0.001" (0.025 mm), 70 ft (17.7 m) |
|
|
|
|
|
|
AUW201 |
Gold Wire, 0.020" (0.5 mm), 1 ft (30 cm) |
|
|
|
|
|
|
B203MC4 |
Nanoliter 2000 & Micro4 Controller |
|
|
|
|
|
|
B203XVB |
Nanoliter 2000 (240 V, British plug) |
|
|
|
|
|
|
B203XVY |
Nanoliter 2000 (120 V, U.S. plug) |
|
|
|
|
|
|
B203XVZ |
Nanoliter 2000 (240 V, Continental plug) |
|
|
|
|
|
|
BAT-10R/LOP |
Multiple Input Type T Thermocouple Thermometer, 110V |
|
|
|
|
|
|
BAT-10R/LOP-220 |
Multiple Input Type T Thermocouple Thermometer, 220V |
|
|
|
|
|
|
BAT-12R |
Single Input Type T Thermocouple Thermometer, 110V |
|
|
|
|
|
|
BAT-12R-220 |
Single Input Type T Thermocouple Thermometer, 220V |
|
|
|
|
|
|
BD11E |
Chart Recorder, single pen with pen lift & remote control |
|
|
|
|
|
|
BD12E |
Chart Recorder, dual pen with pen lift & remote control |
|
|
|
|
|
|
BDXR124 |
Black Pens, BD111 & BD112, Ch. 1 (pkg of 6) |
|
|
|
|
|
|
BDXR13 |
Red Pens, BD112, Ch. 2 (pkg of 6) |
|
|
|
|
|
|
BDXR13B |
Black Pens, BD112, Ch. 2 (pkg of 6) |
|
|
|
|
|
|
BDXR9 |
Chart Paper (10 rolls) |
|
|
|
|
|
|
BEECAL |
Beetrode Offset & Cable (BNC, 2 mm pin) |
|
|
|
|
|
|
BIF22 |
Split or combine similar intensities (200/200) |
|
|
|
|
|
|
BIF41 |
Combine UV (400) + VIS (100) |
|
|
|
|
|
|
BIF44 |
Split or combine similar intensities (400/400) |
|
|
|
|
|
|
BIF62 |
Combine UV (400) + VIS (200) |
|
|
|
|
|
|
BIF66 |
Split or combine similar intensities (600/600) |
|
|
|
|
|
|
BLADES |
Replacement Blades (100) |
|
|
|
|
|
|
BLPR |
Blood Pressure Transducer & Cable |
|
|
|
|
|
|
BP1 |
Pressure Monitor |
|
|
|
|
|
|
BPCABLE2 |
Cable (12ft) with DIN connector |
|
|
|
|
|
|
BRIDGE8 |
BRIDGE-8 Transducer Amplifier Module |
|
|
|
|
|
|
BT-1 |
General Purpose workhorse probe, tip 0.02" diam, 5ft |
|
|
|
|
|
|
C3005 |
Carbon Wire, 0.0012" (30 µm), 5 ft (1.5 m) |
|
|
|
|
|
|
CAL900A |
Pressure Calibration Chamber |
|
|
|
|
|
|
CALBUF-1 |
Kit of 8 Calcium Buffer Solutions |
|
|
|
|
|
|
CALBUF-2 |
Kit of 11 Calcium Buffer Solutions |
|
|
|
|
|
|
CALICELL-12 |
12mm CAL-CEL for Endohm-6 & Endohm-12 |
|
|
|
|
|
|
CALICELL-24 |
30mm CAL-CEL for Endohm-24 |
|
|
|
|
|
|
CALICELL-HTSF |
Optional CaliCell™ for REMS Falcon HTS Multiwell Insert System |
|
|
|
|
|
|
CBL100 |
MiniPhone Patch Cable, 3.5 mm MiniPhone plugs, 6 ft (1.8 m) |
|
|
|
|
|
|
CBL102 |
Cable, BNC to 3.5mm plug (6 ft) |
|
|
|
|
|
|
CC-3-UV |
Cosine Corrector |
|
|
|
|
|
|
CELS |
Temperature Transducer |
|
|
|
|
|
|
CF10-100 |
Carbon Fiber Microelectrodes, Uncoated, 10µ X 100µ |
|
|
|
|
|
|
CF10-25 |
Carbon Fiber Microelectrodes, Uncoated, 10µ X 25µ |
|
|
|
|
|
|
CF10-250 |
Carbon Fiber Microelectrodes, Uncoated, 10µ X 250µ |
|
|
|
|
|
|
CF10-50 |
Carbon Fiber Microelectrodes, Uncoated, 10µ X 50µ |
|
|
|
|
|
|
CF10-500 |
Carbon Fiber Microelectrodes, Uncoated, 10µ X 500µ |
|
|
|
|
|
|
CF30-100 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 100µ |
|
|
|
|
|
|
CF30-1000 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 1000µ |
|
|
|
|
|
|
CF30-25 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 25µ |
|
|
|
|
|
|
CF30-250 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 250µ |
|
|
|
|
|
|
CF30-50 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 50µ |
|
|
|
|
|
|
CF30-500 |
Carbon Fiber Microelectrodes, Uncoated, 30µ X 500µ |
|
|
|
|
|
|
CFN10-100 |
Carbon Fiber Microelectrodes, Nafion Coated, 10µ X 100µ |
|
|
|
|
|
|
CFN10-25 |
Carbon Fiber Microelectrodes, Nafion Coated, 10µ X 25µ |
|
|
|
|
|
|
CFN10-250 |
Carbon Fiber Microelectrodes, Nafion Coated, 10µ X 250µ |
|
|
|
|
|
|
CFN10-50 |
Carbon Fiber Microelectrodes, Nafion Coated, 10µ X 50µ |
|
|
|
|
|
|
CFN10-500 |
Carbon Fiber Microelectrodes, Nafion Coated, 10µ X 500µ |
|
|
|
|
|
|
CFN30-100 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 100µ |
|
|
|
|
|
|
CFN30-1000 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 1000µ |
|
|
|
|
|
|
CFN30-25 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 25µ |
|
|
|
|
|
|
CFN30-250 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 250µ |
|
|
|
|
|
|
CFN30-50 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 50µ |
|
|
|
|
|
|
CFN30-500 |
Carbon Fiber Microelectrodes, Nafion Coated, 30µ X 500µ |
|
|
|
|
|
|
CHM1 |
Medium Chamber |
|
|
|
|
|
|
CHM2 |
Small Chamber |
|
|
|
|
|
|
CHM3 |
Large Chamber |
|
|
|
|
|
|
CHM4 |
Extra Small Chamber with O-Ring Seal |
|
|
|
|
|
|
CHM5 |
Snap Chamber (fits Costar Snapwell cups) |
|
|
|
|
|
|
CHM5M12 |
Millipore Chamber (fits Millipore 12mm insert) |
|
|
|
|
|
|
CHM6 |
Small Rectangular Chamber |
|
|
|
|
|
|
CHM7 |
Large Rectangular Chamber |
|
|
|
|
|
|
CHM8 |
Extra Small Chamber with Mounting Pins |
|
|
|
|
|
|
CMF20GxxL |
MicroFil, 20 Gauge, 700 µm ID, 850 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF22GxxL |
MicroFil, 22 Gauge, 530 µm ID, 700 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF23GxxL |
MicroFil, 23 Gauge, 530 µm ID, 665 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF26GxxL |
MicroFil, 26 Gauge, 320 µm ID, 430 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF28GxxL |
MicroFil, 28 Gauge, 250 µm ID, 350 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF31GxxL |
MicroFil, 31 Gauge, 100 µm ID, 238 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF34GxxL |
MicroFil, 34 Gauge, 100 µm ID, 164 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF35GxxL |
MicroFil, 35 Gauge, 75 µm ID, 144 µm OD (pkg of 4) |
|
|
|
|
|
|
CMF90UxxL |
MicroFil, approx. 36 Gauge, 20 µm ID, 90 µm OD (pkg of 4) |
|
|
|
|
|
|
COLCAM NTSC |
Color CCD Video Camera (120 V, US plug) |
|
|
|
|
|
|
COLCAM PAL-B |
Color CCD Video Camera (240 V, British plug) |
|
|
|
|
|
|
COLCAM PAL-Z |
Color CCD Video Camera (240 V, Euro plug) |
|
|
|
|
|
|
CPVC4050G |
Carbon Wire, PVC Coated (green), 0.040 in. (1.0 mm), 50 ft (15 m) |
|
|
|
|
|
|
CPVC4050R |
Carbon Wire, PVC Coated (red), 0.040 in. (1.0 mm), 50 ft (15 m) |
|
|
|
|
|
|
CPVC4050W |
Carbon Wire, PVC Coated (white), 0.040 in. (1.0 mm), 50 ft (15 m) |
|
|
|
|
|
|
CPVC4050Y |
Carbon Wire, PVC Coated (yellow), 0.040 in. (1.0 mm), 50 ft (15 m) |
|
|
|
|
|
|
CU7T44G |
Copper Alloy Wire, Nylon/Polyurethane Coated, 0.010" (0.20 mm), 16.5 ft
(5 m) |
|
|
|
|
|
|
CUV1022-10 |
Optical Glass Cuvettes, 12.4 x 12.4 x 45mm, 3.5ml (pkg 10) |
|
|
|
|
|
|
CUV2011-1 |
Quartz Cuvettes, Style B, 7.4 x 12.4 x 45mm, 1.7ml |
|
|
|
|
|
|
CUV2012-1 |
Quartz Cuvettes, Style C, 12.4 x 12.4 x 45mm, 3.5ml |
|
|
|
|
|
|
CUV2031-1 |
Quartz Cuvettes, Style D, 12.4 x 12.4 x 45mm, 1.0ml |
|
|
|
|
|
|
CUV2032-1 |
Quartz Cuvettes, Style D, 12.4 x 12.4 x 45mm, 0.75ml |
|
|
|
|
|
|
CUV2033-1 |
Quartz Cuvettes, Style D, 12.4 x 12.4 x 45mm, 0.5ml |
|
|
|
|
|
|
CUV2034-1 |
Quartz Cuvettes, Style D, 12.4 x 12.4 x 45mm, 0.2ml |
|
|
|
|
|
|
CUV2051-1 |
Quartz Cuvettes, Style A, 12.4 x 12.4 x 45mm, 3.8ml |
|
|
|
|
|
|
CUV2052-1 |
Quartz Cuvettes, Style A, 12.4 x 12.4 x 45mm, 1.0ml |
|
|
|
|
|
|
CUV2061-1 |
Quartz Cuvettes, Style E, 12.4 x 12.4 x 45mm, 0.07ml |
|
|
|
|
|
|
CUV2062-1 |
Quartz Cuvettes, Style F, 12.4 x 12.4 x 45mm, 0.48ml |
|
|
|
|
|
|
CUV2071-1 |
Quartz Cuvettes, Style G, 102.5 x d22, 28ml |
|
|
|
|
|
|
CUV-ALL |
4-way cuvette holder |
|
|
|
|
|
|
CUV-MSP |
Mirrored Screw Plugs |
|
|
|
|
|
|
CUV-UV |
Cuvette holder for UV/VIS/NIR, 1cm |
|
|
|
|
|
|
CUV-UV-10 |
Cuvette holder for UV/VIS/NIR, 10cm |
|
|
|
|
|
|
CUV-UV-FL |
Cuvette holder with Fluorescence Option |
|
|
|
|
|
|
D2H |
Deuterium Halogen Light Source (215nm-1700nm) |
|
|
|
|
|
|
D2H-2 |
Deuterium Halogen Light Source (190nm-1700nm) |
|
|
|
|
|
|
D2H-DB |
Deuterium Replacement Lamp (>215nm) |
|
|
|
|
|
|
D2H-HB |
Halogen Replacement Lamp |
|
|
|
|
|
|
D2H-HBER |
Deuterium Replacement Lamp (>190nm) |
|
|
|
|
|
|
D2LITE-B |
D2Lite (240V, UK plug) |
|
|
|
|
|
|
D2LITE-R |
Replacement Lamp |
|
|
|
|
|
|
D2LITE-Y |
D2Lite (120V, US plug) |
|
|
|
|
|
|
D2LITE-Z |
D2Lite (240V, Euro plug) |
|
|
|
|
|
|
DAM50 |
Bio-amplifier |
|
|
|
|
|
|
DAM80 |
Bio-amplifier with active probe (DAM80P) |
|
|
|
|
|
|
DAM80P |
Replacement Probe |
|
|
|
|
|
|
DBA8000 |
Digital Bridge Amplifier |
|
|
|
|
|
|
DC3001L |
Motorized Manipulator, left-handed |
|
|
|
|
|
|
DC3001R |
Motorized Manipulator, right-handed |
|
|
|
|
|
|
DC3314L |
Manipulator (left-handed) & MS314 Controller |
|
|
|
|
|
|
DC3314R |
Manipulator (right-handed) & MS314 Controller |
|
|
|
|
|
|
DCAP |
Small Animal Guillotine (1.5" x 1.5") |
|
|
|
|
|
|
DCAP-L |
Large Animal Guillotine (4" x 4") |
|
|
|
|
|
|
DCAP-M |
Medium Animal Guillotine (2.5" x 2.5") |
|
|
|
|
|
|
18/dec |
Digital Eyepiece Camera |
|
|
|
|
|
|
DIP-NIR |
DipTip™ for VIS/NIR Spectroscopy (2, 5 and 10mm path) |
|
|
|
|
|
|
DIP-UV |
DipTip™ for UV/VIS Spectroscopy (2, 5 and 10mm path) |
|
|
|
|
|
|
DIP-UV-SR |
DipTip™ for VIS/UV Spectroscopy (2, 5 and 10mm path) |
|
|
|
|
|
|
DLS100 |
Digital Linear Stimulus Isolator |
|
|
|
|
|
|
DMF1000-1 |
Complete Microforge, including H602 Stereo Microscope (110 v) |
|
|
|
|
|
|
DMF1000-2 |
Complete Microforge, including H602 Stereo Microscope (220 v) |
|
|
|
|
|
|
DMF1000-H4 |
Replacement heating filament (small gauge) |
|
|
|
|
|
|
DMF1000-H5 |
Replacement heating filament (large gauge) |
|
|
|
|
|
|
DMF1000-M1 |
Microforge with 40x long working distance objective only |
|
|
|
|
|
|
DMF1000-M2 |
Microforge with 40x long working distance objective only |
|
|
|
|
|
|
DMF-UPGRADE |
Converts MF200 to DMF1000 |
|
|
|
|
|
|
DMP |
Manual Microsyringe Pump with Digital Display |
|
|
|
|
|
|
DRIREF-2 |
Dri-Ref, 2 mm diam. |
|
|
|
|
|
|
DRIREF-2SH |
Dri-Ref, 2 mm diam. (Short) |
|
|
|
|
|
|
DRIREF-450 |
Micro-Dri-Ref, 450 µm diam. |
|
|
|
|
|
|
DRIREF-5 |
Dri-Ref, 4.7 mm diam. |
|
|
|
|
|
|
DRIREF-5SH |
Dri-Ref, 4.7 mm diam. (Short) |
|
|
|
|
|
|
DRIREF-L |
Reference Electrode with Luer Tip |
|
|
|
|
|
|
DRL |
Dummy Load Resistor Kit (0.1 K , 1 k , 10 K ) |
|
|
|
|
|
|
DS8000 |
8-Channel Digital Stimulator |
|
|
|
|
|
|
DSPL |
Displacement Transducer |
|
|
|
|
|
|
DVC-1000 |
2-Channel Voltage/Current Clamp |
|
|
|
|
|
|
DVC2 |
Replacement Dummy Membrane for DVC1000 |
|
|
|
|
|
|
DVC3 |
Replacement Pre-Amplifier for DVC1000 |
|
|
|
|
|
|
E10 |
Eagle Pipetter, 0.5-10 µl |
|
|
|
|
|
|
E100 |
Eagle Pipetter, 20-100 µl |
|
|
|
|
|
|
E1000 |
Eagle Pipetter, 100-1000 µl |
|
|
|
|
|
|
E2 |
Eagle Pipetter, 0.2-2 µl |
|
|
|
|
|
|
E20 |
Eagle Pipetter, 2-20 µl |
|
|
|
|
|
|
E200 |
Eagle Pipetter, 50-200 µl |
|
|
|
|
|
|
E210 |
Storage Jar for 1.0mm OD Micropipettes |
|
|
|
|
|
|
E212 |
Storage Jar for 1.2mm OD Micropipettes |
|
|
|
|
|
|
E215 |
Storage Jar for 1.5mm OD Micropipettes |
|
|
|
|
|
|
E220 |
Storage Jar for 2.0mm OD Micropipettes |
|
|
|
|
|
|
E5000 |
Eagle Pipetter, 1000-5000 µl |
|
|
|
|
|
|
EHB1 |
Holder, Straight, Male, Wire, No Port, N/A |
|
|
|
|
|
|
EHBF |
Holder, Straight, Female, Wire, No Port, N/A |
|
|
|
|
|
|
EJA |
Replacement Lamp, 150W |
|
|
|
|
|
|
EK1 |
Ussing Electrode Kit (2 voltage, 2 current) |
|
|
|
|
|
|
EKC |
Extra Ussing Current Electrode, red (each) |
|
|
|
|
|
|
EKV |
Extra Ussing Voltage Electrode, blue (each) |
|
|
|
|
|
|
EL203 |
Disposable Ag/AgCl Snap Electrode (30 Pack) |
|
|
|
|
|
|
EL204 |
BetterSkin Electrodes, 7mm OD, 4mm sensor diameter |
|
|
|
|
|
|
EL204D |
BetterSkin Electrodes, 7mm OD, 4mm sensor diameter, 1.5mm din socket |
|
|
|
|
|
|
EL204S |
BetterSkin Electrodes, 7mm OD, 4mm sensor diameter, shielded, grounded |
|
|
|
|
|
|
EL208 |
BetterSkin Electrodes, 13mm OD, 8mm sensor diameter |
|
|
|
|
|
|
EL208D |
BetterSkin Electrodes, 13mm OD, 8mm sensor diameter, 1.5mm din socket |
|
|
|
|
|
|
EL208WD |
BetterSkin Electrodes, 16mm OD, 8mm sensor diameter, 1.5mm din socket |
|
|
|
|
|
|
EL208WS |
BetterSkin Electrodes, 13mm OD, 8mm sensor diameter, shielded, grounded |
|
|
|
|
|
|
EL212 |
BetterSkin Electrodes, 19mm OD, 12mm sensor diameter, shielded |
|
|
|
|
|
|
EL212S |
BetterSkin Electrodes, 19mm OD, 12mm sensor diameter, shielded, grounded |
|
|
|
|
|
|
ELS-370 |
ELS Module (370 nm) |
|
|
|
|
|
|
ELS-xxx |
External Light Source Module (specify wavelength) |
|
|
|
|
|
|
ENDOHM-12 |
Endohm for 12 mm culture cup |
|
|
|
|
|
|
ENDOHM-24SNAP |
Endohm for 24 mm & Costar Snapwell™ cup |
|
|
|
|
|
|
ENDOHM-6 |
Endohm for 6 mm culture cup |
|
|
|
|
|
|
EP05 |
Ag/AgCl Electrode 0.5 mm diam x 8 mm |
|
|
|
|
|
|
EP08 |
Ag/AgCl Electrode 0.8 mm diam x 8 mm |
|
|
|
|
|
|
EP1 |
Ag/AgCl Electrode 1.0 mm diam x 2.5 mm |
|
|
|
|
|
|
EP12 |
Ag/AgCl Electrode 12.0 mm diam x 1 mm |
|
|
|
|
|
|
EP2 |
Ag/AgCl Electrode 2.0 mm diam x 4 mm |
|
|
|
|
|
|
EP4 |
Ag/AgCl Electrode 4.0 mm diam x 1 mm |
|
|
|
|
|
|
EP8 |
Ag/AgCl Electrode 8.0 mm diam x 1 mm |
|
|
|
|
|
|
ES5 |
Eagle Pipetters (set of any 5) and Stand 14239 |
|
|
|
|
|
|
ES6 |
Eagle Pipetters (set of any 6) and Stand 14239 |
|
|
|
|
|
|
ES7 |
Eagle Pipetters (set of any 7) and Stand 14239 |
|
|
|
|
|
|
EVC3 |
Preamplifier Module for EVC4000 series |
|
|
|
|
|
|
EVC4000 |
Voltage Clamp & EVC3 Preamplifier |
|
|
|
|
|
|
EVC4000-1 |
1-Channel Voltage Clamp & preamp |
|
|
|
|
|
|
EVC4000-2 |
2-Channel Voltage Clamp & preamps |
|
|
|
|
|
|
EVC4000-3 |
3-Channel Voltage Clamp & preamps |
|
|
|
|
|
|
EVC4000-4 |
4-Channel Voltage Clamp & preamps |
|
|
|
|
|
|
EVOM |
Epithelial Tissue Voltohmmeter (includes STX-2 electrode set) |
|
|
|
|
|
|
EVOMX |
EVOM with switch adaptation for multi-well testing |
|
|
|
|
|
|
EXT-6 |
Probe extension lead, 180cm long |
|
|
|
|
|
|
FD35-100 |
FluoroDish Sterile Culture Dish, clear wall, 35 mm, 23 mm well, box of
100 |
|
|
|
|
|
|
FD3510-100 |
FluoroDish Sterile Culture Dish, clear wall, 35 mm, 10 mm well, low
sidewall, box of 100 |
|
|
|
|
|
|
FD3510B-100 |
FluoroDish Sterile Culture Dish, black wall, 35 mm, 10 mm well, low
sidewall, box of 100 |
|
|
|
|
|
|
FD35B-100 |
FluoroDish Sterile Culture Dish, black wall, 35 mm, 23 mm well, box of
100 |
|
|
|
|
|
|
FD35COL-100 |
FluoroDish Sterile Culture Dish, 35mm, box/100 |
|
|
|
|
|
|
FD35PDL-100 |
FluoroDish Sterile Culture Dish, Poly-lysine Coated, 35mm, box/100 |
|
|
|
|
|
|
FD5040-100 |
FluoroDish Sterile Culture Dish, clear wall, 50 mm, 35 mm well, box of
100 |
|
|
|
|
|
|
FD5040B-100 |
FluoroDish Sterile Culture Dish, black wall, 50 mm, 35 mm well, box of
100 |
|
|
|
|
|
|
FLEXREF |
Flexible Dri-Ref, 1.5 mm diam. |
|
|
|
|
|
|
FO-1000-SMA |
Fiber Optic Cable, 3 m, SMA, 1000 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-1000-SMA1M |
Fiber Optic Cable, 1 m, SMA, 1000 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-100-SMA |
Fiber Optic Cable, 3 m, SMA, 100 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-100-SMA1M |
Fiber Optic Cable, 1 m, SMA, 100 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-200AS-SMA |
Fiber Optic Cable, 1 m, SMA, 200 µm Core, Anti-Solarization |
|
|
|
|
|
|
FO-200-SMA |
Fiber Optic Cable, 3 m, SMA, 200 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-200-SMA1M |
Fiber Optic Cable, 1 m, SMA, 200 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-400AS-SMA |
Fiber Optic Cable, 1 m, SMA, 400 µm Core, Anti-Solarization |
|
|
|
|
|
|
FO-400-SMA |
Fiber Optic Cable, 3 m, SMA, 400 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-400SMA/ST |
Fiber optic cable, 1 m, SMA/ST connector, 400 µm core, UV-Enhanced |
|
|
|
|
|
|
FO-400-SMA1M |
Fiber Optic Cable, 1 m, SMA, 400 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-50-SMA |
Fiber Optic Cable, 3 m, SMA, 50 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-50-SMA1M |
Fiber Optic Cable, 1 m, SMA, 50 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-6000 |
High Color Temperature Tungsten Light Source |
|
|
|
|
|
|
FO-6000FILT |
In-line Filter Holder Assembly for FO-6000 |
|
|
|
|
|
|
FO-600AS-SMA |
Fiber Optic Cable, 1 m, SMA, 600 µm Core, Anti-Solarization |
|
|
|
|
|
|
FO-600-SMA |
Fiber Optic Cable, 3 m, SMA, 600 µm Core, UV-Enhanced |
|
|
|
|
|
|
FO-600-SMA1M |
Fiber Optic Cable, 1 m, SMA, 600 µm Core, UV-Enhanced |
|
|
|
|
|
|
FOBPS-13 |
FO BLOOD PRESSURE SENSOR 1.3F |
|
|
|
|
|
|
FOBPS-13LG |
FO BLOOD PRESSURE SENSOR 1.3F, 60ft |
|
|
|
|
|
|
FOBPS-18 |
Fiber Optic Blood Pressure Sensor, 350µm (1.7F) |
|
|
|
|
|
|
FOBPS-18LG |
Fiber Optic Blood Pressure Sensor, 350µm (1.7F), 60FT |
|
|
|
|
|
|
FOBPS-28 |
Fiber Optic Blood Pressure Sensor, 914µm (2.8F) |
|
|
|
|
|
|
FOBPS-28LG |
Fiber Optic Blood Pressure Sensor, 914µm (2.8F), 60FT |
|
|
|
|
|
|
FOIMPH |
Fiber Optic Illuminated Micropipette Holder |
|
|
|
|
|
|
FOIMPH-LF |
Fiber Optic Illuminated Micropipette Holder with Luer Port |
|
|
|
|
|
|
FOMS |
Fiber Optic Measurement System (1000Hz sampling rate) |
|
|
|
|
|
|
FOMS-13 |
Fibre Optic Measurement System with FOBPS-13 Sensor |
|
|
|
|
|
|
FOP1-SMA |
Plastic Fiber Optic Cable, SMA connectors, 1 mm x 2 m |
|
|
|
|
|
|
FOP1-SMA/ST |
Plastic Fiber Optic Cable, ST/SMA connectors, 1 mm x 2 m |
|
|
|
|
|
|
FOP1-ST |
Plastic Fiber Optic Cable, ST connectors, 1 mm x 2 m |
|
|
|
|
|
|
FORT100 |
Force Transducer, 100 g |
|
|
|
|
|
|
FORT1000 |
Force Transducer, 1000 g |
|
|
|
|
|
|
FORT10-100 |
Force Transducer (10g and 100g) |
|
|
|
|
|
|
FORT25 |
Force Transducer (25g) |
|
|
|
|
|
|
FORT250 |
Force Transducer, 250 g |
|
|
|
|
|
|
FORT5000 |
Force Transducer, 5000 g |
|
|
|
|
|
|
GEL100 |
Conductive Electrode Gel |
|
|
|
|
|
|
GN-NET25 |
Pump to pump network cable, 25 ft |
|
|
|
|
|
|
GN-NET7 |
Pump to pump network cable, 7 ft |
|
|
|
|
|
|
GN-PC25 |
PC to pump cable, 25 ft |
|
|
|
|
|
|
GN-PC7 |
PC to pump cable, 7 ft |
|
|
|
|
|
|
GN-TTL |
Pump to pump reciprocating cable |
|
|
|
|
|
|
GO1-100 |
Replacement Gasket 1.0mm (Pkg 100) |
|
|
|
|
|
|
GO2-100 |
Replacement Gasket 1.2mm (Pkg 100) |
|
|
|
|
|
|
GO3-100 |
Replacement Gasket 1.5mm (Pkg 100) |
|
|
|
|
|
|
GO4-100 |
Replacement Gasket 2.0mm (Pkg 100) |
|
|
|
|
|
|
GR100-4 |
Glass Rod, 1 mm x 4" (102 mm), Pkg/500 |
|
|
|
|
|
|
GR100-6 |
Glass Rod, 1 mm x 6" (152 mm), Pkg/500 |
|
|
|
|
|
|
GRNK |
Griess Reaction Nitrite Kit (100 - 500 nitrite tests) |
|
|
|
|
|
|
GRNK-11 |
GRNK + NITRALYZER-II (100 - 500 nox tests) |
|
|
|
|
|
|
GSH-KIT |
Total Glutathione Determination Kit |
|
|
|
|
|
|
GSNO-100 |
GSNO 100 mg vial |
|
|
|
|
|
|
GSNO-50 |
GSNO 50 mg vial |
|
|
|
|
|
|
GSNO-500 |
GSNO 500 mg vial |
|
|
|
|
|
|
H602 |
1000x Binocular Microscope (120 V) |
|
|
|
|
|
|
H602-240 |
1000x Binocular Microscope (240 V) |
|
|
|
|
|
|
HS6 |
Micromanipulator |
|
|
|
|
|
|
HS6-3 |
High Resolution Motorized HS6 Micromanipulator & Controller |
|
|
|
|
|
|
HS6-3M |
High Resolution Motorized HS6 Micromanipulator |
|
|
|
|
|
|
HT-2 |
General Purpose workhorse probe, shaft 9", 5ft |
|
|
|
|
|
|
IE010 |
Hydrogen Ion Exchanger (0.1 ml) |
|
|
|
|
|
|
IE190 |
Potassium Ion Exchanger (1.0 ml) |
|
|
|
|
|
|
IE200 |
Calcium Neutral Ion Exchanger (0.1 ml) |
|
|
|
|
|
|
ILS005LT |
Syringe, Gas-tight, Luer Fitting (no needle), 5 µl ILS |
|
|
|
|
|
|
ILS010LT |
Syringe, Gas-tight, Luer Fitting (no needle), 10 µl ILS |
|
|
|
|
|
|
ILS025LT |
Syringe, Gas-tight, Luer Fitting (no needle), 25 µl ILS |
|
|
|
|
|
|
ILS025TLL |
Syringe, Gas-tight, Teflon, Luer Lock (no needle), 25 µl ILS |
|
|
|
|
|
|
ILS050TLL |
Syringe, Gas-tight, Teflon, Luer Lock (no needle), 50 µl ILS |
|
|
|
|
|
|
ILS100TLL |
Syringe, Gas-tight, Teflon, Luer Lock (no needle), 100 µl ILS |
|
|
|
|
|
|
ILS250TLL |
Syringe, Gas-tight, Teflon, Luer Lock (no needle), 250 µl ILS |
|
|
|
|
|
|
ILS500TLL |
Syringe, Gas-tight, Teflon, Luer Lock (no needle), 500 µl ILS |
|
|
|
|
|
|
IN1003 |
Indium Wire, 0.01" (0.25 mm), 3 ft (92 cm) |
|
|
|
|
|
|
INST-APOLLO |
Installation & Training |
|
|
|
|
|
|
INTEGRASLICE-M |
Motorized and Manual Control Vibroslice |
|
|
|
|
|
|
INTEGRASLICE-P |
Programmable Vibroslice |
|
|
|
|
|
|
INV-IQ902 |
Binocular Inverted Microscope, BF, PH, POL |
|
|
|
|
|
|
INV-IQ902DIC |
Binocular Inverted Microscope, BF, PH, POL,DIC |
|
|
|
|
|
|
INV-IQ903 |
Trinocular Inverted Microscope, BF, PH, POL |
|
|
|
|
|
|
INV-IQ903DIC |
Trinocular Inverted Microscope, BF, PH, POL, DIC |
|
|
|
|
|
|
IO-KIT |
Intraocular (IO) injection kit (SilFlex tubing, holder, gasket, and
beveled tipmix) |
|
|
|
|
|
|
IRM23E01 |
Electrode, Iridium, 0.1M 50mm |
|
|
|
|
|
|
IRM23E01KT |
Electrode, Iridium, 0.1M ohm KT |
|
|
|
|
|
|
IRM23E05 |
Electrode, Iridium, 0.5M ohm, 50mm |
|
|
|
|
|
|
IRM23E05KT |
50 mm 3 µ 0.180 mm 0.5 MŮ 2-3 µ Single and multiunit recording and
stimulation |
|
|
|
|
|
|
IRM23E10 |
Electrode, Iridium, 1.0M ohm, 50mm |
|
|
|
|
|
|
IRM23E10KT |
Electrode, Iridium, 1.0M ohm, KT |
|
|
|
|
|
|
IRM23E15 |
Electrode, Iridium, 1.5M ohm, 50mm |
|
|
|
|
|
|
IRM23E15KT |
Electrode, Iridium, 1.5M ohm, KT |
|
|
|
|
|
|
IRM23E20 |
Electrode, Iridium, 2.0M ohm, 50mm |
|
|
|
|
|
|
IRM23E20KT |
Electrode, Iridium 2.0M ohm, KT |
|
|
|
|
|
|
IRM23E25 |
Electrode, Iridium 2.5M ohm, 50mm |
|
|
|
|
|
|
IRM23E25KT |
Electrode, Iridium 2.5M ohm, KT |
|
|
|
|
|
|
IRM23E30 |
Electrode, Iridium 3.0M ohm, 50mm |
|
|
|
|
|
|
IRM23E30KT |
Electrode, Iridium 3.0M ohm, KT |
|
|
|
|
|
|
IRM23E50 |
Electrode, Iridium 5.0M ohm, 50mm |
|
|
|
|
|
|
IRM23E50KT |
Electrode, Iridium 5.0M ohm, KT |
|
|
|
|
|
|
ISDB-1 |
Bio-amplifier System (1 Channel) |
|
|
|
|
|
|
ISDB-2 |
Bio-amplifier System (2 Channels) |
|
|
|
|
|
|
ISDB-3 |
Bio-amplifier System (3 Channels) |
|
|
|
|
|
|
ISDB-4 |
Bio-amplifier System (4 Channels) |
|
|
|
|
|
|
ISDB-5 |
Bio-amplifier System (5 Channels) |
|
|
|
|
|
|
ISDB-6 |
Bio-amplifier System (6 Channels) |
|
|
|
|
|
|
ISDB-7 |
Bio-amplifier System (7 Channels) |
|
|
|
|
|
|
ISDB-8 |
Bio-amplifier System (8 Channels) |
|
|
|
|
|
|
ISO2 |
Dissolved Oxygen Meter & Electrode |
|
|
|
|
|
|
ISO-80 |
Isolated Bio-amplifier with active probe (ISO-80P) |
|
|
|
|
|
|
ISO80P |
Replacement ISO-80 Probe |
|
|
|
|
|
|
ISODAM |
Iso-DAM Low Noise Preamplifier |
|
|
|
|
|
|
ISODAMX |
Iso-DAM Low Noise Preamplifier, with power supply |
|
|
|
|
|
|
ISO-H2S100 |
Hydrogen Sulfide Sensor, 100 microns |
|
|
|
|
|
|
ISO-H2S100H |
Hydrogen Sulfide Sensor with hypodermic sheath |
|
|
|
|
|
|
ISO-H2S100L |
Hydrogen Sulfide Sensor, L-shaped |
|
|
|
|
|
|
ISO-H2S2 |
2mm Hydrogen Sulfide Sensor |
|
|
|
|
|
|
ISO-HPO-100 |
100um HPO Sensor, pkg of 3 (requires 15810) |
|
|
|
|
|
|
ISO-HPO100H |
Hydrogen Peroxide Sensor with hypodermic sheath |
|
|
|
|
|
|
ISO-HPO-100-L |
L-shaped 100µm HPO Sensor, pkg 2 |
|
|
|
|
|
|
ISO-HPO-2 |
2mm Shielded HPO Sensor & Cable |
|
|
|
|
|
|
ISO-NOP |
Replacement 2 mm shielded sensor and cable |
|
|
|
|
|
|
ISO-NOP007 |
7µm Nitric Oxide Sensor, pkg of 3 |
|
|
|
|
|
|
ISO-NOP3005 |
Nitric Oxide Sensor, 30 microns |
|
|
|
|
|
|
ISO-NOP3020 |
Nitric Oxide Sensor, 30 microns |
|
|
|
|
|
|
ISO-NOP-70-L |
L-shaped NO Sensor, 70µm (pkg of 2) |
|
|
|
|
|
|
ISO-NOPF100 |
100µm Flexible NO Sensor, pkg 2 |
|
|
|
|
|
|
ISO-NOPF200 |
200µm Flexible NO Sensor, pkg 2 |
|
|
|
|
|
|
ISO-NOPFH |
Nitric Oxide Sensor with hypodermic sheath |
|
|
|
|
|
|
ISO-NOPNM |
100nm NanoSensor, pkg of 3 |
|
|
|
|
|
|
ISO-OXY-100 |
100µm Oxygen Sensor, pkg 3 |
|
|
|
|
|
|
ISO-OXY-100H |
100um Oxygen Sensor w/Hypodermic Sheath |
|
|
|
|
|
|
ISO-OXY-100-L |
L-shaped 100µm Oxygen Sensor, pkg 2 |
|
|
|
|
|
|
ISO-OXY-2 |
2mm Shielded Oxygen Sensor & Cable |
|
|
|
|
|
|
IT-14 |
Flexible Implantable Probe, 0.050" diameter, 3ft |
|
|
|
|
|
|
IT-18 |
Flexible Implantable Probe, 0.025" diameter, 3ft |
|
|
|
|
|
|
IT-18EXLONG |
Flexible Implantable Probe, 0.025" diameter, 30ft, for MRI |
|
|
|
|
|
|
IT-1E |
Flexible Implantable Probe, 0.025" diameter, 3ft, sensor bead exposed |
|
|
|
|
|
|
IT-21 |
Flexible Implantable Probe, 0.016" diameter, 1ft |
|
|
|
|
|
|
IT-23 |
Flexible Implantable Probe, 0.009" diameter, 3ft |
|
|
|
|
|
|
JE671P |
pH Meter, pH Electrode, Temp Probe, 110V AC Adapter |
|
|
|
|
|
|
JE671PZ |
pH Meter, pH Electrode, Temp Probe, 220V AC Adapter |
|
|
|
|
|
|
JUV |
ISO-NOP Rejuvenator |
|
|
|
|
|
|
KITE-L |
Kite Manipulator (left-handed) |
|
|
|
|
|
|
KITE-R |
Kite Manipulator (right-handed) |
|
|
|
|
|
|
KITE-TB-L |
KITE-L with TB-1 |
|
|
|
|
|
|
KITE-TB-R |
KITE-R with TB-1 |
|
|
|
|
|
|
KITLWCC |
LWCC Start-up Kit (incl: FO-400-SMA1M (2), 58006, 501609) |
|
|
|
|
|
|
KIT-PHYSIO-I |
Physiology Kit I |
|
|
|
|
|
|
KWIK-2 |
Electrode Holder with BNC cable |
|
|
|
|
|
|
KWIKCAL-2 |
Holder & 3 Calcium Electrodes |
|
|
|
|
|
|
KWIK-CAST |
Silicone Casting Compound (two 4ml syringes) |
|
|
|
|
|
|
KWIKGARD |
KWIKGARD Start-up Kit (incl disnpenser, cartridge, 5 tips) |
|
|
|
|
|
|
KWIKGLUE |
KWIKGARD Refill (2 cartridges, 10 dispensing tips) |
|
|
|
|
|
|
KWIKGUN |
KWIKGARD Dispenser |
|
|
|
|
|
|
KWIKH-2 |
Holder & 3 Hydrogen Electrodes |
|
|
|
|
|
|
KWIKMIX |
Dispensing Tip (pkg 10) |
|
|
|
|
|
|
KWIKPOT-2 |
Holder & 3 Potassium Electrodes |
|
|
|
|
|
|
KWIK-SIL |
Silicone Adhesive Compound (two 4ml syringes) |
|
|
|
|
|
|
KWIKTPP-2 |
Holder & 3 TPP (Tetraphenylphosphonium) Electrodes |
|
|
|
|
|
|
L2 |
Low light upgrade: Detector collector lens for USB/S2000 (per channel) |
|
|
|
|
|
|
L-32-32 |
Lens for SI-40-8 & SI-72-8 |
|
|
|
|
|
|
LABCOAT-L |
Lab Coat, Large |
|
|
|
|
|
|
LABCOAT-M |
Lab Coat, Medium |
|
|
|
|
|
|
LABCOAT-S |
Lab Coat, Small |
|
|
|
|
|
|
LABCOAT-XL |
Lab Coat, Extra Large |
|
|
|
|
|
|
LABCOAT-XS |
Lab Coat, Extra Small |
|
|
|
|
|
|
LAB-TRAX-4 |
4-Channel Data Acquisition System |
|
|
|
|
|
|
LAB-TRAX-424T |
4-Channel Data Acq Sys w/ Transducer Amps |
|
|
|
|
|
|
LAB-TRAX-8 |
8-Channel Data Acquisition System |
|
|
|
|
|
|
LED-LITE |
Power Supply, transformer, AC adapter (requires ELS module) |
|
|
|
|
|
|
LPF-30 |
Lo Pass Filter |
|
|
|
|
|
|
LUME |
Photocell |
|
|
|
|
|
|
LV140-Y |
Vacuum Pump (120 V) |
|
|
|
|
|
|
LWCC-2002 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 2
cm |
|
|
|
|
|
|
LWCC-2005 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 5
cm |
|
|
|
|
|
|
LWCC-2010 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 10
cm |
|
|
|
|
|
|
LWCC-2050 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 50
cm |
|
|
|
|
|
|
LWCC-2100 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 100
cm |
|
|
|
|
|
|
LWCC-2200 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 200
cm |
|
|
|
|
|
|
LWCC-2500 |
LWCC Type II Fused silica tubing coated with Teflon AF, pathlength = 500
cm |
|
|
|
|
|
|
M1 |
Magnetic Stand |
|
|
|
|
|
|
M10 |
Magnetic Stand |
|
|
|
|
|
|
M10L |
Magnetic Stand |
|
|
|
|
|
|
M11 |
Magnetic Stand |
|
|
|
|
|
|
M1L |
Magnetic Stand |
|
|
|
|
|
|
M2 |
Additional 12 mm Clamp |
|
|
|
|
|
|
M-3 |
80°Tilting Base |
|
|
|
|
|
|
M325 |
3-Axis Fine Controlled Manual Micromanipulator |
|
|
|
|
|
|
M3301EH |
Replacement Electrode Holder (14 cm long) |
|
|
|
|
|
|
M3301L |
Manual Manipulator, left-handed |
|
|
|
|
|
|
M3301-M3-L |
M3301L with M-3 |
|
|
|
|
|
|
M3301-M3-R |
M3301R with M-3 |
|
|
|
|
|
|
M3301R |
Manual Manipulator, right-handed |
|
|
|
|
|
|
M4C |
Microscope Stage Adapter |
|
|
|
|
|
|
M5 |
Additional 10 mm Clamp |
|
|
|
|
|
|
M6 |
Additional ˝" Clamp |
|
|
|
|
|
|
M7 |
Compact Magnetic Stand, 30 x 35 x 35 mm |
|
|
|
|
|
|
M8 |
Magnetic Stand |
|
|
|
|
|
|
M9 |
Magnetic Stand |
|
|
|
|
|
|
MAX3820 |
Coaxial, Tinned Copper Alloy, 0.44mm, 20ft |
|
|
|
|
|
|
MAX4020 |
Twin Coaxial, Tinned Copper Alloy, 0.4x0.61mm, 20ft |
|
|
|
|
|
|
MB2 |
Compact Magnetic Stand |
|
|
|
|
|
|
MBMPH5-7 |
Holder for P-5 & P-7 pipettes |
|
|
|
|
|
|
MBS |
Microbeveler System |
|
|
|
|
|
|
MCL3 |
Controller with Joystick & software for SM325-M |
|
|
|
|
|
|
MCL3-HS6 |
Controller with Joystick and software for HS6-3M |
|
|
|
|
|
|
MCL3-SM325 |
Controller with Joystick and software for SM325-M |
|
|
|
|
|
|
MD4L |
Double-Holder Micromanipulator (left) |
|
|
|
|
|
|
MD4-M3-L |
MD4L with M-3 |
|
|
|
|
|
|
MD4-M3-R |
MD4R with M-3 |
|
|
|
|
|
|
MD4R |
Double-Holder Micromanipulator (right) |
|
|
|
|
|
|
MEH145 |
Holder, 45°, Male, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH14512 |
45°Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH14515 |
45°Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH14520 |
45°Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1F45 |
Holder, 45°, Female, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH1F4512 |
45°Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1F4515 |
45°Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1F4520 |
45°Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1R |
Holder, Right, Male, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH1R12 |
Right Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1R15 |
Right Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1R20 |
Right Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1RF |
Holder, Right, Female, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH1RF12 |
Right Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1RF15 |
Right Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1RF20 |
Right Female Pellet No Port No Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH1S |
Holder, Straight, Male, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH1S12 |
Straight Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1S15 |
Straight Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1S20 |
Straight Male Pellet No Port No Cap |
|
|
|
|
|
|
MEH1SF |
Holder, Straight, Female, Pellet, No Port, No Cap |
|
|
|
|
|
|
MEH1SF12 |
Microelectrode holder |
|
|
|
|
|
|
MEH1SF15 |
Microelectrode holder |
|
|
|
|
|
|
MEH1SF20 |
Microelectrode holder |
|
|
|
|
|
|
MEH2R |
Holder, Right, Male, Pellet, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2R12 |
Right Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2R15 |
Right Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2R20 |
Right Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2RF |
Holder, Right, Female, Pellet, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2RF12 |
Right Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RF15 |
Right Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RF20 |
Right Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RFW |
Holder, Right, Female, Wire, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2RFW12 |
Right Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RFW15 |
Right Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RFW20 |
Right Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2RW |
Holder, Right, Male, Wire, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2RW12 |
Right Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH2RW15 |
Right Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH2RW20 |
Right Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH2S |
Holder, Straight, Male, Pellet, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2S12 |
Straight Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2S15 |
Straight Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2S20 |
Straight Male Pellet Male Luer w/Cap |
|
|
|
|
|
|
MEH2SF |
Holder, Straight, Female, Pellet, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2SF12 |
Straight Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SF15 |
Straight Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SF20 |
Straight Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SFW |
Holder, Straight, Female, Wire, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2SFW12 |
Straight Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SFW15 |
Straight Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SFW20 |
Straight Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH2SW |
Holder, Straight, Male, Wire, Male Luer, w/Cap |
|
|
|
|
|
|
MEH2SW12 |
Straight Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH2SW15 |
Straight Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH2SW20 |
Straight Male Wire Male Luer w/Cap |
|
|
|
|
|
|
MEH345 |
Holder, 45°, Male, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH34512 |
45°Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH34515 |
45°Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH34520 |
45°Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3F45 |
Holder, 45°, Female, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3F4512 |
45°Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3F4515 |
45°Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3F4520 |
45°Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3FW45 |
Holder, 45°, Female, Wire, Port, w/Cap |
|
|
|
|
|
|
MEH3FW4512 |
45°Female Wire Port w/Cap |
|
|
|
|
|
|
MEH3FW4515 |
45°Female Wire Port w/Cap |
|
|
|
|
|
|
MEH3FW4520 |
45°Female Wire Port w/Cap |
|
|
|
|
|
|
MEH3R |
Holder, Right, Male, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3R12 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3R15 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3R20 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3RF |
Holder, Right, Female, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3RF12 |
Right Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RF15 |
Right Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RF20 |
Right Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RFW |
Holder, Right, Female, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3RFW12 |
Right Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RFW15 |
Right Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RFW20 |
Right Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3RW |
Holder, Right, Male, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3RW12 |
Right Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3RW15 |
Right Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3RW20 |
Right Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3S |
Holder, Straight, Male, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3S12 |
Straight Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3S15 |
Straight Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3S20 |
Straight Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH3SB |
Holder, Straight, Banana, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3SB12 |
Straight Banana Pellet No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SB15 |
Straight Banana Pellet No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SB20 |
Straight Banana Pellet No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SBW |
Holder, Straight, Banana, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3SBW12 |
Straight Banana Wire No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SBW15 |
Straight Banana Wire No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SBW20 |
Straight Banana Wire No Port w/Cap ISO-80, ISO-DAM8A |
|
|
|
|
|
|
MEH3SF |
Holder, Straight, Female, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH3SF12 |
Straight Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SF15 |
Straight Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SF20 |
Straight Female Pellet No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SFW |
Holder, Straight, Female, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3SFW12 |
Straight Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SFW15 |
Straight Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SFW20 |
Straight Female Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3SW |
Holder, Straight, Male, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3SW12 |
Straight Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3SW15 |
Straight Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3SW20 |
Straight Male Wire No Port w/Cap |
|
|
|
|
|
|
MEH3W45 |
Holder, 45°, Male, Wire, No Port, w/Cap |
|
|
|
|
|
|
MEH3W4512 |
45°Male Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3W4515 |
45°Male Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH3W4520 |
45°Male Wire No Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RF |
Holder, Right, Female, Pellet, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH6RF12 |
Right Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RF15 |
Right Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RF20 |
Right Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RFW |
Holder, Right, Female, Wire, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH6RFW12 |
Right Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RFW15 |
Right Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6RFW20 |
Right Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SF |
Holder, Straight, Female, Pellet, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH6SF12 |
Straight Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SF15 |
Straight Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SF20 |
Straight Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SFW |
Holder, Straight, Female, Wire, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH6SFW12 |
Straight Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SFW15 |
Straight Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH6SFW20 |
Straight Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223 |
|
|
|
|
|
|
MEH7 |
Holder, Right, Male, Pellet, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH712 |
Right Male Pellet 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH715 |
Right Male Pellet 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH720 |
Right Male Pellet 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH7W |
Holder, Right, Male, Wire, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH7W12 |
Right Male Wire 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH7W15 |
Right Male Wire 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH7W20 |
Right Male Wire 2.0-mm Port w/Cap |
|
|
|
|
|
|
MEH8 |
Holder, Right, Male, Pellet, No Port, w/Cap |
|
|
|
|
|
|
MEH812 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH815 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH820 |
Right Male Pellet No Port w/Cap |
|
|
|
|
|
|
MEH900R |
Holder, Right, Male, Pellet, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MEH900S |
Holder, Straight, Male, Pellet, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MES |
Microelectrode Beveler System |
|
|
|
|
|
|
MF200-1 |
Complete Microforge, including H602 Stereo Microscope (110 V) |
|
|
|
|
|
|
MF200-2 |
Complete Microforge, including H602 Stereo Microscope (220 V) |
|
|
|
|
|
|
MF200-H2 |
Replacement heating filament (large gauge) |
|
|
|
|
|
|
MF200-H3 |
Replacement heating filament (medium gauge) |
|
|
|
|
|
|
MF200-H4 |
Replacement heating filament (small gauge) |
|
|
|
|
|
|
MF200-M1 |
Microforge with 40x long working distance objective only |
|
|
|
|
|
|
MF200-M2 |
Microforge with 40x long working distance objective only |
|
|
|
|
|
|
MF28G-5 |
MicroFil, 28 ga., 97 mm long (pkg of 5) |
|
|
|
|
|
|
MF28G67-5 |
MicroFil, 28 ga., 67 mm long (pkg of 5) |
|
|
|
|
|
|
MF34G-5 |
MicroFil, 34 ga., 67 mm long (pkg of 5) |
|
|
|
|
|
|
MICRO4 |
Micro4 Controller |
|
|
|
|
|
|
MICROC |
Potentiostat |
|
|
|
|
|
|
MICROCP |
Replacement Probe for MicroC |
|
|
|
|
|
|
MINISTAR |
Miniature Peristaltic Pump, 1-channel |
|
|
|
|
|
|
MITY-KIT |
Replacement Parts Kit with Rollers |
|
|
|
|
|
|
MM1 |
Mini Micropositioner, one axis, 3 mm travel |
|
|
|
|
|
|
MM1-3 |
Mini Micropositioner, three axes, 3 mm travel |
|
|
|
|
|
|
MM1-A |
Adapter for MM1 and MM1-3, mounted on magnetic Stand MB2 |
|
|
|
|
|
|
MM1-C |
Clamp for MM1 and MM1-3 |
|
|
|
|
|
|
MM3 |
Micropositioner, one axis, 13 mm travel |
|
|
|
|
|
|
MM3-3 |
Micropositioner, three axes, 13 mm travel |
|
|
|
|
|
|
MM3-A |
Adapter for MM3 and MM3-3, mounted on Magnetic Stand MB2 |
|
|
|
|
|
|
MM3-C |
Clamp for MM3 and MM3-3 |
|
|
|
|
|
|
MM3-M |
Motorized Micropositioner |
|
|
|
|
|
|
MM3-MCPRO |
Controller for MM3-M |
|
|
|
|
|
|
MM3-MSPRO |
MM3-M Micropositioner & Controller |
|
|
|
|
|
|
MMJL |
Joystick Micromanipulator (Left-Handed) |
|
|
|
|
|
|
MMJR |
Joystick Micromanipulator (Right-Handed) |
|
|
|
|
|
|
MMP |
Manual Microsyringe Pump |
|
|
|
|
|
|
MMP-KIT |
Complete Injection Assembly Kit |
|
|
|
|
|
|
MOD-BMH-BF |
Binocular, M-Stage, Brightfield |
|
|
|
|
|
|
MOD-TMH-BF-V |
Trinocular-Video, M-Stage, Brightfield |
|
|
|
|
|
|
MOUSEKIT |
Mouse Kit |
|
|
|
|
|
|
MPH1 |
Holder, None, None, Female Luer, w/Cap |
|
|
|
|
|
|
MPH3 |
Holder, None, None, Male Luer, w/Cap |
|
|
|
|
|
|
MPH4 |
Holder, None, None, 2.0mm Port, w/Cap |
|
|
|
|
|
|
MPH6P |
Holder, Right, Male, Pellet, Female Luer, w/Cap |
|
|
|
|
|
|
MPH6R |
Holder, Right, Male, Wire, Female Luer, w/Cap |
|
|
|
|
|
|
MPH6S |
Holder, None, None, Female Luer, w/Cap |
|
|
|
|
|
|
MPH8 |
Electrode Holder Adapter for MPM10 & MPM20 |
|
|
|
|
|
|
MPM10 |
Piezo Controller for DC3001 Motorized Micromanipulator |
|
|
|
|
|
|
MPM20 |
Piezo Translator |
|
|
|
|
|
|
MPS-2 |
MPS-2 with PC control software |
|
|
|
|
|
|
MS314 |
Controller for DC3001 |
|
|
|
|
|
|
MSI-150 |
Illuminator with diaphragm, filter holder (115 V, 60 Hz) |
|
|
|
|
|
|
MSI-150Z |
Illuminator with diaphragm, filter holder (230 V, 50 Hz) |
|
|
|
|
|
|
MT-23/3 |
Needle Microprobe, 23 ga, 3cm |
|
|
|
|
|
|
MT-23/5 |
Needle Microprobe, 23 ga, 5cm |
|
|
|
|
|
|
MT-23/8 |
Needle Microprobe, 23 ga, 8cm |
|
|
|
|
|
|
MT-26/2 |
Needle Microprobe, 26 ga, 2cm |
|
|
|
|
|
|
MT-26/4 |
Needle Microprobe, 26 ga, 4cm |
|
|
|
|
|
|
MT-26/6 |
Needle Microprobe, 26 ga, 6cm |
|
|
|
|
|
|
MT-29/1 |
Needle Microprobe, 29 ga, 1cm |
|
|
|
|
|
|
MT-29/1B |
Needle Microprobe, 29 ga, 1cm, Insect Probe |
|
|
|
|
|
|
MT-29/2 |
Needle Microprobe, 29 ga, 2cm |
|
|
|
|
|
|
MT-29/3 |
Needle Microprobe, 29 ga, 3cm |
|
|
|
|
|
|
MT-29/5 |
Needle Microprobe, 29 ga, 5cm |
|
|
|
|
|
|
MT-4 |
Needle Microprobe, 29 ga, 1cm, blunt tip |
|
|
|
|
|
|
MT-D |
Needle Microprobe, 29 ga, 1cm, Fast Response Surface Probe |
|
|
|
|
|
|
MULTI-96 |
Endohm for Millipore MultiScreen 96-well PAMPA Plate |
|
|
|
|
|
|
MYOBATHII-2- |
2-Channel Tissue Bath (specify tensioner, bath and holder types) |
|
|
|
|
|
|
MYOBATHII-4- |
4-Channel Tissue Bath (specify tensioner, bath and holder types) |
|
|
|
|
|
|
MYOBATHII-8- |
8-Channel Tissue Bath (specify tensioner, bath and holder types) |
|
|
|
|
|
|
NANOFIL |
NanoFil Syringe, 10 microliter |
|
|
|
|
|
|
NF33-36BL |
Assortment of 4 blunt NanoFil needles |
|
|
|
|
|
|
NF33-36BV |
Assortment of 4 beveled NanoFil needles |
|
|
|
|
|
|
NF33BL-2 |
33 G blunt NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF33BV-2 |
33 G beveled NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF33FBL-2 |
33 G Flexifil blunt NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF33FBV-2 |
33 G Flexifil beveled NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF34BL-2 |
34 G blunt NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF34BV-2 |
34 G beveled NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF35BL-2 |
35 G blunt NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF35BV-2 |
35 G beveled NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF36BL2 |
36 G blunt NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NF36BV-2 |
36 G beveled NanoFil needle (pkg of 2) |
|
|
|
|
|
|
NFGSK-5 |
Spare Gasket for NanoFil & Holder (pkg of 5) |
|
|
|
|
|
|
NFINHLD |
NanoFil Injection Holder |
|
|
|
|
|
|
NFQ34-5 |
34 Gauge Flexible Quartz Tubing for filling (pkg 5) |
|
|
|
|
|
|
NI15 |
Ni/Cr ribbon, 1.5mm, sharp taper, (pkg/10 x 1-ft) |
|
|
|
|
|
|
NI15PF |
Ni/Cr ribbon, 1.5mm Preformed, sharp taper, (pkg/10) |
|
|
|
|
|
|
NI30 |
Ni/Cr ribbon, 3.0mm, medium taper, (pkg/10 x 1-ft) |
|
|
|
|
|
|
NI30PF |
Ni/Cr ribbon, 3.0mm Preformed, medium taper, (pkg/10) |
|
|
|
|
|
|
NI60 |
Ni/Cr ribbon, 6.0mm, long taper, (pkg/10 x 1-ft) |
|
|
|
|
|
|
NI60PF |
Ni/Cr ribbon, 6.0mm Preformed, long taper, (pkg/10) |
|
|
|
|
|
|
NITRALYZER-II |
Nitrate to Nitrite Reduction Kit (100 - 500 conversions) |
|
|
|
|
|
|
NMPH1 |
Beetrode, 2 mm receptacle |
|
|
|
|
|
|
NMPH2 |
Beetrode with 1 meter cable (unterminated) |
|
|
|
|
|
|
NMPH2B |
Beetrode with BNC cable, 1 meter |
|
|
|
|
|
|
NMPH2-LF |
Beetrode, Luer tip with 1 meter cable (unterminated) |
|
|
|
|
|
|
NMPH3 |
Dental Beetrode, 45°Bend, 2 mm receptacle |
|
|
|
|
|
|
NMPH3L |
Dental Beetrode with 2mm loop, 2mm receptacle |
|
|
|
|
|
|
NMPH5 |
Beetrode, 2mm receptacle |
|
|
|
|
|
|
NOCHM-4 |
4-Port closed Chamber for use with WPI's 2mm electrodes |
|
|
|
|
|
|
NOCHM-P |
Spare plug-adapter for ISO-NOP Nitric Oxide Electrode |
|
|
|
|
|
|
NOVA-186 |
NOVAFLEX Illuminator & Bifurcated Light guide |
|
|
|
|
|
|
NOVA-Z |
NOVAFLEX Fiber Optic Illuminator (230 V, 50 Hz) |
|
|
|
|
|
|
NSA-3 |
ISO-NO Activator (for three sensors) |
|
|
|
|
|
|
NVSL |
Manual Vibroslice |
|
|
|
|
|
|
NVSLM1 |
Motorized Vibroslice |
|
|
|
|
|
|
OFLV-200-850 |
Multi-bandpass order-sorting detector coating (per channel) |
|
|
|
|
|
|
OFLV-350-1000 |
Multi-bandpass order-sorting detector coating (per channel) |
|
|
|
|
|
|
OMEGA-Z |
Omega-Tip-Z with Probe & Holder |
|
|
|
|
|
|
OR320A |
METER, PH,320, W AG/AGCL, 110V |
|
|
|
|
|
|
OR320B |
METER, PH,320, W AG/AGCL, 220V |
|
|
|
|
|
|
OR720AP |
pH/ISE Meter, pH/Ref Electrode, 110V AC_Adapter |
|
|
|
|
|
|
OR720BP |
pH/ISE Meter, pH/Ref Electrode, 220V AC_Adapter |
|
|
|
|
|
|
OXELP |
Replacement Oxygen Electrode for ISO2 |
|
|
|
|
|
|
OXY-MICRO-AOT |
Single Channel Fiber-Optic Oxygen Meter (requires microsensors) |
|
|
|
|
|
|
OXY-MINI-AOT |
Single Channel Fiber-Optic Oxygen Meter (requires minisensors) |
|
|
|
|
|
|
P-5-10 |
5-Barrel Micropipette Blank (pkg of 10) |
|
|
|
|
|
|
P-5-50 |
5-Barrel Micropipette Blank (pkg of 50) |
|
|
|
|
|
|
P-7-10 |
7-Barrel Micropipette Blank (pkg of 10) |
|
|
|
|
|
|
PB150F-4 |
Glass, Piggyback, 1.51 mm, 0.75 mm x 4" (102 mm), Fil, Pkg/50 |
|
|
|
|
|
|
PB150F-6 |
Glass, Piggyback, 1.51 mm, 0.75 mm x 6" (152 mm), Fil, Pkg/50 |
|
|
|
|
|
|
PERIPRO-2H |
peri-star pro, 2-channel, high rate, large tubing |
|
|
|
|
|
|
PERIPRO-2H-220 |
peri-star pro, 2-channel, high rate, large tubing (220v) |
|
|
|
|
|
|
PERIPRO-4H |
peri-star pro, 4-channel, high rate, large tubing |
|
|
|
|
|
|
PERIPRO-4H-220 |
peri-star pro, 4-channel, high rate, large tubing (220v) |
|
|
|
|
|
|
PERIPRO-4L |
peri-star pro, 4-channel, low rate, small tubing |
|
|
|
|
|
|
PERIPRO-4L-220 |
peri-star pro, 4-channel, low rate, small tubing (220v) |
|
|
|
|
|
|
PERIPRO-8L |
peri-star pro, 8-channel, low rate, small tubing |
|
|
|
|
|
|
PERIPRO-8L-220 |
peri-star pro, 8-channel, low rate, small tubing (220v) |
|
|
|
|
|
|
PEROXYLUMINOL |
Hydrogen Peroxide Determination Kit |
|
|
|
|
|
|
PG10150-4 |
Patch Clamp Glass #0010, 1.5 mm, Pkg/100 |
|
|
|
|
|
|
PG10165-4 |
Patch Clamp Glass #0010, 1.65 mm, Pkg/100 |
|
|
|
|
|
|
PG52151-4 |
Patch Clamp Glass #7052, 1.5 mm, Pkg/100 |
|
|
|
|
|
|
PG52152-4 |
Patch Clamp Glass No Fil 1.5 mm, Pkg/100 |
|
|
|
|
|
|
PG52165-4 |
Patch Clamp Glass #7052, 1.65 mm, Pkg/100 |
|
|
|
|
|
|
PH-OPTICA-MICRO |
Fiber Optic pH Meter for microsensors |
|
|
|
|
|
|
PH-OPTICA-MINI |
Fiber Optic pH Meter for minisensors, foils & spots |
|
|
|
|
|
|
PHYSIO-II |
Physiology Kit II |
|
|
|
|
|
|
PI-305A |
Pressure Ejection Kit |
|
|
|
|
|
|
PM015D |
Pressure Manometer (15 psi) |
|
|
|
|
|
|
PM015R |
Pressure Manometer (15 psi), Rechargeable |
|
|
|
|
|
|
PM01R |
Pressure Manometer (1 psi), Rechargeable |
|
|
|
|
|
|
PM100D |
Pressure Manometer (100 psi) |
|
|
|
|
|
|
PM100R |
Pressure Manometer (100 psi), Rechargeable |
|
|
|
|
|
|
PM5 |
Remote Controller for MPM10 |
|
|
|
|
|
|
PM6 |
Replacement Electrode Holder for MPM10 |
|
|
|
|
|
|
PM7 |
Replacement Electrode Holder for MPM20 |
|
|
|
|
|
|
PMP-107 |
Programmable Multipipette Puller, 110V |
|
|
|
|
|
|
PMP-107-Z |
Programmable Multipipette Puller, 220V |
|
|
|
|
|
|
PNEU01 |
Pressure Sensor, 1 psi gauge |
|
|
|
|
|
|
PNEU05 |
Pressure Sensor, 5 psi gauge |
|
|
|
|
|
|
PNEU15 |
Pressure Sensor, 15 psi gauge |
|
|
|
|
|
|
PPM5000 |
PiezoPatch™ Micromanipulator with Joystick Control |
|
|
|
|
|
|
PRSIM |
Pressure Stimulator |
|
|
|
|
|
|
PSMB5 |
Binocular SurgioScope, F200 objective |
|
|
|
|
|
|
PSMT5 |
Trinoclular SurgioScope, beam splitter, std video adapter, F200
objective |
|
|
|
|
|
|
PT0110 |
Platinum/Iridium Wire, 0.001" (0.025 mm), 10 ft (3 m) |
|
|
|
|
|
|
PT0203 |
Platinum/Iridium Wire, 0.002" (0.051 mm), 3 ft (92 cm) |
|
|
|
|
|
|
PT0303 |
Platinum/Iridium Wire, 0.003" (0.076 mm), 3 ft (92 cm) |
|
|
|
|
|
|
PT0402 |
Platinum/Iridium Wire, 0.004" (0.102 mm), 2 ft (61 cm) |
|
|
|
|
|
|
PT1002 |
Platinum/Iridium Wire, 0.010" (0.25 mm), 2 ft (61 cm) |
|
|
|
|
|
|
PTM123B05KT |
Platinum Iridium Microelectrode (pkg of 5) |
|
|
|
|
|
|
PTM123B10KT |
Platinum Iridium Microelectrode (pkg of 5) |
|
|
|
|
|
|
PTM123B20KT |
Platinum Iridium Microelectrode (pkg of 5) |
|
|
|
|
|
|
PTM23B05 |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B05KT |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B10 |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B10KT |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B10KTH |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B20 |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23B20KT |
Platinum Iridium Microelectrode (Box of 10) |
|
|
|
|
|
|
PTM23Bxx |
Sample Kit, PTM23B05KT (4), PTM23B10KT (3), PTM23B20KT (3) |
|
|
|
|
|
|
PTM23BxxKT |
Sample Kit, PTM23B05 (3), PTM23B10 (3), PTM23B20 (4) |
|
|
|
|
|
|
PTM23CC001INS |
Platinum/Iridium Microelectrode, insulated (pkg 5) |
|
|
|
|
|
|
PTM23CC001NON |
Platinum/Iridium Microelectrode, uninsulated (pkg 5) |
|
|
|
|
|
|
PTM3CC02INS |
Platinum/Iridium Microelectrode, uninsulated (pkg 5) |
|
|
|
|
|
|
PTP101 |
Platinum Wire, 0.010" (0.25 mm), 1 ft (30 cm) |
|
|
|
|
|
|
PTP201 |
Platinum Wire, 0.020" (0.5 mm), 1 ft (30 cm) |
|
|
|
|
|
|
PTP401 |
Platinum Wire, 0.039" (1.0 mm), 1 ft (30 cm) |
|
|
|
|
|
|
PTP406 |
Platinum Wire, 0.039" (1.0 mm), 0.5 ft (15 cm) |
|
|
|
|
|
|
PTT0110 |
Platinum/Iridium Wire, Teflon Coated, 0.001" (0.025 mm), 10 ft (3 m) |
|
|
|
|
|
|
PTT0203 |
Platinum/Iridium Wire, Teflon Coated, 0.002" (0.051 mm), 3 ft (92 cm) |
|
|
|
|
|
|
PTT0402 |
Platinum/Iridium Wire, Teflon Coated, 0.004" (0.102 mm), 2 ft (61 cm) |
|
|
|
|
|
|
PTT0502 |
Platinum/Iridium Wire, Teflon Coated, 0.005" (0.125 mm), 2 ft (61 cm) |
|
|
|
|
|
|
PUC-Y |
Pulsating Ultrasonic Cleaner (110V) |
|
|
|
|
|
|
PUL-2 |
TWO STAGE MICROPIPETTE PULLER |
|
|
|
|
|
|
PV820 |
PicoPump with hold pressure |
|
|
|
|
|
|
PV830 |
PicoPump with hold pressure and vacuum |
|
|
|
|
|
|
PZMIII |
Precision Stereo Zoom Microscope (III) |
|
|
|
|
|
|
PZMIII-AAC |
PZMIII Microscope on Articulated Arm with Table Clamp |
|
|
|
|
|
|
PZMIII-BS |
PZMIII Microscope with Boom Stand |
|
|
|
|
|
|
PZMIV |
Precision Stereo Zoom Binocular Microscope IV, with Track Stand |
|
|
|
|
|
|
PZMIV-AAC |
Precision Stereo Zoom Binocular Microscope IV, with Articulated Arm |
|
|
|
|
|
|
PZMIV-BS |
Precision Stereo Zoom Binocular Microscope IV, with Boom Stand |
|
|
|
|
|
|
PZMTIII |
Precision Stereo ZoomTrinocular Microscope (III) |
|
|
|
|
|
|
PZMTIII-AAC |
PZMTIII Microscope on Articulated Arm with Table Clamp |
|
|
|
|
|
|
PZMTIII-AAC-CCTV |
PZMTIII Microscope Video System with Articulated Arm |
|
|
|
|
|
|
PZMTIII-BS |
PZMTIII Microscope with Boom Stand |
|
|
|
|
|
|
PZMTIII-BS-CCTV |
PZMTIII Microscope Video System with Boom Stand |
|
|
|
|
|
|
PZMTIII-CCTV |
PZMTIII Microscope Video System |
|
|
|
|
|
|
PZMTIV |
Precision Stereo Zoom Trinocular Microscope IV, with Track Stand |
|
|
|
|
|
|
PZMTIV-AAC |
Precision Stereo Zoom Trinocular Microscope IV, with Articulated Arm |
|
|
|
|
|
|
PZMTIV-BCS |
Precision Stereo Zoom Trinocular Microscope IV, with Boom Clamp Stand |
|
|
|
|
|
|
PZMTIV-BS |
Precision Stereo Zoom Trinocular Microscope IV, with Boom Stand |
|
|
|
|
|
|
PZMTIV-CCTV |
PZMTIV Microscope Video System |
|
|
|
|
|
|
R-8-8-WPI-01 |
Ring Light Guide for PZM and PZMIII Series |
|
|
|
|
|
|
RATKIT |
Rat Kit |
|
|
|
|
|
|
RBMA-200C |
Adult Mouse, brain matrix, coronal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMA-200S |
Adult Mouse, brain matrix, sagittal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMA-300C |
Rat, 175-300g, brain matrix, coronal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMA-300S |
Rat, 175-300g, brain matrix, sagittal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMA-600C |
Rat, 300-600g, brain matrix, coronal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMA-600S |
Rat, 300-600g, brain matrix, sagittal slices, acrylic, 1mm |
|
|
|
|
|
|
RBMS-200C |
Adult Mouse, brain matrix, coronal slices, stainless steel, 1mm |
|
|
|
|
|
|
RBMS-200S |
Adult Mouse, brain matrix, sagittal slices, stainless steel, 1mm |
|
|
|
|
|
|
RBMS-300C |
Rat, 175-300g, brain matrix, coronal slices, stainless steel, 1mm |
|
|
|
|
|
|
RBMS-300S |
Rat, 175-300g, brain matrix, sagittal slices, stainless steel, 1mm |
|
|
|
|
|
|
RBMS-600C |
Rat, 300-600g, brain matrix, coronal slices, stainless steel, 1mm |
|
|
|
|
|
|
RBMS-600S |
Rat, 300-600g, brain matrix, sagittal slices, stainless steel, 1mm |
|
|
|
|
|
|
RC1 |
Reference Cell with 1.5 m lead |
|
|
|
|
|
|
RC1T |
Reference Cell, 1.5 m lead, 2 mm pin |
|
|
|
|
|
|
RC2 |
Reference Cell with 2.0 mm pin |
|
|
|
|
|
|
RC2F |
Reference Cell with female connector |
|
|
|
|
|
|
RC3 |
Reference Cell with epoxy body, 4.5mm diam x 50mm |
|
|
|
|
|
|
RC4 |
Reference Cell with glass body, 4.0mm diam x 75mm |
|
|
|
|
|
|
RC5 |
Reference Cell with glass body, 4.0mm diam x 50mm |
|
|
|
|
|
|
RC6 |
Reference Cell with glass body, 1.5mm diam x 50mm |
|
|
|
|
|
|
REF-UV |
Reflectance Probe |
|
|
|
|
|
|
REMS |
Automated Tissue Resistance Measuring System |
|
|
|
|
|
|
REMS KIT |
REMS Kit Electrode for Corning Costar HTS Transwell-24 |
|
|
|
|
|
|
REMS KIT-M |
REMS Kit Electrode for Millipore™ Multiscreen CaCo 96-well |
|
|
|
|
|
|
REMS-24 |
Replacement REMS STX Electrode for 24-well HTS Plate |
|
|
|
|
|
|
REMS-96 |
Replacement REMS STX Electrode for Millipore™ 96-well Plate |
|
|
|
|
|
|
RET-2 |
Rectal Probe, 0.125" tip, 5ft |
|
|
|
|
|
|
RET-3 |
Rectal Probe, 0.063" tip, 5ft |
|
|
|
|
|
|
RN0005 |
Replacement Needle for syringe SGE0005RN |
|
|
|
|
|
|
RN001 |
Replacement Needle for syringe SGE001RN |
|
|
|
|
|
|
RN005 |
Replacement Needle for syringe SGE005RN, 5-pack |
|
|
|
|
|
|
RN010 |
Replacement Needle for syringe SGE010RN, 5-pack |
|
|
|
|
|
|
RN025 |
Replacement Needle for syringes SGE025RN, SGE050RN, SGE100RN, 5-pack |
|
|
|
|
|
|
RPE-KIT |
Retinal Pigment Epithelium (RPE) injection kit (SilFlex tubing, gasket,
holder, and blunt tipmix) |
|
|
|
|
|
|
RTCL-10 |
Reticle in 10x Eyepiece, 0-90í, 200 divisions per mm |
|
|
|
|
|
|
RTCL-20 |
Reticle in 20x Eyepiece, 0-90í, 200 divisions per mm |
|
|
|
|
|
|
SBT-5 |
Thermocouple Switch Box |
|
|
|
|
|
|
SDR2 |
SUPER-Dri-Ref, 2 mm diam. |
|
|
|
|
|
|
SGE0005RN |
Syringe, 0.5 µl SGE 23 ga (0.63 mm) 70 mm long |
|
|
|
|
|
|
SGE001RN |
Syringe, 1.0 µl SGE 26 ga (0.47 mm) cone 70 mm long |
|
|
|
|
|
|
SGE005RN |
Syringe, 5 µl SGE 25 ga (0.50 mm) 50 mm long |
|
|
|
|
|
|
SGE010RNS |
Syringe, 10 µl SGE 26 ga (0.47 mm) 50 mm long |
|
|
|
|
|
|
SGE025RN |
Syringe, 25 µl SGE 25 ga (0.50 mm) 50 mm long |
|
|
|
|
|
|
SGE050RN |
Syringe, 50 µl SGE 25 ga (0.50 mm) 50 mm long |
|
|
|
|
|
|
SGE050TLL |
Syringe, Luer Fitting, SGE 50 µl Gas-tight Teflon Luer Lock 6/32 button |
|
|
|
|
|
|
SGE100RN |
Syringe, 100 µl SGE 25 ga (0.50 mm) 50 mm long |
|
|
|
|
|
|
SGE100TLL |
Syringe, Luer Fitting, SGE 100 µl Gas-tight, Teflon Luer Lock |
|
|
|
|
|
|
SGE250TLL |
Syringe, Luer Fitting (no needle), 250 µl SGE |
|
|
|
|
|
|
SI-40-8 |
Flexible Light Guide, 40 in. (102 cm) |
|
|
|
|
|
|
SI-72-8 |
Flexible Light Guide, 72 in. (183 cm) |
|
|
|
|
|
|
SILFLEX-2 |
SilFlex tubing (pkg of 2) |
|
|
|
|
|
|
SLIT-xxx |
10, 25, 50, 100, 200 micron (per channel) |
|
|
|
|
|
|
SM325 |
High Resolution 3-D Motorized Micromanipulator & Controller |
|
|
|
|
|
|
SM325-M |
High Resolution 3-D Motorized Micromanipulator |
|
|
|
|
|
|
SNAP100 |
SNAP, 100 mg vial |
|
|
|
|
|
|
SNAP25 |
SNAP, 25 mg vial |
|
|
|
|
|
|
SNAP50 |
SNAP, 50 mg vial |
|
|
|
|
|
|
SP100i |
Syringe Pump, Infusion (single) |
|
|
|
|
|
|
SP100iZ |
Syringe Pump, Infusion (single) 240 V |
|
|
|
|
|
|
SP101i |
Syringe Pump, Microdialysis (double, slow speed) |
|
|
|
|
|
|
SP101iZ |
Syringe Pump, Microdialysis (double, slow speed) 240 V |
|
|
|
|
|
|
SP120p |
Syringe Pump, Infusion-Withdrawal (double) |
|
|
|
|
|
|
SP120pZ |
Syringe Pump, Infusion-Withdrawal (double) 240 V |
|
|
|
|
|
|
SP200i |
Syringe Pump, Infusion (double) |
|
|
|
|
|
|
SP200iZ |
Syringe Pump, Infusion (double) 240 V |
|
|
|
|
|
|
SP210C |
Syringe Pump, Infusion-Withdrawal (Continuous Action) |
|
|
|
|
|
|
SP210CZ |
Syringe Pump, Infusion-Withdrawal (Continuous Action) 240V |
|
|
|
|
|
|
SP210iw |
Syringe Pump, Infusion & Withdrawal (double) |
|
|
|
|
|
|
SP210iwZ |
Syringe Pump, Infusion & Withdrawal (double) 240 V |
|
|
|
|
|
|
SP220i |
Syringe Pump, Infusion (multiple) |
|
|
|
|
|
|
SP220iZ |
Syringe Pump, Infusion (multiple) 240V |
|
|
|
|
|
|
SP230iw |
Syringe Pump, Infusion & Withdrawal (multiple) |
|
|
|
|
|
|
SP230iwZ |
Syringe Pump, Infusion & Withdrawal (multiple) 240 V |
|
|
|
|
|
|
SP250i |
Syringe Pump, Infusion (multiple, mixed volumes) |
|
|
|
|
|
|
SP250iZ |
Syringe Pump, Infusion (multiple, mixed volumes) 240 V |
|
|
|
|
|
|
SP260p |
Syringe Pump, Infusion-Withdrawal (double) |
|
|
|
|
|
|
SP260pZ |
Syringe Pump, Infusion-Withdrawal (double) 240 V |
|
|
|
|
|
|
SPECTRA-HR |
High Resolution Spectrometer |
|
|
|
|
|
|
SPECTRA-HR-CG |
High Resolution Composite Grating Spectrometer, 200-1100nm, 5µm slit,
1.0nm |
|
|
|
|
|
|
SPECTRA-MCX |
Multi-Channel Detector, Master Channel |
|
|
|
|
|
|
SPECTRASUITE |
Spectroscopy Software |
|
|
|
|
|
|
SPECTRASUITE-I |
Spectroscopy Software, upgrade from SpectraWare(tm) |
|
|
|
|
|
|
SPECTRASUITE-U |
Spectroscopy Software, online updates (1 year) |
|
|
|
|
|
|
SPECTRAUSB |
Fiber Optic Spectrometer, 200-850, 25µm slit, 1.5nm resolution |
|
|
|
|
|
|
SPECTRAUSB-CUV |
UV/VIS Cuvette Sampling |
|
|
|
|
|
|
SPECTRAUSB-DBL |
Dual Channel Detector, 200-850, 25µm slit, 1.5nm resolution |
|
|
|
|
|
|
SPECTRAUSBFL |
Fluorescent Detection System (increased sensitivity) |
|
|
|
|
|
|
SPECTRAUSBFLG |
Fiber Optic Spectrometer, 380-1050, 200µm slit, ~10nm resolution |
|
|
|
|
|
|
SPECTRAUSB-LWCC |
Visible Detection System (Colorimetric Flow-thru Detection) |
|
|
|
|
|
|
SPECTRAUSB-M2 |
Plug and Play USB Module |
|
|
|
|
|
|
SPECTRAUSB-NIR |
Fiber Optic Spectrometer, 380-1000, 25µm slit, ~10nm resolution |
|
|
|
|
|
|
SPECTRAUSB-SPT |
Microliter Sampling System with SPT |
|
|
|
|
|
|
SPG-KIT-CAL |
Serial Cable for Caliper (501601) |
|
|
|
|
|
|
SPG-KIT-MICRONR |
Optional Cable & Software Package |
|
|
|
|
|
|
SPT |
SpectroPipetter |
|
|
|
|
|
|
SPT-2 |
SpectroPipetter II (Optimal UV Efficiency) |
|
|
|
|
|
|
SPT-2-UCK |
SpectroPipetter II & Ultrasonic Cleaning Kit |
|
|
|
|
|
|
SPT-UCK |
SpectroPipetter & Ultrasonic Cleaning Kit |
|
|
|
|
|
|
SS31605 |
Stainless Steel Wire, 0.005" (0.125 mm), 50 ft (15.2 m) |
|
|
|
|
|
|
SS31614 |
Stainless Steel Wire, 0.014" (0.36 mm), 30 ft (9.1 m) |
|
|
|
|
|
|
SSM123B05KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 5) |
|
|
|
|
|
|
SSM123B10KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 5) |
|
|
|
|
|
|
SSM123B20KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 5) |
|
|
|
|
|
|
SSM33A05 |
Elgiloy/Stainless Steel Microelectrode (Box of 10) |
|
|
|
|
|
|
SSM33A05KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 10) |
|
|
|
|
|
|
SSM33A10 |
Elgiloy/Stainless Steel Microelectrode (Box of 10) |
|
|
|
|
|
|
SSM33A10KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 10) |
|
|
|
|
|
|
SSM33A120 |
Elgiloy/Stainless Steel Microelectrode (Box of 10) |
|
|
|
|
|
|
SSM33A20 |
Elgiloy/Stainless Steel Microelectrode (Box of 10) |
|
|
|
|
|
|
SSM33A20KT |
Elgiloy/Stainless Steel Microelectrode (pkg of 10) |
|
|
|
|
|
|
SSM33A70 |
Elgiloy/Stainless Steel Microelectrode (Box of 10) |
|
|
|
|
|
|
SST30407-25 |
Stainless Steel Wire, Teflon Coated, 0.007" (0.18 mm), 25 ft (7.6 m) |
|
|
|
|
|
|
SST30407-50 |
Stainless Steel Wire, Teflon Coated, 0.007" (0.18 mm), 50 ft (15.2 m) |
|
|
|
|
|
|
ST-HA |
Filter, Heat Absorbing |
|
|
|
|
|
|
STM3 |
Joystick Controller for DC3001 |
|
|
|
|
|
|
STX100C |
STX100 for Corning Costar HTS Transwell-24 |
|
|
|
|
|
|
STX100C96 |
STX100 for Corning 96 HTS Well Plate |
|
|
|
|
|
|
STX100F |
STX100 for Falcon HTS Multiwell Insert System |
|
|
|
|
|
|
STX100F96 |
STX100 for BD Falcon HTS 96 Multiwell Plate |
|
|
|
|
|
|
STX100M |
STX100 for Millipore Multiscreen™ CaCo 96 Well Plate |
|
|
|
|
|
|
STX-2 |
Replacement “Chopstick” Electrode Set |
|
|
|
|
|
|
STX-3 |
Adjustable Tip Spread “Chopstick” Electrode Set |
|
|
|
|
|
|
SUPERLUMINOL |
Superoxide/Reactive Oxygen Species Determination Kit |
|
|
|
|
|
|
SUPERLUMINOL-II |
SuperLuminol + PMA (1mg/solvent) |
|
|
|
|
|
|
SYLG184 |
Sylgard |
|
|
|
|
|
|
TAXIC-600 |
Lab Standard with 18°Ear Bars, with UMPII System |
|
|
|
|
|
|
TAXIC-603 |
Dual Manipulator Lab Standard with 18°Ear Bars, with UMPII System |
|
|
|
|
|
|
TAXIC-650 |
Lab Standard with 45°Ear Bars, with UMPII System |
|
|
|
|
|
|
TAXIC-653 |
Dual Manipulator Lab Standard with 45°Ear Bars, with UMPII System |
|
|
|
|
|
|
TB-1 |
Tilting Base |
|
|
|
|
|
|
TBM4M |
Transbridge Transducer Amplifier |
|
|
|
|
|
|
TBS |
Tilt Base with Screw Adjustment |
|
|
|
|
|
|
TCJ3050 |
Wire, Thermocouple (Iron + Constantan), Glass braid, 30 AWG, 50 ft (15.2
m) |
|
|
|
|
|
|
TCK3050 |
Wire, Thermocouple (Chromel + Alumel), Glass braid, 30 AWG, 50 ft (15.2
m) |
|
|
|
|
|
|
TGW0325 |
Tungsten Wire, 0.003" (0.075 mm), 25 ft (7.6 m) |
|
|
|
|
|
|
TGW0515 |
Tungsten Wire, 0.005" (0.125 mm), 15 ft (4.6 m) |
|
|
|
|
|
|
TGW1510 |
Tungsten Wire, 0.015" (0.38 mm), 10 ft (3 m) |
|
|
|
|
|
|
TI2051 |
Titanium Wire, 0.020" (0.5 mm), 25 ft (8.3 m) |
|
|
|
|
|
|
TI4024 |
Titanium Wire, 0.040" (1.0 mm), 24 ft (7.3 m) |
|
|
|
|
|
|
TIDAS-10CUV |
Cuvette changer for 10 cuvettes |
|
|
|
|
|
|
TIDAS2-LWCC |
TIDAS II - LWCC System (100cm pathlength) |
|
|
|
|
|
|
TIDAS-2-LWCC5 |
TIDAS II - LWCC System (5cm pathlength) |
|
|
|
|
|
|
TIDAS2-SPT |
TIDAS II - SPT System |
|
|
|
|
|
|
TIDAS-BASIC |
Tidas II Basic (stationary cuvette holder, Spectralys software) |
|
|
|
|
|
|
TIDAS-D2 |
Deuterium replacement lamp |
|
|
|
|
|
|
TIDAS-H |
Halogen replacement lamp, 2.2W |
|
|
|
|
|
|
TIDAS-H2 |
Halogen replacement lamp, 7.5W |
|
|
|
|
|
|
TIDAS-I |
Tidas I Spectrometer Module with Spectralys Software |
|
|
|
|
|
|
TIDASI-LWCC |
Tidas I - LWCC System (100cm pathlength) |
|
|
|
|
|
|
TIDAS-I-LWCC5 |
Tidas I - LWCC System (500cm pathlength) |
|
|
|
|
|
|
TIDAS-I-SPT |
Tidas I - SPT System |
|
|
|
|
|
|
TIDAS-I-TIP |
Tidas I DipTip System |
|
|
|
|
|
|
TIDAS-I-TIPUV |
Tidas I DipTip System |
|
|
|
|
|
|
TIDAS-NIST |
UV certification to NIST |
|
|
|
|
|
|
TIDAS-PHEUR |
UV certification to DAB & Ph. Eur. |
|
|
|
|
|
|
TIDAS-QUAD |
4-Channel Flow Detection System |
|
|
|
|
|
|
TIDAS-STIR |
Magnetic Stirrer |
|
|
|
|
|
|
TIDAS-TEMP |
Temperature control for stationary cuvette holder (10-100şC, ± 0.1şC) |
|
|
|
|
|
|
TIDAS-TEMP10 |
Temperature control for cuvette changer (20-40şC, ± 0.5şC) |
|
|
|
|
|
|
TIP01TW1F |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 0.1 µm tip, Fil |
|
|
|
|
|
|
TIP01TW1F-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 0.1 µm tip, Fil |
|
|
|
|
|
|
TIP02TW1F |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 0.2 µm tip, Fil |
|
|
|
|
|
|
TIP02TW1F-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 0.2 µm tip, Fil |
|
|
|
|
|
|
TIP03TW1F |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 0.3 µm tip, Fil |
|
|
|
|
|
|
TIP03TW1F-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 0.3 µm tip, Fil |
|
|
|
|
|
|
TIP04TW1F |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 0.4 µm tip, Fil |
|
|
|
|
|
|
TIP04TW1F-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 0.4 µm tip, Fil |
|
|
|
|
|
|
TIP05TW1F |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 0.5 µm tip, Fil |
|
|
|
|
|
|
TIP05TW1F-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 0.5 µm tip, Fil |
|
|
|
|
|
|
TIP10TW1 |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 10 µm tip, No Fil |
|
|
|
|
|
|
TIP10TW1-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 10 µm tip, No Fil |
|
|
|
|
|
|
TIP10TW1LS01 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 10 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIP10TW1LS02 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 10 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIP10XV119 |
Micropipettes for Nanoliter Injector (10) |
|
|
|
|
|
|
TIP1TW1 |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 1 µm tip, No Fil |
|
|
|
|
|
|
TIP1TW1-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 1 µm tip, No Fil |
|
|
|
|
|
|
TIP2TW1 |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 2 µm tip, No Fil |
|
|
|
|
|
|
TIP2TW1-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 2 µm tip, No Fil |
|
|
|
|
|
|
TIP30TW1 |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 30 µm tip, No Fil |
|
|
|
|
|
|
TIP30TW1-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 30 µm tip, No Fil |
|
|
|
|
|
|
TIP30TW1LS01 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 30 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIP30TW1LS02 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 30 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIP5TW1 |
µTip™, Plain Shank, 1.0 mm, Thin-Wall, 5 µm tip, No Fil |
|
|
|
|
|
|
TIP5TW1-L |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 5 µm tip, No Fil |
|
|
|
|
|
|
TIP5TW1LS01 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 5 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIP5TW1LS02 |
µTip™, Luer Shank, 1.0 mm, Thin-Wall, 5 µm tip, No Fil, Silanized Tip |
|
|
|
|
|
|
TIPCA |
Calcium Electrode Tips (3) |
|
|
|
|
|
|
TIPH |
Hydrogen Electrode Tips (3) |
|
|
|
|
|
|
TIPK |
Potassium Electrode Tips (3) |
|
|
|
|
|
|
TIPTPP |
TPP+ (Tetraphenylphosphonium) Electrode Tips (3) |
|
|
|
|
|
|
TIPTW900A |
Prepulled Micropipette for 900A (1 mm thin-wall, 2 m tip) (pkg of 10) |
|
|
|
|
|
|
TM123A05KT |
Tungsten Microelectrode (pkg of 5) |
|
|
|
|
|
|
TM123A10KT |
Tungsten Microelectrode (pkg of 5) |
|
|
|
|
|
|
TM123A20KT |
Tungsten Microelectrode (pkg of 5) |
|
|
|
|
|
|
TM31/33Axx |
Sample Kit, TM33A05 (2), TM33A10 (3), TM33A20 (3), TM31A50 (2) |
|
|
|
|
|
|
TM31/33AxxKT |
Sample Kit, TM33A05KT (2), TM33A10KT (3), TM33A20KT (3), TM31A50KT (2) |
|
|
|
|
|
|
TM31A10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31A10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31A20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31A20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31A50 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31A50KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C40 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM31C40KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33A20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B01 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B01KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33B20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33Bxx |
Sample Kit, TM33B01 (2), TM33B05 (2), TM33B10 (3), TM33B20 (3) |
|
|
|
|
|
|
TM33BxxKT |
Sample Kit, TM33B01KT (3), TM33B05KT (2), TM33B10KT (3), TM33B20KT (2) |
|
|
|
|
|
|
TM33C05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C40 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33C40KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM33CCINS |
Tungsten Microelectrode, insulated (pkg 5) |
|
|
|
|
|
|
TM33CCNON |
Tungsten Microelectrode, uninsulated (pkg 5) |
|
|
|
|
|
|
TM53A05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A15 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A15KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53A20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53Axx |
Sample Kit, TM53A05 (3), TM53A10 (3), TM53A20 (4) |
|
|
|
|
|
|
TM53AxxKT |
Sample Kit, TM53A05KT (3), TM53A10KT (3), TM53A20KT (4) |
|
|
|
|
|
|
TM53B05 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53B05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53B10 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53B10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53B20 |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53B20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TM53CCINS |
Tungsten Microelectrode, insulated (pkg 5) |
|
|
|
|
|
|
TM53CCNON |
Tungsten Microelectrode, uninsulated (pkg 5) |
|
|
|
|
|
|
TPC-4/PTU |
Thermal Microscope Stage w/Pump & Tank Unit |
|
|
|
|
|
|
TPC-4ER/PTU |
Thermal Microscope Stage (ext range) w/Pump & Tank Unit |
|
|
|
|
|
|
TPC-4LPD |
Thermal Microscope Stae, accommodates 100mm petri dish |
|
|
|
|
|
|
TPC-4SPD |
Thermal Microscope Stage , accommodates 35mm petri dish |
|
|
|
|
|
|
TR-TIP-xx |
Replacement Tip (specify 2mm, 5mm or 10mm) |
|
|
|
|
|
|
TR-UV |
Transmission probe with 1 tip (specify 2, 5 or 10mm) |
|
|
|
|
|
|
TS-4 |
Thermal Microscope Stage & Controller |
|
|
|
|
|
|
TS-4ER |
Thermal Microscope Stage & Controller (extended Range) |
|
|
|
|
|
|
TS-4SPDER |
Thermal Microscope State, (ext range) 35 mm petri dish |
|
|
|
|
|
|
TST150-6 |
Glass, Thick Septum Theta, 1.5 mm x 6" (152 mm), Pkg/100 |
|
|
|
|
|
|
TST33A05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST33A10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST33A20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST33AxKT |
Sample Kit, TST33A05KT (3), TST33A10KT (4), TST33A20KT (3) |
|
|
|
|
|
|
TST33C05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST33C10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST33C20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST53A05KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST53A10KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST53A20KT |
Tungsten Microelectrode (Box of 10) |
|
|
|
|
|
|
TST53AxKT |
Sample Kit, TST53A05KT (3), TST53A10KT (4), TST53A20KT (3) |
|
|
|
|
|
|
TW100-3 |
Glass, Thin-Wall, 1.0 mm x 3" (76 mm), Pkg/500 |
|
|
|
|
|
|
TW100-4 |
Glass, Thin-Wall, 1.0 mm x 4" (102 mm), Pkg/500 |
|
|
|
|
|
|
TW100-6 |
Glass, Thin-Wall, 1.0 mm x 6" (152 mm), Pkg/500 |
|
|
|
|
|
|
TW100F-3 |
Glass, Thin-Wall, 1.0 mm x 3" (76 mm), Fil, Pkg/500 |
|
|
|
|
|
|
TW100F-4 |
Glass, Thin-Wall, 1.0 mm x 4" (102 mm), Fil, Pkg/500 |
|
|
|
|
|
|
TW100F-6 |
Glass, Thin-Wall, 1.0 mm x 6" (152 mm), Fil, Pkg/500 |
|
|
|
|
|
|
TW120-3 |
Glass, Thin-Wall, 1.2 mm x 3" (76 mm), Pkg/350 |
|
|
|
|
|
|
TW120-4 |
Glass, Thin-Wall, 1.2 mm x 4" (102 mm), Pkg/350 |
|
|
|
|
|
|
TW120-6 |
Glass, Thin-Wall, 1.2 mm x 6" (152 mm), Pkg/350 |
|
|
|
|
|
|
TW120F-3 |
Glass, Thin-Wall, 1.2 mm x 3" (76 mm), Fil, Pkg/350 |
|
|
|
|
|
|
TW120F-4 |
Glass, Thin-Wall, 1.2 mm x 4" (102 mm), Fil, Pkg/350 |
|
|
|
|
|
|
TW120F-6 |
Glass, Thin-Wall, 1.2 mm x 6" (152 mm), Fil, Pkg/350 |
|
|
|
|
|
|
TW150-3 |
Glass, Thin-Wall, 1.5 mm x 3" (76 mm), Pkg/300 |
|
|
|
|
|
|
TW150-4 |
Glass, Thin-Wall, 1.5 mm x 4" (102 mm), Pkg/300 |
|
|
|
|
|
|
TW150-6 |
Glass, Thin-Wall, 1.5 mm x 6" (152 mm), Pkg/225 |
|
|
|
|
|
|
TW150F-3 |
Glass, Thin-Wall, 1.5 mm x 3" (76 mm), Fil, Pkg/300 |
|
|
|
|
|
|
TW150F-4 |
Glass, Thin-Wall, 1.5 mm x 4" (102 mm), Fil, Pkg/225 |
|
|
|
|
|
|
TW150F-6 |
Glass, Thin-Wall, 1.5 mm x 6" (152 mm), Fil, Pkg/225 |
|
|
|
|
|
|
UBATH-B |
Ultrasonic Cleaner (220V, UK plug) |
|
|
|
|
|
|
UBATH-Y |
Ultrasonic Cleaner (110V) |
|
|
|
|
|
|
UBATH-Z |
Ultrasonic Cleaner (220V, Euro plug) |
|
|
|
|
|
|
UCK |
Ultrasonic Cleaning Kit |
|
|
|
|
|
|
UMP3 |
UltraMicroPump 3 (without controller) |
|
|
|
|
|
|
UMP3-1 |
UltraMicroPump 3 (one) and Micro4 Controller |
|
|
|
|
|
|
UMP3-2 |
UltraMicroPump 3 (two) and Micro4 Controller |
|
|
|
|
|
|
UMP3-3 |
UltraMicroPump 3 (three) and Micro4 Controller |
|
|
|
|
|
|
UMP3-4 |
UltraMicroPump 3 (four) and Micro4 Controller |
|
|
|
|
|
|
UPGRADE-APOLLO |
Converts APOLLO4000-2 to APOLLO4000-4 |
|
|
|
|
|
|
UPUV |
Ultrapath System, Ultraviolet & Visible Light |
|
|
|
|
|
|
UPVIS |
Ultrapath System, Visible Light |
|
|
|
|
|
|
USBCAM-3M |
3.1 Megapixel Digital Eyepiece Camera |
|
|
|
|
|
|
USBCON |
Attachable Light Source Adapter for SPECTRAUSB |
|
|
|
|
|
|
USBUV |
Attachable Light Source [200-1100nm] with Cuvette Holder |
|
|
|
|
|
|
USBVIS |
Attachbale Light Source [390-900nm] with Cuvette Holder |
|
|
|
|
|
|
USS1L |
Medium Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS1S |
Medium Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS2L |
Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS2S |
Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS3L |
Large Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS3S |
Large Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS4L |
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS4S |
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS5L |
Snap Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS5M12L |
Millipore Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS5M12S |
Millipore Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS5S |
Snap Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS6L |
Small Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS6S |
Small Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS7L |
Large Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS7S |
Large Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS8L |
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
USS8S |
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing |
|
|
|
|
|
|
UV2 |
UV Detector Upgrade for USB/S2000 series (per channel) |
|
|
|
|
|
|
VCAMBW PAL-B |
B&W CCD Video Camera (240 V, British plug) |
|
|
|
|
|
|
VCAMBW PAL-Z |
B&W CCD Video Camera (240 V, Euro plug) |
|
|
|
|
|
|
VCAMBWNTSC |
B&W CCD Video Camera (120 V, US plug) |
|
|
|
|
|
|
VETBOND |
Vetbond Adhesive |
|
|
|
|
|
|
VFP |
Vibration-Free Platform |
|
|
|
|
|
|
VFW |
Vibration-Free Workstation |
|
|
|
|
|
|
VSLM1C |
Spare Bath Chamber |
|
|
|
|
|
|
VSLM1H |
Spare Specimen Holder |
|
|
|
|
|
|
WPI-118 |
High Performance Digital Data Recorder |
|
|
|
|
|
|
WSA1001 |
ATP Sensor (5 pk) |
|
|
|
|
|
|
WSA1002 |
ATP Null Sensors (5 pk) |
|
|
|
|
|
|
WSA1003 |
Adenosine Sensors (5 pk) |
|
|
|
|
|
|
WSA1004 |
Inosine Sensors (5 pk) |
|
|
|
|
|
|
WSA2001 |
ATP Probes, Starter Kit |
|
|
|
|
|
|
WSA2003 |
Adenosine Starter Kit (5 ea - Adenosine, Null, reference electrode,
calibration bottles) |
|
|
|
|
|
|
xxxxD |
Drain option (add “D” to part number of chamber or system) |
|
|
|
|
|
|
ZBEECAL |
Level Shifting Device |
|
|
|
|
|
|